Boyi Fu

Solvent Based Hydrogen Bonding: Impact on Poly(3-hexylthiophene) Nanoscale Morphology and Charge Transport Characteristics

We demonstrate that supramolecular assembly and subsequent enhancement of charge transport characteristics of conjugated polymers can be facilitated simply by adding small amounts of a more volatile poor solvent, which can hydrogen bond with the majority solvent. Addition of up to 2 vol % acetone to a precursor solution of poly(3-hexylthiophene) (P3HT) in chloroform leads to approximately a 4-fold increase in P3HT field-effect mobility. The improvement is associated with hydrogen bonding interactions between acetone and chloroform which decrease the evaporation rate of the mixed solvent. P3HT is less soluble in the binary solvent than in the more readily vaporized chloroform component, and this characteristic enables the supramolecular assembly of P3HT chains at the nanoscale. Two-dimensional molecular ordering of the polymer film was controlled by varying the quantity of poor solvent added to the precursor solution, and the correlation between field-effect mobility and molecular ordering was investigated. Hansen solubility parameters were used to systematically understand how the solvent mixture enhances the alignment and assembly of polymer chains and influences subsequent thin film properties. The value of the relative energy difference (RED) of the solvent with respect to P3HT increased from less than 1 to more than 1 during film formation, which indicates that the solvent characteristics are initially those of a good solvent but transform into those of a poor dissolution medium. A mechanistic illustration of the molecular ordering process during film formation is postulated.

Conjugated Polymer Alignment: Synergisms Derived from Microfluidic Shear Design and UV Irradiation

Solution shearing has attracted great interest for the fabrication of robust and reliable, high performance organic electronic devices, owing to applicability of the method to large area and continuous fabrication, as well as its propensity to enhance semiconductor charge transport characteristics. To date, effects of the design of the blade shear features (especially the microfluidic shear design) and the prospect of synergistically combining the shear approach with an alternate process strategy have not been investigated. Here, a generic thin film fabrication concept that enhanced conjugated polymer intermolecular alignment and aggregation, improved orientation (both nanoscale and long-range), and narrowed the π-π stacking distance is demonstrated for the first time. The impact of the design of shearing blade microfluidic channels and synergistic effects of fluid shearing design with concomitant irradiation strategies were demonstrated, enabling fabrication of polymer-based devices with requisite morphologies for a range of applications.

Enhanced Mobility and Effective Control of Threshold Voltage in P3HT-Based Field-Effect Transistors via Inclusion of Oligothiophenes

Improved organic field-effect transistor (OFET) performance through a polymer-oligomer semiconductor blend approach is demonstrated. Incorporation of 2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene (BTTT) into poly(3-hexylthiophene) (P3HT) thin films leads to approximately a 5-fold increase in charge carrier mobility, a 10-fold increase in current on-off ratio, and concomitantly, a decreased threshold voltage to as low as 1.7 V in comparison to single component thin films. The blend approach required no pre- and/or post treatments, and processing was conducted under ambient conditions. The correlation of crystallinity, surface morphology and photophysical properties of the blend thin films was systematically investigated via X-ray diffraction, atomic force microscopy and optical absorption measurements respectively, as a function of blend composition. The dependence of thin-film morphology on the blend composition is illustrated for the P3HT:BTTT system. The blend approach provides an alternative avenue to combine the advantageous properties of conjugated polymers and oligomers for optimized semiconductor performance.

Flow Effects on the Controlled Growth of Nanostructured Networks at Microcapillary Walls for Applications in Continuous Flow Reactions

Low-cost microfluidic devices are desirable for many chemical processes; however, access to robust, inert, and appropriately structured materials for the inner channel wall is severely limited. Here, the shear force within confined microchannels was tuned through control of reactant solution fluid-flow and shown to dramatically impact nano- through microstructure growth. Combined use of experimental results and simulations allowed controlled growth of 3D networked Zn(OH)F nanostructures with uniform pore distributions and large fluid contact areas on inner microchannel walls. These attributes facilitated subsequent preparation of uniformly distributed Pd and PdPt networks with high structural and chemical stability using a facile, in situ conversion method. The advantageous properties of the microchannel based catalytic system were demonstrated using microwave-assisted continuous-flow coupling as a representative reaction. High conversion rates and good recyclability were obtained. Controlling materials nanostructure via fluid-flow-enhanced growth affords a general strategy to optimize the structure of an inner microchannel wall for desired attributes. The approach provides a promising pathway toward versatile, high-performance, and low-cost microfluidic devices for continuous-flow chemical processes.

Vertical Stratification Engineering for Organic Bulk-Heterojunction Devices

High-efficiency organic solar cells (OSCs) can be produced through optimization of component molecular design, coupled with interfacial engineering and control of active layer morphology. However, vertical stratification of the bulk-heterojunction (BHJ), a spontaneous activity that occurs during the drying process, remains an intricate problem yet to be solved. Routes toward regulating the vertical separation profile and evaluating the effects on the final device should be explored to further enhance the performance of OSCs. Herein, we establish a connection between the material surface energy, absorption, and vertical stratification, which can then be linked to photovoltaic conversion characteristics. Through assessing the performance of temporary, artificial vertically stratified layers created by the sequential casting of the individual components to form a multilayered structure, optimal vertical stratification can be achieved. Adjusting the surface energy offset between the substrate results in donor and acceptor stabilization of that stratified layer. Further, a trade-off between the photocurrent generated in the visible region and the amount of donor or acceptor in close proximity to the electrode was observed. Modification of the substrate surface energy was achieved using self-assembled small molecules (SASM), which, in turn, directly impacted the polymer donor to acceptor ratio at the interface. Using three different donor polymers in conjunction with two alternative acceptors in an inverted organic solar cell architecture, the concentration of polymer donor molecules at the ITO (indium tin oxide)/BHJ interface could be increased relative to the acceptor. Appropriate selection of SASM facilitated a synchronized enhancement in external quantum efficiency and power conversion efficiencies over 10.5%.