Mincheol Chang

Solvent Based Hydrogen Bonding: Impact on Poly(3-hexylthiophene) Nanoscale Morphology and Charge Transport Characteristics

We demonstrate that supramolecular assembly and subsequent enhancement of charge transport characteristics of conjugated polymers can be facilitated simply by adding small amounts of a more volatile poor solvent, which can hydrogen bond with the majority solvent. Addition of up to 2 vol % acetone to a precursor solution of poly(3-hexylthiophene) (P3HT) in chloroform leads to approximately a 4-fold increase in P3HT field-effect mobility. The improvement is associated with hydrogen bonding interactions between acetone and chloroform which decrease the evaporation rate of the mixed solvent. P3HT is less soluble in the binary solvent than in the more readily vaporized chloroform component, and this characteristic enables the supramolecular assembly of P3HT chains at the nanoscale. Two-dimensional molecular ordering of the polymer film was controlled by varying the quantity of poor solvent added to the precursor solution, and the correlation between field-effect mobility and molecular ordering was investigated. Hansen solubility parameters were used to systematically understand how the solvent mixture enhances the alignment and assembly of polymer chains and influences subsequent thin film properties. The value of the relative energy difference (RED) of the solvent with respect to P3HT increased from less than 1 to more than 1 during film formation, which indicates that the solvent characteristics are initially those of a good solvent but transform into those of a poor dissolution medium. A mechanistic illustration of the molecular ordering process during film formation is postulated.

Imparting Chemical Stability in Nanoparticulate Silver via a Conjugated Polymer Casing Approach

Only limited information is available on the design and synthesis of functional materials for preventing corrosion of metal nanostructures. In the nanometer regime, even noble metals are subject to chemical attack. Here, the corrosion behavior of noble metal nanoparticles coated with a conjugated polymer nanolayer was explored for the first time. Specifically, electrochemical corrosion and sulfur tarnishing behaviors were examined for Ag-polypyrrole (PPy) core-shell nanoparticles using potentiodynamic polarization and spectrophotometric analysis, respectively. First, the Ag-PPy nanoparticles exhibited enhanced resistance to electrochemically induced corrosion compared to their exposed silver counterparts. Briefly, a neutral PPy shell provided the highest protection efficiency (75.5%), followed by sulfate ion- (61.3%) and dodecylbenzenesulfonate ion- (53.6%) doped PPy shells. However, the doping of the PPy shell with chloride ion induced an adverse effect (protection efficiency, -120%). Second, upon exposure to sulfide ions, the Ag-PPy nanoparticles preserved their morphology and colloidal stability while the bare silver analog underwent significant structural deformation. To further understand the function of the PPy shell as a protection layer for the silver core, the catalytic activity of the nanostructures was also evaluated. Using the reduction of 4-nitrophenol as a representative example of a catalytic reaction, the rate constant for that reduction using the PPy encased Ag nanoparticles was found to be 1.1 × 10(-3) s(-1), which is approximately 33% less than that determined for the parent silver. These results demonstrate that PPy can serve as both an electrical and chemical barrier for mitigating undesirable chemical degradation in corrosive environments, as well as provide a simple physical barrier to corrosive substances under appropriate conditions.

Anisotropic Assembly of Conjugated Polymer Nanocrystallites for Enhanced Charge Transport

The anisotropic assembly of P3HT nanocrystallites into longer nanofibrillar structures was demonstrated via sequential UV irradiation after ultrasonication to the pristine polymer solutions. The morphology of resultant films was studied by atomic force microscopy (AFM), and quantitative analysis of intra- and intermolecular ordering of polymer chains was performed by means of static absorption spectroscopy and quantitative modeling. Consequently, the approach to treat the precursor solution enhanced intra- and intermolecular ordering and reduced the incidence of grain boundaries within P3HT films, which contributed to the excellent charge carrier transport characteristics of the corresponding films (μ ≈ 12.0 × 10(-2) cm(2) V(-1) s(-1) for 96% RR P3HT).

Toward Uniformly Dispersed Battery Electrode Composite Materials: Characteristics and Performance

Battery electrodes are complex mesoscale systems comprised of electroactive components, conductive additives, and binders. In this report, methods for processing electrodes with dispersion of the components are described. To investigate the degree of material dispersion, a spin-coating technique was adopted to provide a thin, uniform layer that enabled observation of the morphology. Distinct differences in the distribution profile of the electrode components arising from individual materials physical affinities were readily identified. Hansen solubility parameter (HSP) analysis revealed pertinent surface interactions associated with materials dispersivity. Further studies demonstrated that HSPs can provide an effective strategy to identify surface modification approaches for improved dispersions of battery electrode materials. Specifically, introduction of surfactantlike functionality such as oleic acid (OA) capping and P3HT-conjugated polymer wrapping on the surface of nanomaterials significantly enhanced material dispersity over the composite electrode. The approach to the surface treatment on the basis of HSP study can facilitate design of composite electrodes with uniformly dispersed morphology and may contribute to enhancing their electrical and electrochemical behaviors. The conductivity of the composites and their electrochemical performance was also characterized. The study illustrates the importance of considering electronic conductivity, electron transfer, and ion transport in the design of environments incorporating active nanomaterials.

Photoinduced Anisotropic Assembly of Conjugated Polymers in Insulating Polymer Blends

Low-dose UV irradiation of poly(3-hexylthiophene) (P3HT)-insulating polymer (polystyrene (PS) or polyisobutylene (PIB)) blend solutions led to the formation of highly ordered P3HT nanofibrillar structures in solidified thin films. The P3HT nanofibers were effectively interconnected through P3HT islands phase-separated from insulating polymer regions in blend films comprising a relatively low fraction of P3HT. Films prepared with a P3HT content as low as 5 wt % exhibited excellent macroscopic charge transport characteristics. The impact of PS on P3HT intramolecular and intermolecular interactions was systematically investigated. The presence of PS chains appeared to assist in the UV irradiation process of the blend solutions to facilitate molecular interactions of the semiconductor component, and to enhance P3HT chain interactions during spin coating because of relatively unfavorable P3HT-PS chain interactions. However, P3HT lamellar packing was hindered in the presence of PS chains, because of favorable hydrophobic interactions between the P3HT hexyl substituents and the PS chains. As a result, the lamellar packing d-spacing increased, and the coherence length corresponding to the lamellar packing decreased, as the amount of PS in the blend films increased.

Macroscopic Alignment of One-Dimensional Conjugated Polymer Nanocrystallites for High-Mobility Organic Field-Effect Transistors

Controlling the morphology of polymer semiconductors remains a fundamental challenge that hinders their widespread applications in electronic and optoelectronic devices and commercial feasibility. Although conjugated polymer nanowires (NWs) are envisioned to afford high charge-carrier mobility, the alignment of preformed conjugated polymer NWs has not been reported. Here, we demonstrate an extremely simple and effective strategy to generate well-aligned arrays of one-dimensional (1D) polymer semiconductors that exhibit remarkable enhancement in charge transport using a solution shear-coating technique. We show that solution shear coating of poly(alkylthiophene) NWs induces extension or coplanarization of the polymer backbone and highly aligned network films, which results in enhanced intra- and intermolecular ordering and reduced grain boundaries. Consequently, highly aligned poly(3-hexylthiophene) NWs exhibited over 33-fold enhancement in the average carrier mobility, with the highest mobility of 0.32 cm(2) V(-1) s(-1) compared to pristine films. The presented platform is a promising strategy and general approach for achieving well-aligned 1D nanostructures of polymer semiconductors and could enable the next generation of high-performance flexible electronic devices for a wide range of applications.

An approach to core–shell nanostructured materials with high colloidal and chemical stability: synthesis, characterization and mechanistic evaluation

AbstractSilver–polypyrrole (PPy) core–shell nanoparticles have been fabricated by a facile one-step “green” synthesis using silver nitrate as an oxidant and soluble starch as an environmentally benign stabilizer and co-reducing agent. The morphology and optical properties of the particles were significantly affected by the reaction temperature, soluble starch concentration, and ratio of pyrrole monomer to AgNO3 oxidant. The core–shell nanoparticles exhibited outstanding dispersive properties in deionized water due to residual starch, as compared with PPy nanoparticles in which starch was absent. The mechanism of core–shell nanoparticle formation was elucidated through TEM imaging vs. reaction time. The colloidal and chemical stability of the nanoparticles was demonstrated in a variety of solvents, including acids, bases, and ionic and organic solvents, through monitoring the localized surface plasmon resonance of the nanoparticles. Furthermore, the catalytic properties of these silver–PPy core–shell nanoparticles were also demonstrated. FigureSchematic illustration of silver-PPy core-shell nanoparticle formation and methylene blue (MB) reduction using the core-shell nanoparticles as a catalyst.

Control of Molecular Ordering, Alignment, and Charge Transport in Solution-Processed Conjugated Polymer Thin Films

Morphology of conjugated polymers is a critical factor that significantly affects intrinsic charge transport characteristics and in turn performance of polymer-based devices. Morphological defects including misaligned crystalline grains and grain boundaries significantly impede efficient charge hopping between transport sites, resulting in degradation of device performance. Therefore, one important challenge is to control morphology of active polymer thin-films for achieving high performance flexible electronic devices. In the past decade, significant progress has been achieved in morphology control of conjugated polymer thin-films using solution-based processing techniques. This review focuses on recent advances in processing strategies that can tune the morphologies and thus impact charge transport properties of conjugated polymer thin films. Of the available processing strategies, polymer solution treatments and film deposition techniques will be mainly highlighted. The correlation between processing conditions, active layer morphologies, and device performance will be also be discussed.

Solvent Additive-Assisted Anisotropic Assembly and Enhanced Charge Transport of π-Conjugated Polymer Thin Films

Charge transport in π-conjugated polymer films involves π-π interactions within or between polymer chains. Here, we demonstrate a facile solution processing strategy that provides enhanced intra- and interchain π-π interactions of the resultant polymer films using a good solvent additive with low volatility. These increased interactions result in enhanced charge transport properties. The effect of the good solvent additive on the intra- and intermolecular interactions, morphologies, and charge transport properties of poly(3-hexylthiophene) (P3HT) films is systematically investigated. We found that the good solvent additive facilitates the self-assembly of P3HT chains into crystalline fibrillar nanostructures by extending the solvent drying time during thin-film formation. As compared to the prior approach using a nonsolvent additive with low volatility, the solvent blend system containing a good solvent additive results in enhanced charge transport in P3HT organic field-effect transistor (OFET) devices [from ca. 1.7 × 10-2 to ca. 8.2 × 10-2 cm2 V-1 s-1 for dichlorobenzene (DCB) versus 4.4 × 10-2 cm2 V-1 s-1 for acetonitrile]. The mobility appears to be maximized over a broad spectrum of additive concentrations (1-7 vol %), indicative of a wide processing window. Detailed analysis results regarding the charge injection and transport characteristics of the OFET devices reveal that a high-boiling-point solvent additive decreases both the contact resistance ( Rc) and channel resistance ( Rch), contributing to the mobility enhancement of the devices. Finally, the platform presented here is proven to be applicable to alternative good solvent additives with low volatility, such as chlorobenzene (CB) and trichlorobenzene (TCB). Specifically, the mobility enhancement of the resultant P3HT films increases in the order CB (bp 131 °C) < DCB (bp 180 °C) < TCB (bp 214 °C), suggesting that solvent additives with higher boiling points provide resultant films with preferable molecular ordering and morphologies for efficient charge transport.