C.A. Ekdahl

Initial electron-beam results from the DARHT-II linear induction accelerator

The DARHT-II linear-induction accelerator has been successfully operated at 1.2-1.3 kA and 12.5-12.7 MeV to demonstrate the production and acceleration of an electron beam. Beam pulse lengths for these experiments were varied from 0.5 /spl mu/s to 1.2 /spl mu/s full-width half-maximum. A low-frequency inductance-capacitance (LC) oscillation of diode voltage and current resulted in an oscillation of the beam position through interaction with an accidental (static) magnetic dipole in the diode region. There was no growth in the amplitude of this oscillation after propagating more than 44 m through the accelerator, and there was no loss of beam current that could be measured. The results of these initial experiments are presented in this paper.

Status of the DARHT phase 2 long-pulse accelerator

The Dual-Axis Radiographic Hydrodynamics Test (DARHT) facility will employ two perpendicular electron linear induction accelerators to produce intense, bremsstrahlung X-ray pulses for flash radiography. We intend to produce measurements containing three-dimensional information with sub-millimeter spatial resolution of the interior features of very dense, explosively-driven objects. The facility will be completed in two phases with the first phase having become operational in July 1999 utilizing a single-pulse, 20-MeV, 2 -kA, 60-ns accelerator, a high-resolution electrooptical X-ray imaging system, and other hydrodynamics testing systems. The second phase will be operational in 2004 and features the addition of a 20-MeV, 2-kA, 2-microsecond accelerator. Four short electron micropulses of variable pulse-width and spacing will be chopped out of the original, long accelerator pulse for producing time-resolved X-ray images. The second phase also features an extended, high-resolution electro-optical X-ray system with a framing speed of 1.6-MHz. Production of the first beam from the Phase 2 injector will occur this year. In this paper we will present the overall design of the Phase 2 long-pulse injector and accelerator as well as some component test results. We will also discuss the downstream transport section that contains the fast kicker used to separate the long-pulse beam into short bursts suitable for radiography as well as the X-ray conversion target assembly. Selected experimental results from this area of the project will also be included. Finally, we will discuss our plans for initial operations.

Long-pulse beam stability experiments on the DARHT-II linear induction accelerator

When completed, the DARHT-II linear induction accelerator (LIA) will produce a 2-kA, 17-MeV electron beam in a 1600-ns flat-top pulse. In initial tests, DARHT-II accelerated beams with current pulse lengths from 500 to 1200 ns full-width at half-maximum (FWHM) with more than 1.2-kA, 12.5-MeV peak current and energy. Experiments have now been done with a /spl sim/1600-ns pulse length. These pulse lengths are all significantly longer than any other multimegaelectronvolt LIA, and they define a novel regime for high-current beam dynamics, especially with regard to beam stability. Although the initial tests demonstrated insignificant beam-breakup instability (BBU), the pulse length was too short to determine whether ion-hose instability would be present toward the end of a long, 1600-ns pulse. The 1600-ns pulse experiments reported here resolved these issues for the long-pulse DARHT-II LIA.

The Atlas project-a new pulsed power facility for high energy density physics experiments

Atlas is a facility being designed at Los Alamos National Laboratory (LANL) to perform high-energy-density experiments in support of weapon physics and basic research programs. It is designed to be an international user facility, providing experimental opportunities to researchers from national laboratories and academic institutions. For hydrodynamic experiments, it will be capable of achieving a pressure exceeding 30 Mbar in a several cubic centimeter volume. With the development of a suitable opening switch, it will be capable of producing more than 3 MJ of soft X-rays. The capacitor bank design consists of a 36 MJ array of 240 kV Marx modules. The system is designed to deliver a peak current of 45-50 MA with a 4-5-/spl mu/s rise time. The Marx modules are designed to be reconfigured to a 480-kV configuration for opening switch development. The capacitor bank is resistively damped to limit fault currents and capacitor voltage reversal. An experimental program for testing and certifying prototype components is currently under way. The capacitor bank design contains 300 closing switches. These switches are a modified version of a railgap switch originally designed for the DNA-ACE machines. Because of the large number of switches in the system, individual switch prefire rates must be less than 10/sup -4/ to protect the expensive target assemblies. Experiments are under way to determine if the switch-prefire probability can be reduced with rapid capacitor charging.

First beam at DARHT-II

The second axis of the Dual Axis Radiographic HydroTest (DARHT) facility will provide up to four short (< 150 ns) radiation pulses for flash radiography of high-explosive driven implosion experiments. To accomplish this the DARHT-II linear induction accelerator (LIA) will produce a 2-kA electron beam with 18-MeV kinetic energy, constant to within /spl plusmn/ 0.5% for 2-/spl mu/s. A fast kicker will cleave four short pulses out of the 2-/spl mu/s flattop, with the bulk of the beam diverted into a dump. The short pulses will then be transported to the final-focus magnet, and focused onto a tantalum target for conversion to bremsstrahlung pulses for radiography. DARHT-II is a collaborative effort between the Los Alamos, Lawrence Livermore, and Lawrence Berkeley National Laboratories of the University of California.

Status of the dual axis radiographic hydrodynamics test (DARHT) facility

The Dual-Axis Radiographic Hydrodynamics Test (DARHT) facility will employ two perpendicular electron Linear Induction Accelerators to produce intense, bremsstrahlung x-ray pulses for flash radiography. We intend to produce measurements containing three-dimensional information with sub-millimeter spatial resolution of the interior features of very dense, explosively-driven objects. The facility will be completed in two phases with the first phase having become operational in July 1999 utilizing a single-pulse, 20-MeV, 2-kA, 60-ns accelerator, a high-resolution electro-optical x-ray imaging system, and other hydrodynamics testing systems. We will briefly describe this machine. The first electron beams will be generated in the second phase of DARHT this year. The second DARHT accelerator consists of a 18.4-MeV, 2-kA, 2-microsecond pulse-width accelerator. Four short electron micropulses of variable pulse-width and spacing will be chopped out of the original, long accelerator pulse for producing time-resolved x-ray images. The second phase also features an extended, high-resolution electro-optical x-ray system with a framing speed of about 2-MHz. We will discuss this accelerator by summarizing the overall design of the long-pulse injector and accelerator. We will also discuss the fast kicker used to separate the long-pulse beam into short bursts suitable for radiography.

Rotational instability in a linear theta pinch

The m=1 ’’wobble’’ instability of the plasma column in a 5‐m linear theta pinch has been studied using an axial array of orthogonally viewing position detectors to resolve the wavelength and frequency of the column motion. The experimental results are compared with recent theoretical predictions that include finite Larmor orbit effects. The frequency and wavelength characteristics at saturation agree with the predicted dispersion relation for a plasma rotating faster than the diamagnetic drift speed. Measurements of the magnetic fields at the ends of the pinch establish the existence of currents flowing in such a way that they short out the radial electric fields in the plasma column. The magnitude of rotation, the observed delay in the onset of m=1 motion, and the magnitude of end‐shorting currents can all be understood in terms of the torsional Alfven waves that communicate to the central plasma column the information that the ends have been shorted. The same waves are responsible for the torque which r...

Collisionless flow and end loss from a high‐energy theta‐pinch plasma

End‐loss experiments on the high‐energy (Te+Ti=3.3 keV, ne=1.5×1016 cm−3) 5 m Scylla IV‐P theta pinch are reported. The evolution of the theta‐pinch plasma parameters in the presence of axial losses and the behavior of the exhausting plasma near the ends of the device have been investigated. The measured decay of the theta‐pinch plasma electron temperature agrees with code predictions based on classical axial thermal conduction losses. However, the axial ion heat flux is found to be unmeasurably small in the collisionless ion plasma. Energy‐line‐density measurements at the coil midplane also agree with code predictions and provide evidence of inward traveling rarefaction‐like waves. At the theta‐pinch ends, the exhausting plasma is comprised of a collimated plasma core which remains radially confined for tens of centimeters, strongly convects magnetic fields, and contains the bulk of the ejected plasma. This collimated core is surrounded by a plasma annulus that expands rapidly to the walls after leaving ...

HEL-1: a DEMG based demonstration of solid liner implosions at 100 MA

In August 1997, the Los Alamos National Laboratory (LANL) and the All-Russian Scientific Research Institute of Experimental Physics (VNIIEF) conducted a joint experiment in Sarov, Russia to demonstrate the feasibility of applying explosive pulsed power technology to implode large scale, high velocity cylindrical liners. Kilogram mass metal liners imploding at velocities of 5-25 km/sec are useful scientific tools for producing high energy density environments, ultra-high pressure shocks and for the rapid compression of plasmas. To explore the issues associated with the design, operation and diagnosis of such implosions, VNIIEF and LANL designed and executed a practical demonstration experiment in which a liner of approximately 1 kg mass was accelerated to 5-10 km/sec while undergoing a convergence of about 4:1. The scientific objectives of the experiment were three-fold: first to explore the limits of very large, explosive, pulse power systems delivering about 100 MA as drivers for accelerating solid density imploding liners to kinetic energies of 25 MJ or greater; second to evaluate the behavior of single material (aluminum) liners imploding at 5-10 km/s velocities by comparing experimental data with 1-D and 2 D numerical simulations; and third, to evaluate the condition of the selected liner at radial convergence of 4 and a final radius of 6 cm. A liner of such parameters could be used as a driver for the equation of state measurements at megabar pressures or as a driver for a future experiment in which a magnetized fusion plasma would be compressed to approach ignition conditions.

Results of a 100-megaampere liner implosion experiment

A very high-current liner implosion experiment was conducted, using an explosive magnetic-compression generator (EMG) to deliver a peak current of 102 /spl plusmn/ 3 MA, to implode a 4.0-mm-thick aluminum liner. Analysis of experimental data showed that the inner surface of the liner had attained a velocity of between 6.8-8.4 km/s, consistent with detailed numerical calculations. Both calculations and data were consistent with a final liner state that was still substantially solid at target impact time and had a total kinetic energy of over 20 MJ.