Brian J. Riley

Single-mode low-loss chalcogenide glass waveguides for the mid-infrared

We demonstrate the design, fabrication, and characterization of single-mode low-loss waveguides for mid-infrared (MIR) wavelengths. Planar waveguide structures were fabricated from multilayer thin films of arsenic-based chalcogenide glasses followed by the creation of channel waveguides by using the photodarkening effect. Propagation losses as low as 0.5 dB/cm were measured for a quantum cascade laser end-fire coupled into the waveguides. This is a first step toward the design and fabrication of integrated optical components for MIR applications.

Chalcogen-Based Aerogels As Sorbents for Radionuclide Remediation

The efficient capture of radionuclides with long half-lives such as technetium-99 ((99)Tc), uranium-238 ((238)U), and iodine-129 ((129)I) is pivotal to prevent their transport into groundwater and/or release into the atmosphere. While different sorbents have been considered for capturing each of them, in the current work, nanostructured chalcogen-based aerogels called chalcogels are shown to be very effective at capturing ionic forms of (99)Tc and (238)U, as well as nonradioactive gaseous iodine (i.e., a surrogate for (129)I2), irrespective of the sorbent polarity. The chalcogel chemistries studied were Co0.7Bi0.3MoS4, Co0.7Cr0.3MoS4, Co0.5Ni0.5MoS4, PtGe2S5, and Sn2S3. The PtGe2S5 sorbent performed the best overall with capture efficiencies of 98.0% and 99.4% for (99)Tc and (238)U, respectively, and >99.0% for I2(g) over the duration of the experiment. The capture efficiencies for (99)Tc and (238)U varied between the different sorbents, ranging from 57.3-98.0% and 68.1-99.4%, respectively. All chalcogels showed >99.0% capture efficiency for iodine over the test duration. This versatile nature of chalcogels can provide an attractive option for the environmental remediation of the radionuclides associated with legacy wastes from nuclear weapons production as well as wastes generated during nuclear power production or nuclear fuel reprocessing.

Chalcogen -based aerogels as a multifunctional platform for remediation of radioactive iodine

Aerogels employing chalcogen-based (i.e., S, Se, and/or Te) structural units and interlinking metals are termed chalcogels and have many emerging applications. Here, chalcogels are discussed in the context of nuclear fuel reprocessing and radioactive waste remediation. Motivated by previous work on removal of heavy metals in aqueous solution, we explored the application of germanium sulfide chalcogels as a sorbent for gas-phase I2 based on Pearsons Hard/Soft Acid–Base (HSAB) principle. This work was driven by a significant need for high-efficiency sorbents for 129I, a long-lived isotope evolved during irradiated UO2 nuclear fuel reprocessing. These chalcogel compositions are shown to possess an affinity for iodine gas, I2(g), at various concentrations in air. This affinity is attributed to a strong chemical attraction between the chalcogen and I2(g), according to the HSAB principle. The high sorption efficiency is facilitated by the high porosity as well as the exceptionally large surface area of the chalcogels. This paper briefly discusses the current and alternative waste forms for 129I, elaborates on preliminary work to evaluate a Pt-Ge-S chalcogel as a I2(g) sorbent, and discusses the unknown chalcogel properties related to these materials in waste form.

Rhenium Solubility in Borosilicate Nuclear Waste Glass: Implications for the Processing and Immobilization of Technetium-99

The immobilization of technetium-99 ((99)Tc) in a suitable host matrix has proven to be a challenging task for researchers in the nuclear waste community around the world. In this context, the present work reports on the solubility and retention of rhenium, a nonradioactive surrogate for (99)Tc, in a sodium borosilicate glass. Glasses containing target Re concentrations from 0 to 10,000 ppm [by mass, added as KReO(4) (Re(7+))] were synthesized in vacuum-sealed quartz ampules to minimize the loss of Re from volatilization during melting at 1000 °C. The rhenium was found as Re(7+) in all of the glasses as observed by X-ray absorption near-edge structure. The solubility of Re in borosilicate glasses was determined to be ~3000 ppm (by mass) using inductively coupled plasma optical emission spectroscopy. At higher rhenium concentrations, additional rhenium was retained in the glasses as crystalline inclusions of alkali perrhenates detected with X-ray diffraction. Since (99)Tc concentrations in a glass waste form are predicted to be <10 ppm (by mass), these Re results implied that the solubility should not be a limiting factor in processing radioactive wastes, assuming Tc as Tc(7+) and similarities between Re(7+) and Tc(7+) behavior in this glass system.

Structural model of homogeneous As–S glasses derived from Raman spectroscopy and high-resolution XPS

The structure of homogeneous bulk As x S100− x (25 ≤ x ≤ 42) glasses, prepared by the conventional rocking–melting–quenching method, was investigated using high-resolution X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. It is shown that the main building blocks of their glass networks are regular AsS3/2 pyramids and sulfur chains. In the S-rich domain, the existence of quasi-tetrahedral (QT) S = As(S1/2)3 units is deduced from XPS data, but with a concentration not exceeding ∼3–5% of total atomic sites. Therefore, QT units do not appear as primary building blocks of the glass backbone in these materials, and an optimally-constrained network may not be an appropriate description for glasses when x < 40. It is shown that, in contrast to Se-based glasses, the ‘chain-crossing’ model is only partially applicable to sulfide glasses.

Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture

Powders of a Sn2S3 chalcogen-based aerogel (chalcogel) were combined with powdered polyacrylonitrile (PAN) in different mass ratios (SnS33, SnS50, and SnS70; # = mass% of chalcogel), dissolved in dimethyl sulfoxide, and added dropwise to deionized water to form pellets of a porous PAN-chalcogel hybrid material. These pellets, along with pure powdered (SnSp) and granular (SnSg) forms of the chalcogel, were then used to capture iodine gas under both dynamic (dilute) and static (concentrated) conditions. Both SnSp and SnSg chalcogels showed very high iodine loadings at 67.2 and 68.3 mass%, respectively. The SnS50 hybrid sorbent demonstrated a high, although slightly reduced, maximum iodine loading (53.5 mass%) with greatly improved mechanical rigidity. In all cases, X-ray diffraction results showed the formation of crystalline SnI4 and SnI4(S8)2, revealing that the iodine binding in these materials is mainly due to a chemisorption process, although a small amount of physisorption was observed.

Temperature Distribution within a Cold Cap during Nuclear Waste Vitrification

The kinetics of the feed-to-glass conversion affects the waste vitrification rate in an electric glass melter. The primary area of interest in this conversion process is the cold cap, a layer of reacting feed on top of the molten glass. The work presented here provides an experimental determination of the temperature distribution within the cold cap. Because direct measurement of the temperature field within the cold cap is impracticable, an indirect method was developed in which the textural features in a laboratory-made cold cap with a simulated high-level waste feed were mapped as a function of position using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. The temperature distribution within the cold cap was established by correlating microstructures of cold-cap regions with heat-treated feed samples of nearly identical structures at known temperatures. This temperature profile was compared with a mathematically simulated profile generated by a cold-cap model that has been developed to assess the rate of glass production in a melter.

Chalcogenide glasses and structures for quantum sensing

Chalcogenide glasses are formed by combining chalcogen elements with IV-V elements. Among the family of glasses, As2S3, and As2Se3 are important infrared (IR) transparent materials for a variety of applications such as IR sensors, waveguides, and photonic crystals. With the promise of accessibility to any wavelengths between 3.5 and 16 μm using tunable quantum cascade lasers (QCL) and chalcogenides with IR properties that can be compositionally adjusted, ultra-sensitive, solid-state, photonic-based chemical sensing in mid-wave IR region is now possible. Pacific Northwest National Laboratory (PNNL) has been developing quantum cascade lasers (QCLs), chalcogenides, and all other components for an integrated approach to chemical sensing. Significant progress has been made in glass formation and fabrication of different structures at PNNL. Three different glass-forming systems, As-S, As-S-Se, and As-S-Ag have been examined for this application. Purification of constituents from contaminants and thermal history are two major issues in obtaining defect-free glasses. We have shown how the optical properties can be systematically modified by changing the chemistry in As-S-Se system. Different fabrication techniques need to be employed for different geometries and structures. We have successfully fabricated periodic arrays and straight waveguides using laser-writing and characterized the structures. Wet-chemical lithography has been extended to chalcogenides and challenges identified. We have also demonstrated holographic recording or diffraction gratings in chalcogenides.

Investigation of Tc Migration Mechanism During Bulk Vitrification Process Using Re Surrogate

As a part of Bulk vitrification (BV) performance enhancement tasks, Laboratory scoping tests were performed in FY 2004-2005 to explore possible ways to reduce the amount of soluble Tc in the BV waste package. Theses scoping tests helped identify which mechanisms play an important role in the migration of Tc in the BV process (Hrma et al. 2005 and Kim et al. 2005). Based on the results from these scoping tests, additional tests were identified that will improve the understanding of Tc migration and to clearly identify the dominant mechanisms. The additional activities identified from previous studies were evaluated and prioritized for planning for Tasks 29 and 30 conducted in FY2006. Task 29 focused on the improved understanding of Tc migration mechanisms, and Task 30 focused on identifying the potential process changes that might reduce Tc/Re migration into the castable refractory block (CRB). This report summarizes the results from the laboratory- and crucible-scale tests in the lab for improved Tc migration mechanism understanding utilizing Re as a surrogate performed in Task 29.

Summary Report for the Development of Materials for Volatile Radionuclides

The materials development summarized here is in support of the Waste Forms campaign, Volatile Radionuclide task. Specifically, materials are being developed for the removal and immobilization of iodine and krypton, specifically 129I and 85Kr. During FY 2010, aerogel materials were investigated for removal and immobilization of 129I. Two aerogel formulations were investigated, one based on silica aerogels and the second on chalcogenides. For 85Kr, metal organic framework (MOF) structures were investigated.