C. Pitsalidis

Effects of buffer layer properties and annealing process on bulk heterojunction morphology and organic solar cell performance

The performance of polymer–fullerene bulk heterojunction (BHJ) solar cells is strongly dependent on the vertical distribution of the donor and acceptor regions within the BHJ layer. In this work, we investigate in detail the effect of the hole transport layer (HTL) physical properties and the thermal annealing on the BHJ morphology and the solar cell performance. For this purpose, we have prepared solar cells with four distinct formulations of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) buffer layers. The samples were subjected to thermal annealing, applied either before (pre-annealing) or after (post-annealing) the cathode metal deposition. The effect of the HTL and the annealing process on the BHJ ingredient distribution – namely, poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) – has been studied by spectroscopic ellipsometry and atomic force microscopy. The results revealed P3HT segregation at the top region of the films, which had a detrimental effect on all pre-annealed devices, whereas PCBM was found to accumulate at the bottom interface. This demixing process depends on the PEDOT:PSS surface energy; the more hydrophilic the surface the more profound is the vertical phase separation within the BHJ. At the same time those samples suffer from high recombination losses as evident from the analysis of the J–V measurements obtained in the dark. Our results underline the significant effect of the HTL–active and active–ETL (electron transport layer) interfacial composition that should be taken into account during the optimization of all polymer–fullerene solar cells.

Oxygen-plasma-modified biomimetic nanofibrous scaffolds for enhanced compatibility of cardiovascular implants

Summary Electrospun nanofibrous scaffolds have been extensively used in several biomedical applications for tissue engineering due to their morphological resemblance to the extracellular matrix (ECM). Especially, there is a need for the cardiovascular implants to exhibit a nanostructured surface that mimics the native endothelium in order to promote endothelialization and to reduce the complications of thrombosis and implant failure. Thus, we herein fabricated poly-ε-caprolactone (PCL) electrospun nanofibrous scaffolds, to serve as coatings for cardiovascular implants and guide tissue regeneration. Oxygen plasma treatment was applied in order to modify the surface chemistry of the scaffold and its effect on cell attachment and growth was evaluated. The conditions of the surface modification were properly adjusted in order to define those conditions of the treatment that result in surfaces favorable for cell growth, while maintaining morphological integrity and mechanical behavior. Goniometry (contact angle measurements), scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) measurements were used to evaluate the morphological and chemical changes induced by the plasma treatment. Moreover, depth-sensing nanoindentation was performed to study the resistance of the plasma-treated scaffolds to plastic deformation. Lastly, the cell studies indicated that all scaffolds were cytocompatible, with the plasma-treated ones expressing a more pronounced cell viability and adhesion. All the above findings demonstrate the great potential of these biomimetic tissue-engineering constructs as efficient coatings for enhanced compatibility of cardiovascular implants.

High performance transistors based on the controlled growth of triisopropylsilylethynyl-pentacene crystals via non-isotropic solvent evaporation

Triisopropylsilylethynyl-pentacene (TIPS-PEN) has proven to be one of the most promising small molecules in the field of molecular electronics, due to its unique features in terms of stability, performance and ease of processing. Among a wide variety of well-established techniques for the deposition of TIPS-PEN, blade-metered methods have recently gained great interest towards the formation of uniform crystalline films over a large area. Following this rationale, we herein designed a versatile approach based on blade-coating, which overcomes the problem of anisotropic crystal formation by manipulating the solvent evaporation behaviour, in a way that brings about a preferential degree of crystal orientation. The applicability of this method was evaluated by fabricating field-effect transistors on glass as well as on silicon dioxide/silicon (SiO2/Si) substrates. Interestingly, in an attempt to improve the rheological and wetting behaviour of the liquid films on the SiO2/Si substrates, we introduced a polymeric interlayer of polystyrene (PS) or polymethylmethacrylate (PMMA) which concurrently acts as passivation and crystallization assisting layer. In this case, the synergistic effects of the highly-ordered crystalline structure and the oxide surface modification were thoroughly investigated. The overall performance of the fabricated devices revealed excellent electrical characteristics, with high saturation mobilities up to 0.72 cm2 V−1 s−1 (on glass with polymeric dielectric), on/off current ratio >104 and low threshold voltage values (<−5 V).

Electrospray-Processed Soluble Acenes toward the Realization of High-Performance Field-Effect Transistors

Functionalized acenes have proven to be promising compounds in the field of molecular electronics because of their unique features in terms of the stability, performance, and ease of processing. The emerging concept of large-area-compatible techniques for flexible electronics has brought about a wide variety of well-established techniques for the deposition of soluble acenes, with spray-coating representing an especially fruitful approach. In the present study, electrostatic spray deposition is proposed as an alternative to the conventional spray-coating processes, toward the realization of high-performance organic field-effect transistors (OFETs), on both rigid and flexible substrates. Particularly, a thorough study on the effect of the solvent and spraying regime on the resulting crystalline films morphology is performed. By optimization of the process conditions in terms of control over the size as well as the crystallization scheme of the droplets, desirable morphological features along with high-quality crystal domains are obtained. The fabricated OFETs exhibit excellent electrical characteristics, with high field-effect mobility up to 0.78 cm(2)/(V s), I(on)/I(off) >10(4), and near-zero threshold voltages. Additionally, the good performance of the OFETs realized on plastic substrates gives great potentiality to the proposed method for applications in the challenging field of large-area electronics.

Conducting Polymer Scaffolds for Hosting and Monitoring 3D Cell Culture

This work reports the design of a live‐cell monitoring platform based on a macroporous scaffold of a conducting polymer, poly(3,4‐ethylene dioxythiophene):poly(styrenesulfonate). The conducting polymer scaffolds support 3D cell cultures due to their biocompatibility and tissue‐like elasticity, which can be manipulated by inclusion of biopolymers such as collagen. Integration of a media perfusion tube inside the scaffold enables homogenous cell spreading and fluid transport throughout the scaffold, ensuring long term cell viability. This also allows for co‐culture of multiple cell types inside the scaffold. The inclusion of cells within the porous architecture affects the impedance of the electrically conducting polymer network and, thus, is utilized as an in situ tool to monitor cell growth. Therefore, while being an integral part of the 3D tissue, the conducting polymer is an active component, enhancing the tissue function, and forming the basis for a bioelectronic device with integrated sensing capability.

Polyelectrolyte Layer-by-Layer Assembly on Organic Electrochemical Transistors

Oppositely charged polyelectrolyte multilayers (PEMs) were built up in a layer-by-layer (LbL) assembly on top of the conducting polymer channel of an organic electrochemical transistor (OECT), aiming to combine the advantages of well-established PEMs with a high performance electronic transducer. The multilayered film is a model system to investigate the impact of biofunctionalization on the operation of OECTs comprising a poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) film as the electrically active layer. Understanding the mechanism of ion injection into the channel that is in direct contact with charged polymer films provides useful insights for novel biosensing applications such as nucleic acid sensing. Moreover, LbL is demonstrated to be a versatile electrode modification tool enabling tailored surface features in terms of thickness, softness, roughness, and charge. LbL assemblies built up on top of conducting polymers will aid the design of new bioelectronic platforms for drug delivery, tissue engineering, and medical diagnostics.

Neurospheres on Patterned PEDOT:PSS Microelectrode Arrays Enhance Electrophysiology Recordings

Microelectrode arrays (MEAs) are a versatile diagnostic tool to study neural networks. Culture of primary neurons on these platforms allows for extracellular recordings of action potentials. Despite many advances made in the technology to improve such recordings, the recording yield on MEAs remains sparse. Here, enhanced recording yield is shown induced by varying cell densities on poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)‐coated MEAs. It is demonstrated that high cell densities (900 cells mm−2) of primary cortical cells increase the number of recording electrodes by 53.1% ± 11.3%, compared with low cell densities (500 cells mm−2) with 6.3% ± 1.4%. To further improve performance, 3D clusters known as neurospheres are cultured on the MEAs, significantly increasing single unit activity recordings. Extensive spike sorting is performed to analyze the unit activity recording multiple neurons with a single microelectrode. Finally, patterning of polyethylene glycol diacrylate through laser ablation is demonstrated, as a means to more precisely confine neurospheres on top of the electrodes. The possibility of recording single neurons with multiple neighboring electrodes is shown. Overall, a total recording yield of 21.4% is achieved, with more than 90% obtained from electrodes with neurospheres, maximizing the functionality of these planar MEAs as effective tools to study pharmacology‐based effects on neural networks.

Organic transistors based on airbrushed small molecule-insulating polymer blends with mobilities exceeding 1 cm2 V−1 s−1

Spray-coating, has recently fueled scientific interest as a versatile solution-processing technique for the realization of organic electronic devices, such as organic field-effect transistors (OFETs). In the present work, air-brush method was used for the deposition of semiconducting blends of triisopropylsilylethynyl-pentacene (TIPS-PEN) and common insulating polymers of polystyrene or polymethylmethacrylate. The use of such blend systems not only resulted in an improved wet film formation but also enabled efficient control over the crystallization process. A systematic study on the effect of different composition ratio on the morphology and crystallinity of the sprayed films as well as their macroscopic uniformity, was carried out. Both blend systems revealed well-ordered TIPS-PEN crystalline domains on the top surface, indicative of the pronounced phase separation phenomena. The optimized airbrushed OFETs exhibited excellent electrical characteristics with a maximum hole mobility value of 1.3 cm2 V−1 s−1, negligible hysteresis, near-zero turn-on voltages and on/off current ratio greater than 105. Additionally, the transistors revealed good long-term environmental stability, with no significant degradation after a period of 13 months. These results represent an important step for present and future applications of spaying techniques toward the controlled growth of high performance and environmentally stable OFETs.

Biomimetic Electronic Devices for Measuring Bacterial Membrane Disruption

Antibiotic discovery has experienced a severe slowdown in terms of discovery of new candidates. In vitro screening methods using phospholipids to model the bacterial membrane provide a route to identify molecules that specifically disrupt bacterial membranes causing cell death. Thanks to the electrically insulating properties of the major component of the cell membrane, phospholipids, electronic devices are highly suitable transducers of membrane disruption. The organic electrochemical transistor (OECT) is a highly sensitive ion-to-electron converter. Here, the OECT is used as a transducer of the permeability of a lipid monolayer (ML) at a liquid:liquid interface, designed to read out changes in ion flux caused by compounds that interact with, and disrupt, lipid assembly. This concept is illustrated using the well-documented antibiotic Polymixin B and the highly sensitive quantitation of permeability of the lipid ML induced by two novel recently described antibacterial amine-based oligothioetheramides is shown, highlighting molecular scale differences in their disruption capabilities. It is anticipated that this platform has the potential to play a role in front-line antimicrobial compound design and characterization thanks to the compatibility of semiconductor microfabrication technology with high-throughput readouts.

Conducting Polymer Scaffolds Based on Poly(3,4-ethylenedioxythiophene) and Xanthan Gum for Live-Cell Monitoring

Conducting polymer scaffolds can promote cell growth by electrical stimulation, which is advantageous for some specific type of cells such as neurons, muscle, or cardiac cells. As an additional feature, the measure of their impedance has been demonstrated as a tool to monitor cell growth within the scaffold. In this work, we present innovative conducting polymer porous scaffolds based on poly(3,4-ethylenedioxythiophene) (PEDOT):xanthan gum instead of the well-known PEDOT:polystyrene sulfonate scaffolds. These novel scaffolds combine the conductivity of PEDOT and the mechanical support and biocompatibility provided by a polysaccharide, xanthan gum. For this purpose, first, the oxidative chemical polymerization of 3,4-ethylenedioxythiophene was carried out in the presence of polysaccharides leading to stable PEDOT:xanthan gum aqueous dispersions. Then, by a simple freeze-drying process, porous scaffolds were prepared from these dispersions. Our results indicated that the porosity of the scaffolds and mechanical properties are tuned by the solid content and formulation of the initial PEDOT:polysaccharide dispersion. Scaffolds showed interconnected pore structure with tunable sizes ranging between 10 and 150 μm and Young’s moduli between 10 and 45 kPa. These scaffolds successfully support three-dimensional cell cultures of MDCK II eGFP and MDCK II LifeAct epithelial cells, achieving good cell attachment with very high degree of pore coverage. Interestingly, by measuring the impedance of the synthesized PEDOT scaffolds, the growth of the cells could be monitored.