Buddha Ratna Shrestha

Effect of interfacial ion structuring on range and magnitude of electric double layer, hydration, and adhesive interactions between mica surfaces in 0.05-3 M Li+ and Cs+ electrolyte solutions

Ions and water structuring at charged-solid/electrolyte interfaces and forces arising from interfacial structuring in solutions above 100 mM concentrations dominate structure and functionality in many physiological, geological, and technological systems. In these concentrations, electrolyte structuring occurs within the range of molecular dimensions. Here, we quantitatively measure and describe electric double layer (EDL) and adhesive interactions at mica-interfaces in aqueous CsCl and LiCl solutions with concentrations ranging from 50 mM to 3 M. Complementarily, using atomic force microscopy and surface forces apparatus experiments we characterize concentration-dependent stark differences in the inner and outer EDL force profiles, and discuss differences between the used methods. From 50 mM to 1 M concentrations, interactions forces measured in CsCl-solutions exhibit strong hydration repulsions, but no diffuse EDL-repulsions beyond the Stern layer. In confinement the weakly hydrated Cs(+) ions condensate into the mica-lattice screening the entire surface charge within the Stern layer. In contrast, strongly hydrated Li(+) ions only partially compensate the surface charge within the Stern layer, leading to the formation of a diffuse outer double layer with DLVO behavior. Both LiCl and CsCl solutions exhibit oscillatory ion-hydration forces at surface separations from 2.2 nm to 4-8 Å. Below 4-8 Å the force profiles are dominated in both cases by forces originating from water and/or ion confinement at the solid/electrolyte/solid interface. Adhesive minima and their location vary strongly with the electrolyte and its concentration due to specific ion correlations across the interface, while dispersion forces between the surfaces are overpowered. Highly concentrated 3 M solutions exhibit solidification of the inner EDL structure and an unexpected formation of additional diffuse EDL forces with an increasing range, as recently measured in ionic liquids. Our results may have important implications for understanding and modeling of interaction forces present in static and dynamic systems under physiological and high salt conditions.

Deciphering the scaling of single-molecule interactions using Jarzynski’s equality

Unravelling the complexity of the macroscopic world relies on understanding the scaling of single-molecule interactions towards integral macroscopic interactions. Here, we demonstrate the scaling of single acid-amine interactions through a synergistic experimental approach combining macroscopic surface forces apparatus experiments and single-molecule force spectroscopy. This experimental framework is ideal for testing the well-renowned Jarzynskis equality, which relates work performed under non-equilibrium conditions with equilibrium free energy. Macroscopic equilibrium measurements scale linearly with the number density of interfacial bonds, providing acid-amine interaction energies of 10.9 ± 0.2 kT. Irrespective of how far from equilibrium single-molecule experiments are performed, the Jarzynskis free energy converges to 11 ± 1 kT. Our results validate the applicability of Jarzynskis equality to unravel the scaling of non-equilibrium single-molecule experiments to scenarios where large numbers of molecules interacts simultaneously in equilibrium. The developed scaling strategy predicts large-scale properties such as adhesion or cell-cell interactions on the basis of single-molecule measurements.

Angstrom-resolved real-time dissection of electrochemically active noble metal interfaces

Electrochemical solid|liquid interfaces are critically important for technological applications and materials for energy storage, harvesting, and conversion. Yet, a real-time Angstrom-resolved visualization of dynamic processes at electrified solid|liquid interfaces has not been feasible. Here we report a unique real-time atomistic view into dynamic processes at electrochemically active metal interfaces using white light interferometry in an electrochemical surface forces apparatus. This method allows simultaneous deciphering of both sides of an electrochemical interface-the solution and the metal side-with microsecond resolution under dynamically evolving reactive conditions that are inherent to technological systems in operando. Quantitative in situ analysis of the potentiodynamic electrochemical oxidation/reduction of noble metal surfaces shows that Angstrom thick oxides formed on Au and Pt are high-ik materials; that is, they are metallic or highly defect-rich semiconductors, while Pd forms a low-ik oxide. In contrast, under potentiostatic growth conditions, all noble metal oxides exhibit a low-ik behavior. On the solution side, we reveal hitherto unknown strong electrochemical reaction forces, which are due to temporary charge imbalance in the electric double layer caused by depletion/generation of charged species. The real-time capability of our approach reveals significant time lags between electron transfer, oxide reduction/oxidation, and solution side reaction during a progressing electrode process. Comparing the kinetics of solution and metal side responses provides evidence that noble metal oxide reduction proceeds via a hydrogen adsorption and subsequent dissolution/redeposition mechanism. The presented approach may have important implications for designing emerging materials utilizing electrified interfaces and may apply to bioelectrochemical processes and signal transmission.

Wear Protection without Surface Modification Using a Synergistic Mixture of Molecular Brushes and Linear Polymers

We describe the design of lubricating and wear protecting fluids based on mixtures of bottle-brushes (BB) and linear polymer solutions. To illustrate this concept, we used hyaluronic acid (HA), a naturally occurring linear polyelectrolyte, and a water-soluble synthetic BB polymer. Individually, these two polymers exhibit poor wear protecting capabilities compared to that of saline solutions. Mixture of the two polymers in pure water or in saline allows the wear protection of surfaces over a wide range of shearing conditions to drastically increase. We demonstrate that this synergy between the BB and HA polymers emerges from a strong cohesion between the two components forming the boundary film due to entanglements between both polymers. We show that this concept can be applied to other types of linear polymers and surfaces and is independent of the chemical and mechanical properties of the surfaces.

Star-Shaped Crystallographic Cracking of Localized Nanoporous Defects

On self-assembled monolayer-covered Cu-Au substrates, localized volume shrinkage at initial dealloying sites leads to cracks within the attacked regions. It is started from well-controlled surface structures to gain fundamental insights in the driving mechanisms of localized corrosion and crack formation. Both the crack density and the crack morphology are critically dependent on surface orientation, crystallography, and inhibitor molecule species.

Localized dealloying corrosion mediated by self-assembled monolayers used as an inhibitor system

The structure and chemistry of thiol or selenol self-assembled organic monolayers have been frequently addressed due to the unique opportunities in functionalization of materials. Such organic films can also act as effective inhibition layers to mitigate oxidation or corrosion. Cu-Au alloy substrates covered by self-assembled monolayers show a different dealloying mechanism compared to bare surfaces. The organic surface layer inhibits dealloying of noble metal alloys by a suppression of surface diffusion at lower potentials but at higher applied potentials dealloying proceeds in localized regions due to passivity breakdown. We present an in situ atomic force microscopy study of a patterned thiol layer applied on Cu-Au alloy surfaces and further explore approaches to change the local composition of the surface layers by exchange of molecules. The pattern for the in situ experiment has been applied by micro-contact printing. This allows the study of corrosion protection with its dependence on different molecule densities at different sites. Low-density thiol areas surrounding the high-density patterns are completely protected and initiation of dealloying proceeds only along the areas with the lowest inhibitor concentration. Dealloying patterns are highly influenced and controlled by molecular thiol to selenol exchange and are also affected by introducing structural defects such as scratches or polishing defects.

Unraveling the Correlations between Conformation, Lubrication and Chemical Stability of Bottlebrush Polymers at Interfaces

In the present study, we monitored the conformation and chemical stability of a hydrophilic bottlebrush (BB) polymer in pure water and buffered saline solutions. We correlated these parameters to lubricating and wear protecting properties. Using the surface forces apparatus (SFA), we show that the BB polymer partially adsorbs on mica surfaces and extends half its contour length toward the aqueous media. This conformation gives rise to a strong repulsive interaction force when surfaces bearing BB polymer chains are pressed against each other. Analysis of these repulsive forces demonstrated that the adsorbed polymer chains could be described as end-attached elastic rods. After 2 months of aging at temperatures ranging from 4 to 37 °C, partial scission of the BB polymers lateral chains was observed by gel permeation chromatography with a half-life time of the polymer of at least two years. The thickness of the BB polymer layer assessed by SFA appeared to quickly decrease with aging time and temperature, which was mainly caused by the adsorption to the substrate of the released lateral chains. The gradual loss of the BB polymer lateral chains did not significantly impact the tribological properties of the BB polymer solution nor its wear protection capacity. The friction coefficient between mica surfaces immersed in the BB polymer solution was μ = 0.031 ± 0.002, was independent of the aging conditions, and remained constant up to an applied pressure P = 0.2 to 0.25 MPa. Altogether, this study demonstrates that, besides the gradual loss of lateral chains, the BB polymer is still able to perform adequately as a lubricant and wear protecting agent over a time period suitable for in vivo administration.

Adhesive barnacle peptides exhibit a steric-driven design rule to enhance adhesion between asymmetric surfaces

Barnacles exhibit superior underwater adhesion simply through sequencing of the 21 proteinogenic amino acids, without post processing or using special amino acids. Here, we measure and discuss the molecular interaction of two distinct and recurring short peptide sequences (Bp1 and Bp2) inspired from the surface binding 19kDa protein from the barnacle attachment interface. Using self-assembled monolayer (SAMs) of known physical and chemical properties on molecularly smooth gold substrates in 5mM NaCl at pH 7.3, (1) the adsorption mechanisms of the barnacle inspired peptides are explored using quartz crystal microbalance, and (2) adhesion mediating properties are measured using the surface force apparatus. The hydrophobic Bp1 peptide with a cysteine residue adsorbs irreversibly onto Au surfaces due to thiol bond formation, while on hydrophobic CH3 SAM surface, the interactions are hydrophobic in nature. Interestingly, Bp2 that contains both hydrophobic and protonated amine units exhibits asymmetric bridging with an exceptionally high adhesion energy up to 100mJ/m2 between mica and both gold and CH3 SAM. Surprisingly on hydrophilic surfaces such as COOH- or OH-SAMs both peptides fail to show any interactions, implying the necessity of surface charge to promote bridging. Our results provide insights into the molecular aspects of manipulating and utilizing barnacle-mediated peptides to promote or inhibit underwater adhesion.

Self‐Assembled Monolayers: Star‐Shaped Crystallographic Cracking of Localized Nanoporous Defects (Adv. Mater. 33/2015)

On page 4877, F. U. Renner, A. Bashir, M. Valtiner, and co-workers describe a star-like dealloying corrosion morphology that appears during the localized attack of smooth well-prepared Cu-Au surfaces. The surfaces are initially protected by thiol or selenol inhibitior films. Localized dealloying of Cu-Au produces nanoporous gold under stress and crystallographic cracks - thereby opening a new approach combining surface science with nanoscale mechanical testing.