Caroline Trevisan Weber

Removal of hazardous pharmaceutical dyes by adsorption onto papaya seeds

Papaya (Carica papaya L.) seeds were used as adsorbent to remove toxic pharmaceutical dyes (tartrazine and amaranth) from aqueous solutions, in order to extend application range. The effects of pH, initial dye concentration, contact time and temperature were investigated. The kinetic data were evaluated by the pseudo first-order, pseudo second-order and Elovich models. The equilibrium was evaluated by the Langmuir, Freundlich and Temkin isotherm models. It was found that adsorption favored a pH of 2.5, temperature of 298 K and equilibrium was attained at 180-200 min. The adsorption kinetics followed the pseudo second-order model, and the equilibrium was well represented by the Langmuir model. The maximum adsorption capacities were 51.0 and 37.4 mg g(-1) for tartrazine and amaranth, respectively. These results revealed that papaya seeds can be used as an alternative adsorbent to remove pharmaceutical dyes from aqueous solutions.

Carbon Nanotubes as Supports for Inulinase Immobilization

The commercial inulinase obtained from Aspergillus niger was non-covalently immobilized on multiwalled carbon nanotubes (MWNT-COOH). The immobilization conditions for the carbon nanotubes were defined by the central composite rotational design (CCRD). The effects of enzyme concentration (0.8%–1.7% v/v) and adsorbent:adsorbate ratio (1:460–1:175) on the enzyme immobilization were studied. The adsorbent:adsorbate ratio variable has positive effect and the enzyme concentration has a negative effect on the inulinase immobilization (U/g) response at the 90% significance level. These results show that the lower the enzyme concentration and the higher the adsorbent:adsorbate ratio, better is the immobilization. According to the results, it is possible to observe that the carbon nanotubes present an effective inulinase adsorption. Fast adsorption in about six minutes and a loading capacity of 51,047 U/g support using a 1.3% (v/v) inulinase concentration and a 1:460 adsorbent:adsorbate ratio was observed. The effects of temperature on the immobilized enzyme activity were evaluated, showing better activity at 50 °C. The immobilized enzyme maintained 100% of its activity during five weeks at room temperature. The immobilization strategy with MWNT-COOH was defined by the experimental design, showing that inulinase immobilization is a promising biotechnological application of carbon nanotubes.

Adsorption of leather dye onto activated carbon prepared from bottle gourd: equilibrium, kinetic and mechanism studies

Activated carbon prepared from bottle gourd has been used as adsorbent for removal of leather dye (Direct Black 38) from aqueous solution. The activated carbon obtained showed a mesoporous texture, with surface area of 556.16 m(2) g(-1), and a surface free of organic functional groups. The initial dye concentration, contact time and pH significantly influenced the adsorption capacity. In the acid region (pH 2.5) the adsorption of dye was more favorable. The adsorption equilibrium was attained after 60 min. Equilibrium data were analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherm models. The equilibrium data were best described by the Langmuir isotherm, with maximum adsorption capacity of 94.9 mg g(-1). Adsorption kinetic data were fitted using the pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models. The adsorption kinetic was best described by the second-order kinetic equation. The adsorption process was controlled by both external mass transfer and intraparticle diffusion. Activated carbon prepared from bottle gourd was shown to be a promising material for adsorption of Direct Black 38 from aqueous solution.

Activated carbon prepared from yerba mate used as a novel adsorbent for removal of tannery dye from aqueous solution

Activated carbon prepared from yerba mate (Ilex paraguariensis) was used as adsorbent for the removal of tannery dye from aqueous solution. The activated carbon was characterized, and it showed a mesoporous texture, with surface area of 537.4 m2 g−1. The initial dye concentration, contact time and pH influenced the adsorption capacity. The equilibrium data were in good agreement with both Langmuir and Freundlich isotherms. The adsorption kinetics of the tannery dye on activated carbon prepared from yerba mate followed a pseudo-second-order model. The adsorption process was found to be controlled by both external mass-transfer and intraparticle diffusion, but the external diffusion was the dominating process. This work highlights the potential application of activated carbon produced from yerba mate in the field of adsorption.

Application of Papaya Seeds as a Macro-/Mesoporous Biosorbent for the Removal of Large Pollutant Molecule from Aqueous Solution: Equilibrium, Kinetic, and Mechanism Studies

The potential use of papaya seeds as biosorbent for the removal of a large dye molecule, Procion Red, from aqueous solution was investigated. Papaya seeds were characterized by nitrogen adsorption/desorption isotherms and scanning electron microscopy. The results revealed that the papaya seeds exhibit a macro-/mesoporous structure, which is desirable for applications in adsorption processes. The models of Langmuir, Freundlich, and Temkin were employed to fit the equilibrium data, where the Langmuir model showed the most suitable fitting. The maximum adsorption capacity for Procion red dye was found to be 73.26 mg g−1. Pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were used to analyze the kinetic data obtained at different concentrations of dye. The adsorption process of Procion red dye followed the pseudo-second-order and intraparticle diffusion models. The results indicated that the adsorbent used in this work is adequate for the treatment of large dye molecules containing in aqueous solutions. This work highlights the potential application of papaya seeds in the field of adsorption.

Preparation of Zinc Tungstate (ZnWO4) Particles by Solvo-hydrothermal Technique and their Application as Support for Inulinase Immobilization

ZnWO4 particles were synthesized as a single-phase by a simple and easy solvo-hydrothermal technique using water-ethylene glycol mixture as solvent, without using surfactant. Physical properties of produced particles were analyzed by X-ray diffraction (XRD), infrared spectroscopy (FTIR), surface area (BET), particles size distribution and atomic force microscopy (AFM). This material was used as support for inulinase immobilization by physical adsorption and the influence of temperature (30 and 50 oC) was evaluated. Material with mesoporous characteristic and with a surface area of 35.5 m2.g-1 was obtained. According to the findings, ZnWO4 present a satisfactory inulinase adsorption, and the better result was 605 U.g-1 support at 30 oC. Therefore, ZnWO4 particles prepared by one-step solvo/hydrothermal route provide a new potential support for inulinase immobilization.