Bryan S. Ringstrand

Electrochemical activity of glucose oxidase on a poly(ionic liquid)-Au nanoparticle composite.

Glucose oxidase (GOx) adsorbed on an ionic liquid-derived polymer containing internally organized columns of Au nanoparticles exhibits direct electron transfer and bioelectrocatalytic properties towards the oxidation of glucose. The cationic poly(ionic liquid) provides an ideal substrate for the electrostatic immobilization of GOx. The encapsulated Au nanoparticles serve to both promote the direct electron transfer with the recessed enzyme redox centers and impart electronic conduction to the composite, allowing it to function as an electrode for electrochemical detection.

Time resolved small angle X-ray scattering experiments performed on detonating explosives at the advanced photon source: Calculation of the time and distance between the detonation front and the x-ray beam

Time resolved Small Angle X-ray Scattering (SAXS) experiments on detonating explosives have been conducted at Argonne National Laboratorys Advanced Photon Source Dynamic Compression Sector. The purpose of the experiments is to measure the SAXS patterns at tens of ns to a few μs behind the detonation front. Corresponding positions behind the detonation front are of order 0.1–10 mm. From the scattering patterns, properties of the explosive products relative to the time behind the detonation front can be inferred. This report describes how the time and distance from the x-ray probe location to the detonation front is calculated, as well as the uncertainties and sources of uncertainty associated with the calculated times and distances.

Synthesis and Characterization of Quinuclidinium Derivatives of the [closo-1-CB11H12]− Anion as Potential Polar Components of Liquid Crystal Materials

Antipodal substitution of the [closo-1-CB11H12](-) anion with a 4-pentylquinuclidinium fragment and alkyl groups in positions C(1) and B(12) gave polar zwitterions 1[n] and 2[n]. The molecular structure of 1[5] was established using X-ray diffraction (XRD) methods: P1̅, a = 15.162(2) Å, b = 16.546(3) Å, c = 19.794(3) Å; α = 84.871(2)°, β = 84.057(2)°, γ = 84.058(3)°; Z = 8. All compounds exhibit high temperature in-plane ordered smectic phases that are stabilized by dipolar interactions. The ordered phases were investigated by powder XRD methods. Thermal and dielectric parameters for two derivatives, 1[0] and 1[6], were evaluated in nematic hosts, ClEster and BPhF. The dielectric data were analyzed with the Maier-Meier formalism augmented with density functional theory methods, and the results were compared to those for similar zwitterions previously reported.

Self-Assembly Directed Organization of Nanodiamond During Ionic Liquid Crystalline Polymer Formation.

The UV-initiated free radical polymerization of a lyotropic mesophase prepared by co-assembly of an aqueous mixture of an ionic liquid (IL) monomer, 3-decyl-1-vinylimidazolium chloride, in a dimethyl sulfoxide dispersion of an IL-monomer nanodiamond conjugate yields a well-ordered 2D hexagonally structured network-polymer composite. The IL monomer is covalently bound to carboxylated detonation diamond via ester-linked 3-decyl-1-vinylimidazolium bromide. Successful preparation of the amphiphile-functionalized nanodiamond is determined by ATR/FT-IR, thermogravimetric analysis, and small-angle X-ray scattering (SAXS). Mesophase and composite structure are evaluated by SAXS, revealing a columnar architecture composed of amphiphilic ionic liquid cylinders containing solvent-rich cores. Self-assembly directed site localization of the nanodiamond positions the particles in the alkyl chain continuum upon polymerization. The composite reversibly swells in ethanol allowing structural variation and modulation of the nanoparticle internal packing arrangement. This work demonstrates that through careful molecular design, self-organization and site-directed assembly of nanodiamond into chemically distinct regions of a nanostructured organogel can be achieved.

Structural evolution of detonation carbon in composition B by X-ray scattering

Products evolved during the detonation of high explosives are primarily a collection of molecular gases and solid carbon condensates. Electron microscopy studies have revealed that detonation carbon (soot) can contain a variety of unique carbon particles possessing novel morphologies, such as carbon onions and ribbons. Despite these observations very little is known about the conditions that leads to the production of these novel carbon nanoparticles. A fuller understanding on conditions that generate such nanoparticles would greatly benefit from time-resolved studies that probe particle formation and evolution through and beyond the chemical reaction zone. Herein, we report initial results employing time-resolved X-ray scattering (TRSAXS) measurements to monitor nanosecond time-scale carbon products formed from detonating Composition B (60% TNT, 40% RDX). These studies were performed at the Dynamic Compression Sector (DCS, Sector 35) at the Advanced Photon Source (Argonne National Laboratory). Analysis o...

Characterization of detonation soot produced during steady and overdriven conditions for three high explosive formulations

The detonation of high explosives (HE) produces a dense fluid of molecular gases and solid carbon. The solid detonation carbon contains various carbon allotropes such as detonation nanodiamonds, onion-like carbon, graphite and amorphous carbon, with the formation of the different forms dependent upon pressure, temperature and the environmental conditions of the detonation. We have collected solid carbon residues from controlled detonations of three HE formulations (Composition B-3, PBX 9501, and PBX 9502). Soot was collected from experiments designed to produce both steady and overdriven conditions, and from detonations in both an ambient (air) atmosphere and in an inert Ar atmosphere. Differences in solid carbon residues were quantified using X-ray photoelectron spectroscopy and carbon isotope measurements. Environmental conditions, HE formulation, and peak pressures influenced the amount of and isotopic composition of the carbon in the soot. Detonations in an Ar atmosphere produced greater amounts of ca...