Carolyn C. Elam

Realizing the hydrogen future: the International Energy Agency's efforts to advance hydrogen energy technologies

Realizing the hydrogen future: the International Energy Agnency´s effort to advance hydrogen energy technologies

Identification of QTLs influencing wood property traits in loblolly pine (Pinus taeda L.). II. Chemical wood properties

Abstract Chemical wood property traits were analyzed for the presence of quantitative trait loci (QTLs) in a three-generation outbred pedigree of loblolly pine (Pinus taeda L.). These traits were assayed using pyrolysis molecular beam mass spectrometry and include mass spectrum peak intensities associated with carbohydrates, α-cellulose and hemicellulose sugars, and lignin. Models for projection to latent structures (PLS) were used to also estimate the chemical composition of cell walls (i.e., α-cellulose, galactan and lignin) from mass spectrum data using multivariate regression. Both earlywood and latewood fractions from the fifth annual ring were analyzed for each trait. An interval mapping approach designed for an outbred pedigree was used to estimate the number of QTLs, the magnitude of QTL effects, and their genomic position. Eight unique QTLs influencing cell wall chemistry were detected from multiple peak intensities and/or PLS estimates using the one- and two-QTL models. Significant differences in chemical contents were observed among the populations from North Carolina vs Oklahoma, and results from QTL×environment analyses suggest that QTLs interact with environmental location. QTLs should be verified in larger experiments and in different genetic and environmental backgrounds. QTL mapping will help towards eventually identifying genes having a major effect on chemical wood properties.

Hydrogen from biomass: state of the art and research challenges

The report was prepared for the International Energy Agency (IEA) Agreement on the Production and Utilization of Hydrogen, Task 16, Hydrogen from Carbon-Containing Materials. Hydrogens share in the energy market is increasing with the implementation of fuel cell systems and the growing demand for zero-emission fuels. Hydrogen production will need to keep pace with this growing market. In the near term, increased production will likely be met by conventional technologies, such as natural gas reforming. In these processes, the carbon is converted to CO2 and released to the atmosphere. However, with the growing concern about global climate change, alternatives to the atmospheric release of CO2 are being investigated. Sequestration of the CO2 is an option that could provide a viable near-term solution. Reducing the demand on fossil resources remains a significant concern for many nations. Renewable-based processes like solar- or wind-driven electrolysis and photobiological water splitting hold great promise for clean hydrogen production; however, advances must still be made before these technologies can be economically competitive. For the near-and mid-term, generating hydrogen from biomass may be the more practical and viable, renewable and potentially carbon-neutral (or even carbon-negative in conjunction with sequestration) option. Recently, the IEA Hydrogen Agreement launched a new task to bring together international experts to investigate some of these near- and mid-term options for producing hydrogen with reduced environmental impacts. This review of the state of the art of hydrogen production from biomass was prepared to facilitate in the planning of work that should be done to achieve the goal of near-term hydrogen energy systems. The relevant technologies that convert biomass to hydrogen, with emphasis on thermochemical routes are described. In evaluating the viability of the conversion routes, each must be put in the context of the availability of appropriate feedstocks and deployment scenarios that match hydrogen to the local markets. Co-production opportunities are of particular interest for near-term deployment since multiple products improve the economics; however, co-product development is not covered in this report. Biomass has the potential to accelerate the realization of hydrogen as a major fuel of the future. Since biomass is renewable and consumes atmospheric CO2 during growth, it can have a small net CO2 impact compared to fossil fuels. However, hydrogen from biomass has major challenges. There are no completed technology demonstrations. The yield of hydrogen is low from biomass since the hydrogen content in biomass is low to being with (approximately 6% versus 25% for methane) and the energy content is low due to the 40% oxygen content of biomass. Since over half of the hydrogen from biomass comes from splitting water in the steam reforming reaction, the energy content of the feedstock is an inherent limitation of the process . The low yield of hydrogen on a weight basis is misleading since the energy conversion efficiency is high. However, the cost for growing, harvesting, and transporting biomass is high. Thus even with reasonable energy efficiencies, it is not presently economically competitive with natural gas steam reforming for stand-alone hydrogen without the advantage of high-value co-products. Additionally, as with all sources of hydrogen, production from biomass will require appropriate hydrogen storage and utilization systems to be developed and deployed. The report also looked at promising areas for further research and development. The major areas for R,D and D are: feedstock preparation and feeding; gasification gas conditioning; system integration; modular systems development; valuable co-product integration; and larger-scale demonstrations. These are in addition to the challenges for any hydrogen process in storage and utilization technologies.

Two High-Throughput Techniques for Determining Wood Properties as Part of a Molecular Genetics Analysis of Hybrid Poplar and Loblolly Pine

Two new high-through put techniques, computer tomography X-ray densitometry (CT scan) and pyrolysis molecular beam mass spectrometry (pyMBMS), coupled with quantitative trait loci (QTL) analysis, were tested as a means to overcome the time and cost associated with conventional characterization of biomass feedstock components. Applications of these two techniques were evaluated using hybrid poplar for the CT scan and loblolly pine for the pyMBMS. Segregating progeny from hybrid poplar varied in specific gravity, with individual mean estimates ranging from 0.21–0.41. Progeny from loblolly pine varied in lignin, α cellulose, and mannan contents, with individual mean estimates of lignin content ranging from 28.7–33.1%, α cellulose content from 28.8–43.5% and mannan content from 4.2–10.1%. QTL analysis of the loblolly pine data suggested that eleven QTLs were associated with individual feedstock characteristics and that two QTLs for several feedstock components were linked to the same position on the loblolly pine genetic map. Each QTL individually accounted for 7–13% of the total phenotypic variation in associated loblolly pine feedstock components.

Catalytic pyrolysis of nylon-6 to recover caprolactam

Abstract Catalytic pyrolysis has been proposed as a possible process for the recovery of caprolactam from waste nylon-6. Promising process conditions, i.e. catalyst and temperature were identified using a micro-scale reactor/molecular-beam mass-spectrometer system. At 330–360°C, in the presence of α -alumina supported KOH, the reaction proceeded at a high rate and selectivity. Only a few minutes were needed to complete the nylon-6 depolymerization with a caprolactam yield of 85%. These results were confirmed in a bench-scale fluidized bed reactor system.

Use of pyrolysis molecular beam mass spectrometry (py-MBMS) to characterize forest soil carbon: method and preliminary results

The components of soil organic matter (SOM) and their degradation dynamics in forest soils are difficult to study and thus poorly understood, due to time-consuming sample collection, preparation, and difficulty of analyzing and identifying major components. As a result, changes in soil organic matter chemical composition as a function of age, forest type, or disturbance have not been examined. We applied pyrolysis molecular beam mass spectrometry (py-MBMS), which provides rapid characterization of SOM of whole soil samples. to the Tionesta soil samples described by Hoover, C.M., Magrini, K.A., Evans, R.J., 2002. Soil carbon content and character in an old growth forest in northwestern Pennsylvania: a case study introducing molecular beam mass spectrometry (PY-MBMS). Environmental Pollution 116 (Supp. 1), S269-S278. Our goals in this work were to: (1) develop and demonstrate an advanced, rapid analytical method for characterizing SOM components in whole soils, and (2) provide data-based models to predict soil carbon content and residence time from py-MBMS analysis. Using py-MBMS and pattern recognition techniques we were able to statistically distinguish among four Tionesta sites and show an increase in pyrolysis products of more highly decomposed plant materials at increasing sample depth. For example, all four sites showed increasing amounts of older carbon (phenolic and aromatic species) at deeper depths and higher amounts of more recent carbon (carbohydrates and lignin products) at shallower depths. These results indicate that this type of analysis could be used to rapidly characterize SOM for the purpose of developing a model, which could be used in monitoring the effect of forest management practices on carbon uptake and storage.