Sangeetha Raman
Max Planck Society
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Sangeetha Raman.
Langmuir | 2014
Theodoros Baimpos; Buddha Ratna Shrestha; Sangeetha Raman; Markus Valtiner
Ions and water structuring at charged-solid/electrolyte interfaces and forces arising from interfacial structuring in solutions above 100 mM concentrations dominate structure and functionality in many physiological, geological, and technological systems. In these concentrations, electrolyte structuring occurs within the range of molecular dimensions. Here, we quantitatively measure and describe electric double layer (EDL) and adhesive interactions at mica-interfaces in aqueous CsCl and LiCl solutions with concentrations ranging from 50 mM to 3 M. Complementarily, using atomic force microscopy and surface forces apparatus experiments we characterize concentration-dependent stark differences in the inner and outer EDL force profiles, and discuss differences between the used methods. From 50 mM to 1 M concentrations, interactions forces measured in CsCl-solutions exhibit strong hydration repulsions, but no diffuse EDL-repulsions beyond the Stern layer. In confinement the weakly hydrated Cs(+) ions condensate into the mica-lattice screening the entire surface charge within the Stern layer. In contrast, strongly hydrated Li(+) ions only partially compensate the surface charge within the Stern layer, leading to the formation of a diffuse outer double layer with DLVO behavior. Both LiCl and CsCl solutions exhibit oscillatory ion-hydration forces at surface separations from 2.2 nm to 4-8 Å. Below 4-8 Å the force profiles are dominated in both cases by forces originating from water and/or ion confinement at the solid/electrolyte/solid interface. Adhesive minima and their location vary strongly with the electrolyte and its concentration due to specific ion correlations across the interface, while dispersion forces between the surfaces are overpowered. Highly concentrated 3 M solutions exhibit solidification of the inner EDL structure and an unexpected formation of additional diffuse EDL forces with an increasing range, as recently measured in ionic liquids. Our results may have important implications for understanding and modeling of interaction forces present in static and dynamic systems under physiological and high salt conditions.
Nature Communications | 2014
Sangeetha Raman; Thomas Utzig; Theodoros Baimpos; Buddha Ratna Shrestha; Markus Valtiner
Unravelling the complexity of the macroscopic world relies on understanding the scaling of single-molecule interactions towards integral macroscopic interactions. Here, we demonstrate the scaling of single acid-amine interactions through a synergistic experimental approach combining macroscopic surface forces apparatus experiments and single-molecule force spectroscopy. This experimental framework is ideal for testing the well-renowned Jarzynskis equality, which relates work performed under non-equilibrium conditions with equilibrium free energy. Macroscopic equilibrium measurements scale linearly with the number density of interfacial bonds, providing acid-amine interaction energies of 10.9 ± 0.2 kT. Irrespective of how far from equilibrium single-molecule experiments are performed, the Jarzynskis free energy converges to 11 ± 1 kT. Our results validate the applicability of Jarzynskis equality to unravel the scaling of non-equilibrium single-molecule experiments to scenarios where large numbers of molecules interacts simultaneously in equilibrium. The developed scaling strategy predicts large-scale properties such as adhesion or cell-cell interactions on the basis of single-molecule measurements.
Biofouling | 2011
Sangeetha Raman; Ravi Kumar
The barnacle exhibits a high degree of control over its attachment onto different types of solid surface. The structure and composition of barnacle cement have been reported previously, but mostly for barnacles growing on low surface energy materials. This article focuses on the strategies used by barnacles when they attach to engineering materials such as polymethylmethacrylate (PMMA), titanium (Ti) and stainless steel 316L (SS316L). Adhesion to these substrata is compared in terms of morphological structure, thickness and functional groups of the primary cement, the molting cycle and the nanomechanical properties of the cement. Structural characterization studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) in conjunction with nanomechanical characterization and infrared spectroscopy (FTIR) are used to understand the differences in the adhesion of primary barnacle cement to the different substrata. The results provide new insights into understanding the mechanisms at work across the barnacle–substratum interface.
ACS Nano | 2014
Kai Kristiansen; Philipp Stock; Theodoros Baimpos; Sangeetha Raman; Jaye K. Harada; Jacob N. Israelachvili; Markus Valtiner
Strong and particularly long ranged (>100 nm) interaction forces between apposing hydrophobic lipid monolayers are now well understood in terms of a partial turnover of mobile lipid patches, giving rise to a correlated long-range electrostatic attraction. Here we describe similarly strong long-ranged attractive forces between self-assembled monolayers of carboranethiols, with dipole moments aligned either parallel or perpendicular to the surface, and hydrophobic lipid monolayers deposited on mica. We compare the interaction forces measured at very different length scales using atomic force microscope and surface forces apparatus measurements. Both systems gave a long-ranged exponential attraction with a decay length of 2.0 ± 0.2 nm for dipole alignments perpendicular to the surface. The effect of dipole alignment parallel to the surface is larger than for perpendicular dipoles, likely due to greater lateral correlation of in-plane surface dipoles. The magnitudes and range of the measured interaction forces also depend on the surface area of the probe used: At extended surfaces, dipole alignment parallel to the surface leads to a stronger attraction due to electrostatic correlations of freely rotating surface dipoles and charge patches on the apposing surfaces. In contrast, perpendicular dipoles at extended surfaces, where molecular rotation cannot lead to large dipole correlations, do not depend on the scale of the probe used. Our results may be important to a range of scale-dependent interaction phenomena related to solvent/water structuring on dipolar and hydrophobic surfaces at interfaces.
ACS Nano | 2014
Buddha Ratna Shrestha; Theodoros Baimpos; Sangeetha Raman; Markus Valtiner
Electrochemical solid|liquid interfaces are critically important for technological applications and materials for energy storage, harvesting, and conversion. Yet, a real-time Angstrom-resolved visualization of dynamic processes at electrified solid|liquid interfaces has not been feasible. Here we report a unique real-time atomistic view into dynamic processes at electrochemically active metal interfaces using white light interferometry in an electrochemical surface forces apparatus. This method allows simultaneous deciphering of both sides of an electrochemical interface-the solution and the metal side-with microsecond resolution under dynamically evolving reactive conditions that are inherent to technological systems in operando. Quantitative in situ analysis of the potentiodynamic electrochemical oxidation/reduction of noble metal surfaces shows that Angstrom thick oxides formed on Au and Pt are high-ik materials; that is, they are metallic or highly defect-rich semiconductors, while Pd forms a low-ik oxide. In contrast, under potentiostatic growth conditions, all noble metal oxides exhibit a low-ik behavior. On the solution side, we reveal hitherto unknown strong electrochemical reaction forces, which are due to temporary charge imbalance in the electric double layer caused by depletion/generation of charged species. The real-time capability of our approach reveals significant time lags between electron transfer, oxide reduction/oxidation, and solution side reaction during a progressing electrode process. Comparing the kinetics of solution and metal side responses provides evidence that noble metal oxide reduction proceeds via a hydrogen adsorption and subsequent dissolution/redeposition mechanism. The presented approach may have important implications for designing emerging materials utilizing electrified interfaces and may apply to bioelectrochemical processes and signal transmission.
Journal of Structural Biology | 2011
Sangeetha Raman; Ravi Kumar
Barnacles are some of the major inhabitants of intertidal zones and have calcite-based exoskeleton to anchor and armor their tissues. Structural characterization studies of the specie Ambhibalanus reticulatus were performed to understand the construction of the exoskeleton which forms a light-weight yet stiff structure. The parietal shell is constructed of six compartments to yield a truncated cone geometry, which is neatly fixed onto the basal shell that attaches the organism to the substrate surface. The connections among the different compartments happen through sutured edges and also have chemical interlocking to make the junctions impermeable. Also, the shell parts are furnished with hollow channels reducing the overall mass of the construction. The structure and functions of different parts of the exoskeleton are identified and outlined. Finally, the mechanical properties such as modulus, hardness and fracture toughness of the exoskeleton obtained by indentation techniques are discussed.
Colloids and Surfaces B: Biointerfaces | 2017
Sangeetha Raman; Lukas Malms; Thomas Utzig; Buddha Ratna Shrestha; Philipp Stock; Shankar Krishnan; Markus Valtiner
Barnacles exhibit superior underwater adhesion simply through sequencing of the 21 proteinogenic amino acids, without post processing or using special amino acids. Here, we measure and discuss the molecular interaction of two distinct and recurring short peptide sequences (Bp1 and Bp2) inspired from the surface binding 19kDa protein from the barnacle attachment interface. Using self-assembled monolayer (SAMs) of known physical and chemical properties on molecularly smooth gold substrates in 5mM NaCl at pH 7.3, (1) the adsorption mechanisms of the barnacle inspired peptides are explored using quartz crystal microbalance, and (2) adhesion mediating properties are measured using the surface force apparatus. The hydrophobic Bp1 peptide with a cysteine residue adsorbs irreversibly onto Au surfaces due to thiol bond formation, while on hydrophobic CH3 SAM surface, the interactions are hydrophobic in nature. Interestingly, Bp2 that contains both hydrophobic and protonated amine units exhibits asymmetric bridging with an exceptionally high adhesion energy up to 100mJ/m2 between mica and both gold and CH3 SAM. Surprisingly on hydrophilic surfaces such as COOH- or OH-SAMs both peptides fail to show any interactions, implying the necessity of surface charge to promote bridging. Our results provide insights into the molecular aspects of manipulating and utilizing barnacle-mediated peptides to promote or inhibit underwater adhesion.
Langmuir | 2015
Thomas Utzig; Philipp Stock; Sangeetha Raman; Markus Valtiner
Polymer-mediated adhesion plays a major role for both technical glues and biological processes like self-assembly or biorecognition. In contrast to engineering systems, adhesive strength in biological systems is precisely tuned via well-adjusted arrangement of individual bonds. How adhesion may be engineered by arrangement of individual bonds is however not yet well-understood. Here we show how the number of bonds in series and parallel can significantly influence adhesion forces using specifically designed surface-bridging peptides. We directly measure how adhesion forces between -COOH and -NH2 functionalized surfaces across aqueous media vary as a function of the number of bonds in parallel. We also introduce surface bridging peptide sequences that are similarly end-functionalized with amines and carboxylic acid. Compared to single molecular junctions, adhesive strength mediated by these surface bridging peptides decreases by a factor of 2 for adhesive junctions that consist of two acid/base bonds in series. Furthermore, adhesive strength varies with the density of bonds in parallel. For dense systems, we observe that the formation of a bridging peptide monolayer is sterically hindered and therefore adhesion is further reduced significantly by 20%. Our results unravel how the arrangement of individual bonds in an adhesive junction allows for a wide tuning of adhesive strength on the basis of utilizing just one single specific bond. As such, for peptide adhesives it is essential to consider bonds in parallel in a wide range of applications where both high adhesion and triggered release of adhesive bonds is essential.
adhäsion KLEBEN & DICHTEN | 2015
Thomas Utzig; Philipp Stock; Sangeetha Raman; Markus Valtiner
Stabile industrielle Klebund Beschichtungstechnik erfordert ein delikates Zusammenspiel einer Vielzahl physikalischer und chemischer Prozesse. Auch wenn Formulierungstechnik heute auf einem großen Erfahrungsschatz beruht, werden die zugrundeliegenden molekularen Wechselwirkungen bisher kaum verstanden. Durch den rasenden Fortschritt in den nanoskalierten und molekularen Grundlagenwissenschaften ist es nun erstmals möglich, ein Konzept zu formulieren, welches mittelfristig auch ein molekulares Design von Klebstoffen und Haftung ermöglicht.
adhäsion KLEBEN & DICHTEN | 2015
Thomas Utzig; Philipp Stock; Sangeetha Raman; Markus Valtiner
Stabile industrielle Klebund Beschichtungstechnik erfordert ein delikates Zusammenspiel einer Vielzahl physikalischer und chemischer Prozesse. Auch wenn Formulierungstechnik heute auf einem großen Erfahrungsschatz beruht, werden die zugrundeliegenden molekularen Wechselwirkungen bisher kaum verstanden. Durch den rasenden Fortschritt in den nanoskalierten und molekularen Grundlagenwissenschaften ist es nun erstmals möglich, ein Konzept zu formulieren, welches mittelfristig auch ein molekulares Design von Klebstoffen und Haftung ermöglicht.