Marcio A. Mazutti

Synthesis of zinc aluminate (ZnAl2O4) spinel and its application as photocatalyst

ZnAl2O4 spinel was synthesized by co-precipitation using ammonia as precipitating agent, followed by thermal treatment at 750 oC. The structural properties of particles were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), differential thermal analysis (DTA), and N2 adsorption/desorption isotherms (BET) techniques. The photocatalytic activity was evaluated in the degradation of organic pollutant in aqueous solution under sunlight. The results showed that the ZnAl2O4 particles exhibited a mesoporous structure, and a promising photocatalytic activity for the degradation of pollutant molecules.

Pretreatment of sugarcane bagasse using supercritical carbon dioxide combined with ultrasound to improve the enzymatic hydrolysis.

This work evaluates the pretreatment of sugarcane bagasse combining supercritical carbon dioxide (SC-CO2) and ultrasound to enhance the enzymatic hydrolysis of pretreated bagasse. In a first step the influence of process variables on the SC-CO2 pretreatment to enhance the enzymatic hydrolysis was evaluated by mean of a Plackett-Burmann design. Then, the sequential treatment combining ultrasound+SC-CO2 was evaluated. Results show that treatment using SC-CO2 increased the amount of fermentable sugar obtained of about 280% compared with the non-treated bagasse, leading to a hydrolysis efficiency (based on the amount of cellulose) as high as 74.2%. Combining ultrasound+SC-CO2 treatment increased about 16% the amount of fermentable sugar obtained by enzymatic hydrolysis in comparison with the treatment using only ultrasound. From the results presented in this work it can be concluded that the combined ultrasound+SC-CO2 treatment is an efficient and promising alternative to carry out the pretreatment of lignocellulosic feedstock at relatively low temperatures without the use of hazardous solvents.

Enzymatic synthesis of ascorbyl palmitate in ultrasound-assisted system: Process optimization and kinetic evaluation

This work is focused on the optimization of reaction parameters for the synthesis of ascorbyl palmitate catalyzed by Candida antarctica lipase in different organic solvents under ultrasound irradiation. The sequential strategy of experimental design proved to be useful in determining the optimal conditions for reaction conversion in tert-butanol system using Novozym 435 as catalyst. The optimum production was achieved at 70°C, ascorbic acid to palmitic acid molar ratio of 1:9, enzyme concentration of 5 wt% at 3h of reaction, resulting in an ascorbyl palmitate conversion of about 27%. Reaction kinetics for ascorbyl palmitate production in ultrasound device showed that satisfactory reaction conversions (∼26%) could be achieved in short reaction times (2h). The empirical kinetic model proposed is able to satisfactorily represent and predict the experimental data.

Recent advances on biobutanol production

Recent studies have shown that butanol is a potential gasoline replacement that can also be blended in significant quantities with conventional diesel fuel. However, biotechnological production of butanol has some challenges such as low butanol titer, high cost feedstocks and product inhibition. The present work reviewed the technical and economic feasibility of the main technologies available to produce biobutanol. The latest studies integrating continuous fermentation processes with efficient product recovery and the use of mathematical models as tools for process scale-up, optimization and control are presented.

Mathematical modeling and simulation of inulinase adsorption in expanded bed column

A mathematical model for an expanded bed column was developed to predict breakthrough curves for inulinase adsorption on Streamline SP ion-exchange adsorbent, using a crude fermentative broth with cells as the feedstock. The kinetics and mass transfer parameters were estimated using the PSO (particle swarm optimization) heuristic algorithm. The parameters were estimated for each expansion degree (ED) using three breakthrough curves at initial inulinase concentrations of 65.6UmL(-1). In sequence, the model parameters for an ED of 2.5 were validated using the breakthrough curve at an initial concentration of 114.4UmL(-1). The applicability of the validated model in process optimization was investigated, using the model as a process simulator and experimental design methodology to optimize the column and process efficiencies. The results demonstrated the usefulness of this methodology for expanded bed adsorption processes.

Evaluation of activity of a commercial amylase under ultrasound-assisted irradiation

The main objective of this work was to evaluate the effects of ultrasound irradiation on the activity of a commercial amylase. A central composite design was carried out to assess the effects of temperature and pH on the enzyme activity in the presence and absence of ultrasound irradiation. The activation energy, the influence of treatment time as well as the substrate concentration on enzyme activity were also determined in the presence and absence of ultrasound irradiation. The results demonstrated that the effect of temperature was less pronounced in the presence of ultrasound, resulting in a decreasing of about 80% in the activation energy in comparison with the value obtained in the absence. The enzyme showed activities about 3 times higher for temperatures up to 40 °C in the presence of ultrasound. The pH negatively affected the activity in the presence of ultrasound, whereas in the absence a positive effect was verified. The ultrasound irradiation is a promising technology to be used in enzymatic reaction due to its positive effects on enzyme activity.

Removal of hazardous pharmaceutical dyes by adsorption onto papaya seeds

Papaya (Carica papaya L.) seeds were used as adsorbent to remove toxic pharmaceutical dyes (tartrazine and amaranth) from aqueous solutions, in order to extend application range. The effects of pH, initial dye concentration, contact time and temperature were investigated. The kinetic data were evaluated by the pseudo first-order, pseudo second-order and Elovich models. The equilibrium was evaluated by the Langmuir, Freundlich and Temkin isotherm models. It was found that adsorption favored a pH of 2.5, temperature of 298 K and equilibrium was attained at 180-200 min. The adsorption kinetics followed the pseudo second-order model, and the equilibrium was well represented by the Langmuir model. The maximum adsorption capacities were 51.0 and 37.4 mg g(-1) for tartrazine and amaranth, respectively. These results revealed that papaya seeds can be used as an alternative adsorbent to remove pharmaceutical dyes from aqueous solutions.

Adsorption of Textile Dye on Zinc Stannate Oxide: Equilibrium, Kinetic and Thermodynamics Studies

Zn2SnO4 powder was prepared by hydrothermal process at 200°C for 12 h. The material was characterized by X-ray-diffraction and surface area. The synthesized sample presented a pure phase and a surface area of 48.8 m2 · g−1. It was used as adsorbent to remove the Reactive Red 141 that is a azo textile dye. The adsorption kinetics of the textile dye on Zn2SnO4 followed the pseudo-second-order model. The adsorption process was found to be controlled by both external mass transfer and intraparticle diffusion. The equilibrium data were in good agreement with both Langmuir and Freundlich isotherms. Thermodynamic parameters were calculated, and the results revealed that the adsorption process is endothermic in nature, with weak forces of the Van der Walls acting.

Kinetics of lipase-catalyzed synthesis of soybean fatty acid ethyl esters in pressurized propane.

This work reports new experimental data and mathematical modeling of lipase-catalyzed biodiesel production using soybean oil and ethanol as substrates and pressurized n-propane as solvent. The experiments were carried out in a batch reactor, recording the reaction kinetics and evaluating the effects of temperature in the range of 45-70 degrees C, enzyme content from 1 to 20 wt% and oil to ethanol molar ratios of 1:3, 1:6, 1:9 and 1:15. The solvent to substrates mass ratio and pressure were set at 2:1 and 50 bar, respectively. Results showed that lipase-catalyzed alcoholysis in propane medium might be a potential alternative to conventional techniques for biodiesel production, since good conversions were obtained at mild temperature and pressure conditions. The semi-empirical mathematical model based on balance equations, adopted to describe the transesterification kinetics in pressurized n-propane, yielded relative deviations between experimental and calculated values lower than 10%, thus allowing a satisfactory representation of experimental results and a better understanding of the transesterification reaction.

Chemical profile and antimicrobial activity of Boldo (Peumus boldus Molina) extracts obtained by compressed carbon dioxide extraction

This work reports the effects of temperature (20 to 50oC) and pressure (100 to 250 bar) on the extraction yield, chemical characteristics and antimicrobial activity of extracts of Peumus boldus Molina obtained by compressed carbon dioxide extraction. Results showed that the extraction variables affect the extraction yield and the chemical distribution of the major compounds present in the extracts. The extracts were chemically analyzed with regard to 1,8-cineole, trans-sabinene, pinocarveol, pinocarvone, 4-terpineol, ascaridole, piperitone oxide, limonene dioxide and n-eicosane in a GC/MSD. Antimicrobial tests demonstrated that the high-pressure CO2 extracts had activity against 13 bacteria and that better action was verified with extracts obtained at a lower CO2 extraction density and a higher temperature.