Celal Candirli

Autologous blood injection to the temporomandibular joint: magnetic resonance imaging findings

Purpose The aim of this study was to investigate the effect of the autologous blood injection (ABI) for chronic recurrent temporomandibular joint (TMJ) dislocation using magnetic resonance imaging (MRI). Materials and Methods ABI was applied to 14 patients who had chronic recurrent TMJ dislocation. MRIs of the patients were taken and compared before and one month after the injection. Results All of the patients had no dislocations of their TMJs on clinical examination one month after the injection. In the pre-injection, unilateral or bilateral TMJ dislocations were observed on MRIs in all patients. One month after the injection, TMJ dislocations were not observed in MRI evaluation of any patients. A significant structural change that caused by ABI was not observed. Conclusion The procedure was easy to perform and it caused no foreign body reaction. However, it was unclear how the procedure prevented the dislocation.

Treatment of a skeletal Class II malocclusion using fixed functional appliance with miniplate anchorage.

Based on our literature search, we found that the use of miniplate anchorage with Forsus fatigue-resistance device (FRD) has not yet been reported. Therefore, the aim of the present case report was to present the treatment of a patient with skeletal Class II malocclusion with mandibular retrusion using Forsus FRD with miniplate anchorage. Fixed appliances with 0.022-inch slots were attached to the maxillary teeth and after 8 months of the leveling and alignment of the upper arch, 0.019 × 0.025-inch stainless steel archwire was inserted and cinched back. Two weeks after the placement of the miniplates bilaterally at the symphysis of the mandible, Forsus FRD was adjusted to the miniplates with a 35-mm length of rod chosen. Nine months after the skeletal anchored Forsus worn, Class I canine and molar relations were achieved and overjet was eliminated.

Evaluation of the effects of skeletal anchoraged Forsus FRD using miniplates inserted on mandibular symphysis: A new approach for the treatment of Class II malocclusion

OBJECTIVE To evaluate the skeletal, dentoalveolar, and soft tissue effects of the Forsus Fatigue Resistant Device (FRD) appliance with miniplate anchorage for the treatment of skeletal Class II malocclusion. MATERIAL AND METHODS The prospective clinical study group included 17 patients (11 girls and 6 boys; mean age 12.96 ± 1.23 years) with Class II malocclusion due to mandibular retrusion and treated with skeletal anchoraged Forsus FRD. After 0.019 × 0.025-inch stainless steel archwire was inserted and cinched back in the maxillary arch, two miniplates were placed bilaterally on the mandibular symphysis. Then, the Forsus FRD EZ2 appliance was adjusted to the miniplates without leveling the mandibular arch. The changes in the leveling and skeletal anchoraged Forsus FRD phases were evaluated by means of the Paired and Students t-tests using the cephalometric lateral films. RESULTS The success rate of the miniplates was found to be 91.5% (38 of 42 miniplates). The mandible significantly moved forward (P < .001) and caused a significant restraint in the sagittal position of the maxilla (P < .001). The overjet correction (-5.11 mm) was found to be mainly by skeletal changes (A-VRL, -1.16 mm and Pog-VRL, 2.62 mm; approximately 74%); the remaining changes were due to the dentoalveolar contributions. The maxillary and mandibular incisors were significantly retruded (P < .001). CONCLUSION This new approach was an effective method for treating skeletal Class II malocclusion due to the mandibular retrusion via a combination of skeletal and dentoalveolar changes.

Effects of early unilateral mandibular first molar extraction on condylar and ramal vertical asymmetry

Objective: The objective of the following study is to investigate the mandibular vertical asymmetry in a group of patients with early unilateral mandibular first molar extractions. Materials and Methods: Mandibular asymmetry index measurements (condylar, ramal and condylar-plus-ramal) were performed on the panoramic radiographs of a study group including 51 patients (mean age: 18.60 ± 1.11 years) and a control group of 51 patients (mean age: 18.53 ± 1.29 years). Group I included patients with a unilateral mandibular first molar extracted before the age of 12 years. Group II included patients with no extractions and had excellent Class I relationships, no missing teeth and slight or moderate anterior crowding. A paired t-test was used to determine possible statistically significant differences between the sides for the measurements. Student′s t-test was used for the comparison of asymmetry index values between the groups and genders. Results: No group showed statistically significant sex-or side-specific differences for posterior vertical height measurements. Condylar asymmetry index and ramal asymmetry index measurements were not statistically different between the groups, while condylar-plus-ramal asymmetry index (CRAI) measurements were statistically different between the groups (P = 0.019). Conclusions: A slight difference for CRAI value was found in patients with early unilateral mandibular first molar extractions.

Clinicoradiological evaluation of dermis-fat grafts after temporomandibular joint discectomy: A retrospective study

Purpose: The aim of this study was to compare the preoperative and 1-year postoperative clinical and radiological findings of the patients after unilateral temporomandibular joint (TMJ) discectomy with inter-positional abdominal dermis-fat graft. Materials and Methods: Fourteen patients underwent unilateral discectomy and dermis-fat grafting between 2008 and 2010. Preoperative and 1-year postoperative clinical parameters such as maximum mouth openings (MMO) and lateral movements (LM) of the mandible were recorded. Additionally, preoperative and postoperative magnetic resonance imagingwas obtained to determine the duration of operated TMJs. Results: All of the 14 patients showed the improvement in mandibular mobility and function. There was a significant increase in the MMO and LM during the follow-up period. Pain levels at follow-up were significantly lower than the preoperative levels. Radiologically, the dermis-fat graft was detected within the joint or surrounding the condyle in all 14 operated joints. The graft material that was found within the joint space was mainly grey in four joints. Ten joints showed heterogeneous material composed of fat interspersed with grey tissue. Conclusion: Discectomy and dermis-fat grafting appears to be a successful surgical option regarding to the clinical parameters. However, summed degenerative changes depending on surgical operation should be retained.

Unilateral maxillary molar distalization using zygoma-gear appliance

The aim of the present case report was to present the treatment of a patient with Class II subdivision using the zygoma-gear appliance (ZGA) for unilateral maxillary molar distalization and fixed appliances for the further treatment needs. The ZGA consisted of a miniplate, an inner bow and a sentalloy closed coil spring. Three weeks after the miniplate was placed on zygomathic buttress, a distalization force of 350 g was unilaterally applied to the maxillary left first molar through the sentalloy closed coil spring. After a distalization period of 6 months, a super Class I relationship was achieved and the maxillary left first molar moved 5 mm distally without anterior movement of the anchor premolars. In addition, the maxillary left molar slightly tipped distally (2.4΀), the maxillary incisors slightly retruded (about −5΀) and the overjet decreased (−1.4 mm). Then, preadjusted fixed appliances (0.022 Χ 0.028-in, Roth system) were placed in both arches and the maxillary premolar and canine were distalized using the miniplate anchorage after the leveling and alignment procedure. Class I molar and canine relationships, acceptable overjet and overbite were established in a total treatment time of 18 months.

Novel Retromandibular Subparotideomasseteric Fascial Approach for Placement of a Temporomandibular Joint Prosthesis

For placement of a temporomandibular joint prosthesis, preauricular and retromandibular approaches are used. The main complication of the retromandibular approach is marginal mandibular nerve damage. In this technical study, the retromandibular subparotideomasseteric fascial approach is introduced as an alternative to avoid the complications of the conventional retromandibular approach.

Trabecular structural changes in the mandibular condyle caused by degenerative osteoarthritis: a comparative study by cone-beam computed tomography imaging

ObjectivesTemporomandibular osteoarthritis causes pain and loss of function. In advanced cases, it may also result in destruction of joint cartilage surfaces and bone structure.MethodsThis study was performed to examine the potential changes in the condylar trabecular bone structure in patients with temporomandibular osteoarthritis. Condylar trabecular structures were compared between 35 healthy patients and 35 patients with temporomandibular osteoarthritis by a box-counting method using fractal dimensional analysis on cone-beam computed tomography images.ResultsThe average fractal dimensions of patients with temporomandibular osteoarthritis and healthy patients were 1.18 and 1.23, respectively. This difference was statistically significant (p ≤ 0.05).ConclusionsOur results add to the existing preliminary knowledge regarding the osteoporotic changes that occur in the trabecular structure under the subchondral bone, which is normally not seen on radiographic images, as well as the destruction and remodeling that occur on the condyle surface, which is visible on radiographic images.

Interpositional Flap Reconstruction of Temporomandibular Joint Using a Novel Anterior-Based Mastoid Flap Technique

In this report, it was aimed to use the anterior-based mastoid fascia flap as an interpositional graft in TMJ surgery. This technical report, along with this characteristic, is the first in the literature.

Short term histopathological effects of GaAlAs laser on experimentally induced TMJ osteoarthritis in rabbits

The aim of this study was to evaluate the biostimulation (BS) effect of the gallium-aluminum-arsenide (GaAlAs) diode laser by histopathology with an experimental osteoarthritis (OA) model in the temporomandibular joints (TMJ) of rabbits, in the early period. GaAlAs diode laser is used for pain reduction in TMJ disorders. Twenty-four adult male New Zealand white rabbits were randomly divided into three equal groups: Control Group (CG), Study Group 1 (SG-1), and Study Group 2 (SG-2). Mono-iodoacetate (MIA) was administered to the right TMJs of all rabbits. The rabbits did not undergo any treatment for four weeks to allow the development of osteoarthritis. In SG-1, laser BS was applied to the rabbits at 940 nm, 5 W, and 15 J/cm2 in continuous wave mode at 48-hour intervals for 14 sessions; and in SG-2, laser BS was applied with the same parameters at 24-hour intervals for 28 sessions. Laser BS was not applied to the rabbits in CG. All rabbits were sacrificed simultaneously. The TMJ cartilage, osteochondral junction, chondrocyte appearance, and subchondral ossification were evaluated histopathologically. There was no statistically significant difference between the groups in terms of cartilage, osteochondral junction, chondrocyte appearance, and subchondral ossification values (p > 0.05). The laser BS protocol used in the study had no positive histopathological effects on TMJ OA in the early period.