Changda Zheng

Roles of V-shaped pits on the improvement of quantum efficiency in InGaN/GaN multiple quantum well light-emitting diodes

The roles of V-shaped pits on the improvement of quantum efficiency in InGaN/GaN multiple quantum well (MQW) light-emitting diodes are investigated by numerical simulation. The simulation results show that V-shaped pits cannot only screen dislocations, but also play an important role on promoting hole injection into the MQWs. It is revealed that the injection of holes into the MQW via the sidewalls of the V-shaped pits is easier than via the flat region, due to the lower polarization charge densities in the sidewall structure with lower In concentration and {10–11}-oriented semi-polar facets.

Electroluminescence from the sidewall quantum wells in the V-shaped pits of InGaN light emitting diodes

InGaN/GaN multi-quantum well (MQW) light emitting diodes with heavily Mg doped and unintentionally doped (UID) low-temperature Al0.2Ga0.8N electron blocking layer (EBL) were investigated. Broad short-wavelength electroluminescence peak, which has strong relative intensity to the main emission, was found in the UID-EBL sample at cryogenic temperatures. Study suggests that the broad peak is emitted by the sidewall MQWs. This result indicates that the electroluminescence of sidewall MQWs, in which the carrier density is high enough, can be detected at cryogenic temperatures. The lineshape variation with current density reveals detailed information on the process of carrier injection into the sidewall MQWs.

Effect of Same-Temperature GaN Cap Layer on the InGaN/GaN Multiquantum Well of Green Light-Emitting Diode on Silicon Substrate

GaN green LED was grown on Si (111) substrate by MOCVD. To enhance the quality of InGaN/GaN MQWs, same-temperature (ST) GaN protection layers with different thickness of 8 Å, 15 Å, and 30 Å were induced after the InGaN quantum wells (QWs) layer. Results show that a relative thicker cap layer is benefit to get InGaN QWs with higher In percent at fixed well temperature and obtain better QW/QB interface. As the cap thickness increases, the indium distribution becomes homogeneous as verified by fluorescence microscope (FLM). The interface of MQWs turns to be abrupt from XRD analysis. The intensity of photoluminescence (PL) spectrum is increased and the FWHM becomes narrow.