Carlos Poblete-Echeverría

Estimating Evapotranspiration of an Apple Orchard Using a Remote Sensing-Based Soil Water Balance

The main goal of this research was to estimate the actual evapotranspiration (ETc) of a drip-irrigated apple orchard located in the semi-arid region of Talca Valley (Chile) using a remote sensing-based soil water balance model. The methodology to estimate ETc is a modified version of the Food and Agriculture Organization of the United Nations (FAO) dual crop coefficient approach, in which the basal crop coefficient (Kcb) was derived from the soil adjusted vegetation index (SAVI) calculated from satellite images and incorporated into a daily soil water balance in the root zone. A linear relationship between the Kcb and SAVI was developed for the apple orchard Kcb = 1.82·SAVI − 0.07 (R2 = 0.95). The methodology was applied during two growing seasons (2010–2011 and 2012–2013), and ETc was evaluated using latent heat fluxes (LE) from an eddy covariance system. The results indicate that the remote sensing-based soil water balance estimated ETc reasonably well over two growing seasons. The root mean square error (RMSE) between the measured and simulated ETc values during 2010–2011 and 2012–2013 were, respectively, 0.78 and 0.74 mm·day−1, which mean a relative error of 25%. The index of agreement (d) values were, respectively, 0.73 and 0.90. In addition, the weekly ETc showed better agreement. The proposed methodology could be considered as a useful tool for scheduling irrigation and driving the estimation of water requirements over large areas for apple orchards.

Digital Cover Photography for Estimating Leaf Area Index (LAI) in Apple Trees Using a Variable Light Extinction Coefficient

Leaf area index (LAI) is one of the key biophysical variables required for crop modeling. Direct LAI measurements are time consuming and difficult to obtain for experimental and commercial fruit orchards. Devices used to estimate LAI have shown considerable errors when compared to ground-truth or destructive measurements, requiring tedious site-specific calibrations. The objective of this study was to test the performance of a modified digital cover photography method to estimate LAI in apple trees using conventional digital photography and instantaneous measurements of incident radiation (Io) and transmitted radiation (I) through the canopy. Leaf area of 40 single apple trees were measured destructively to obtain real leaf area index (LAID), which was compared with LAI estimated by the proposed digital photography method (LAIM). Results showed that the LAIM was able to estimate LAID with an error of 25% using a constant light extinction coefficient (k = 0.68). However, when k was estimated using an exponential function based on the fraction of foliage cover (ff) derived from images, the error was reduced to 18%. Furthermore, when measurements of light intercepted by the canopy (Ic) were used as a proxy value for k, the method presented an error of only 9%. These results have shown that by using a proxy k value, estimated by Ic, helped to increase accuracy of LAI estimates using digital cover images for apple trees with different canopy sizes and under field conditions.

Selecting Canopy Zones and Thresholding Approaches to Assess Grapevine Water Status by Using Aerial and Ground-Based Thermal Imaging

Aerial and terrestrial thermography has become a practical tool to determine water stress conditions in vineyards. However, for proper use of this technique it is necessary to consider vine architecture (canopy zone analysis) and image thresholding approaches (determination of the upper and lower baseline temperature values). During the 2014–2015 growing season, an experimental study under different water conditions (slight, mild, moderate, and severe water stress) was carried out in a commercial vineyard (Vitis vinifera L., cv. Carmene). In this study thermal images were obtained from different canopy zones by using both aerial (>60 m height) and ground-based (sunlit, shadow and nadir views) thermography. Using customized code that was written specifically for this research, three different thresholding approaches were applied to each image: (i) the standard deviation technique (SDT); (ii) the energy balance technique (EBT); and (iii) the field reference temperature technique (FRT). Results obtained from three different approaches showed that the EBT had the best performance. The EBT was able to discriminate over 95% of the leaf material, while SDT and FRT were able to detect around 70% and 40% of the leaf material, respectively. In the case of canopy zone analysis, ground-based nadir images presented the best correlations with stomatal conductance (gs) and stem water potential (Ψstem), reaching determination coefficients (r2) of 0.73 and 0.82, respectively. The best relationships between thermal indices and plant-based variables were registered during the period of maximum atmospheric demand (near veraison) with significant correlations for all methods.

Detection and Segmentation of Vine Canopy in Ultra-High Spatial Resolution RGB Imagery Obtained from Unmanned Aerial Vehicle (UAV): A Case Study in a Commercial Vineyard

The use of Unmanned Aerial Vehicles (UAVs) in viticulture permits the capture of aerial Red-Green-Blue (RGB) images with an ultra-high spatial resolution. Recent studies have demonstrated that RGB images can be used to monitor spatial variability of vine biophysical parameters. However, for estimating these parameters, accurate and automated segmentation methods are required to extract relevant information from RGB images. Manual segmentation of aerial images is a laborious and time-consuming process. Traditional classification methods have shown satisfactory results in the segmentation of RGB images for diverse applications and surfaces, however, in the case of commercial vineyards, it is necessary to consider some particularities inherent to canopy size in the vertical trellis systems (VSP) such as shadow effect and different soil conditions in inter-rows (mixed information of soil and weeds). Therefore, the objective of this study was to compare the performance of four classification methods (K-means, Artificial Neural Networks (ANN), Random Forest (RForest) and Spectral Indices (SI)) to detect canopy in a vineyard trained on VSP. Six flights were carried out from post-flowering to harvest in a commercial vineyard cv. Carmenere using a low-cost UAV equipped with a conventional RGB camera. The results show that the ANN and the simple SI method complemented with the Otsu method for thresholding presented the best performance for the detection of the vine canopy with high overall accuracy values for all study days. Spectral indices presented the best performance in the detection of Plant class (Vine canopy) with an overall accuracy of around 0.99. However, considering the performance pixel by pixel, the Spectral indices are not able to discriminate between Soil and Shadow class. The best performance in the classification of three classes (Plant, Soil, and Shadow) of vineyard RGB images, was obtained when the SI values were used as input data in trained methods (ANN and RForest), reaching overall accuracy values around 0.98 with high sensitivity values for the three classes.

Spectral Knowledge (SK-UTALCA): Software for Exploratory Analysis of High-Resolution Spectral Reflectance Data on Plant Breeding

This article describes public, free software that provides efficient exploratory analysis of high-resolution spectral reflectance data. Spectral reflectance data can suffer from problems such as poor signal to noise ratios in various wavebands or invalid measurements due to changes in incoming solar radiation or operator fatigue leading to poor orientation of sensors. Thus, exploratory data analysis is essential to identify appropriate data for further analyses. This software overcomes the problem that analysis tools such as Excel are cumbersome to use for the high number of wavelengths and samples typically acquired in these studies. The software, Spectral Knowledge (SK-UTALCA), was initially developed for plant breeding, but it is also suitable for other studies such as precision agriculture, crop protection, ecophysiology plant nutrition, and soil fertility. Various spectral reflectance indices (SRIs) are often used to relate crop characteristics to spectral data and the software is loaded with 255 SRIs which can be applied quickly to the data. This article describes the architecture and functions of SK-UTALCA and the features of the data that led to the development of each of its modules.

Calibration and validation of an aerodynamic method to estimate the spatial variability of sensible and latent heat fluxes over a drip-irrigated Merlot vineyard

ABSTRACT A study was carried out to calibrate and validate the aerodynamic temperature method for estimating the spatial variability of the sensible (H) and latent (LE) heat fluxes over a drip-irrigated merlot vineyard located in the Maule Region, in Chile. For this study, measurement of energy balance components and meteorological data were collected from the 2006 to 2010 growing seasons. The experimental plot was composed of a 4.25 ha of ‘Merlot’ vineyard, which was equipped with an Eddy-Covariance system and an automatic weather station. The k-fold cross-validation method was utilized to tune and validate a vineyard surface aerodynamic temperature (Taero) model, considering all of the days when Landsat scenes and ground measurements of meteorological data and surface energy balance (SEB) were available. Then, the satellite-based estimations of Taero were utilized to calculate the surface aerodynamic resistance (rah) and, subsequently, heat fluxes of H and LE. Results indicated that the estimated H and rah values were not significantly different to those measured in the vineyard (95% significance level) showing a root mean square (RMSE) and mean absolute error (MAE) between 34–29 W m−2 and 1.01–0.78 s m−1, respectively. Satellite-based computations of LE were somewhat higher than those measured at the time of satellite overpass (RMSE = 63 W m−2; MAE = 56 W m−2), presumably due to the biases embedded in the net radiation (Rn) and soil heat flux (G) computations. The proposed SEB method based on Taero is very simple to implement, presenting similar accuracies on ET mapping to those computed by complex satellite-based models.

EFFECTS OF THREE IRRIGATION STRATEGIES ON GAS EXCHANGE RELATIONSHIPS, PLANT WATER STATUS, YIELD COMPONENTS AND WATER PRODUCTIVITY ON GRAFTED CARMÉNÈRE GRAPEVINES

In the Chilean viticultural industry, Carménère is considered an emblematic cultivar that is cultivated mainly in arid and semi-arid zones. For this reason, it is necessary to use precise irrigation scheduling for improving water use efficiency (WUE), water productivity (WP), yield and wine quality. This study evaluated the effects of three deficit irrigation strategies on gas exchange variables, WUE, WP and yield components in a drip-irrigated Carménère vineyard growing under semi-arid climatic conditions during two consecutive seasons (2011/12 and 2012/13). The irrigation strategies were applied in completely randomized design from fruit set (S) to harvest (H). The first irrigation strategy (T1) involved continuous irrigation at 100% of actual evapotranspiration (ETa) from S to the veraison (V) period and at 80% of ETa from V to H. The second irrigation strategy (T2) involved irrigation at 50% of ETa from S to H and the third one (T3) involved no-irrigation from S to V and at 30% of ETa from V to H. The results indicated that there was a significant non-linear correlation between net CO2 assimilation (AN) and stomatal conductance (gs), which resulted in three zones of water stress (zone I = gs > 0.30 mol H2O m-2s-1; zone II = between 0.06 and 0.30 mol H2O m-2s-1; and zone III = gs < 0.06 mol H2O m-2s-1). The use of less water by T2 and T3 had a significant effect on yield components, with a reduction in the weight and diameter of grapes. A significant increase in WP (7.3 kg m-3) occurred in T3, which resulted in values of WUE that were significantly higher than those from T1 and T2. Also, a significant non-linear relationship between the integral water stress (SIΨ) and WP (R2 = 0.74) was established. The results show that grafted Carménère vines were tolerant to water stress although differences between cultivars/genotypes still need to be evaluated.

Inference of foliar temperature profile of a vineyard using integrated sensors into a motorized vehicle

Inferring foliar temperatures is motivated by the high cost related to measure each plants temperatures in a vineyard. Foliar temperature is correlated with the plants water potential, which allows farmers to take irrigation decisions. In order to deal with this situation, we utilized information obtained from several temperature infrared sensors integrated into a motor vehicle that runs a vineyard taking measurements at different heights. This data was interpolated with Kriging and IDW methods. These models were evaluated through RMSE (rootmean-square error) and rRMSE (relative root-mean-square error) as performance measures. Main results indicate that the Krigning approach presents a better performance in comparison with IDW. It is possible to see that the sensors located at lower altitudes show less measured error as RMSE. It was also observed that the spatial distribution of errors is homogeneous, with most of these errors less than or equal to the average RMSE. Finally, no significant changes are observed in the model performance when halving the data employed for interpolation. From these assessments, optimum operation conditions for the monitoring equipment were proposed.