Changduk Yang

Non-Fullerene Polymer Solar Cells Based on Alkylthio and Fluorine Substituted 2D-Conjugated Polymers Reach 9.5% Efficiency

Non-fullerene polymer solar cells (PSCs) with solution-processable n-type organic semiconductor (n-OS) as acceptor have seen rapid progress recently owing to the synthesis of new low bandgap n-OS, such as ITIC. To further increase power conversion efficiency (PCE) of the devices, it is of a great challenge to develop suitable polymer donor material that matches well with the low bandgap n-OS acceptors thus providing complementary absorption and nanoscaled blend morphology, as well as suppressed recombination and minimized energy loss. To address this challenge, we synthesized three medium bandgap 2D-conjugated bithienyl-benzodithiophene-alt-fluorobenzotriazole copolymers J52, J60, and J61 for the application as donor in the PSCs with low bandgap n-OS ITIC as acceptor. The three polymers were designed with branched alkyl (J52), branched alkylthio (J60), and linear alkylthio (J61) substituent on the thiophene conjugated side chain of the benzodithiophene (BDT) units for studying effect of the substituents on the photovoltaic performance of the polymers. The alkylthio side chain, red-shifted absorption down-shifted the highest occupied molecular orbital (HOMO) level and improved crystallinity of the 2D conjugated polymers. With linear alkylthio side chain, the tailored polymer J61 exhibits an enhanced JSC of 17.43 mA/cm(2), a high VOC of 0.89 V, and a PCE of 9.53% in the best non-fullerene PSCs with the polymer as donor and ITIC as acceptor. To the best of our knowledge, the PCE of 9.53% is one of the highest values reported in literature to date for the non-fullerene PSCs. The results indicate that J61 is a promising medium bandgap polymer donor in non-fullerene PSCs.

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

Simutaneously high open circuit voltage and high short circuit current density is a big challenge for achieving high efficiency polymer solar cells due to the excitonic nature of organic semdonductors. Herein, we developed a trialkylsilyl substituted 2D-conjugated polymer with the highest occupied molecular orbital level down-shifted by Si–C bond interaction. The polymer solar cells obtained by pairing this polymer with a non-fullerene acceptor demonstrated a high power conversion efficiency of 11.41% with both high open circuit voltage of 0.94u2009V and high short circuit current density of 17.32u2009mAu2009cm−2 benefitted from the complementary absorption of the donor and acceptor, and the high hole transfer efficiency from acceptor to donor although the highest occupied molecular orbital level difference between the donor and acceptor is only 0.11u2009eV. The results indicate that the alkylsilyl substitution is an effective way in designing high performance conjugated polymer photovoltaic materials.

Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%

Ternary organic solar cells (OSCs), with a simple structure, can be easily adopted as sub-cells in a tandem design, thereby further enhancing the power conversion efficiency (PCE). Considering the potential to surpass the theoretical PCE limit in OSCs, we incorporated a benzo[1,2-b;4,5-b′]dithiophene-based small molecule into a poly(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b′]dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl):[6,6]-phenyl-C71-butyric acid methyl ester host system. A hitherto unrealized PCE of 12.1% was achieved at the optimized composition of the ternary blend. The ternary blend surprisingly had a face-on and edge-on co-existent texture, which is far better than that of the face-on orientated host film. To the best of our knowledge, this intriguing result refutes for the first time a general paradigm that high-performance OSCs are unambiguously linked to face-on structures. Therefore, our study provides a new platform for refining the theoretical underpinning of multiple blending OSCs.

9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor

In the last two years, polymer solar cells (PSCs) developed quickly with n-type organic semiconductor (n-OSs) as acceptor. In contrast, the research progress of nonfullerene organic solar cells (OSCs) with organic small molecule as donor and the n-OS as acceptor lags behind. Here, we synthesized a D-A structured medium bandgap organic small molecule H11 with bithienyl-benzodithiophene (BDTT) as central donor unit and fluorobenzotriazole as acceptor unit, and achieved a power conversion efficiency (PCE) of 9.73% for the all organic small molecules OSCs with H11 as donor and a low bandgap n-OS IDIC as acceptor. A control molecule H12 without thiophene conjugated side chains on the BDT unit was also synthesized for investigating the effect of the thiophene conjugated side chains on the photovoltaic performance of the p-type organic semiconductors (p-OSs). Compared with H12, the 2D-conjugated H11 with thiophene conjugated side chains shows intense absorption, low-lying HOMO energy level, higher hole mobility and ordered bimodal crystallite packing in the blend films. Moreover, a larger interaction parameter (χ) was observed in the H11 blends calculated from Hansen solubility parameters and differential scanning calorimetry measurements. These special features combined with the complementary absorption of H11 donor and IDIC acceptor resulted in the best PCE of 9.73% for nonfullerene all small molecule OSCs up to date. Our results indicate that fluorobenzotriazole based 2D conjugated p-OSs are promising medium bandgap donors in the nonfullerene OSCs.

Chemically Robust Ambipolar Organic Transistor Array Directly Patterned by Photolithography

Organic ambipolar transistor arrays for chemical sensors are prepared on a flexible plastic substrate with a bottom-gate bottom-contact configuration to minimize the damage to the organic semiconductors, for the first time, using a photolithographically patternable polymer semiconductor. Well-balanced ambipolar charge transport is achieved by introducing graphene electrodes because of the reduced contact resistance and energetic barrier for electron transport.

High-Performance Furan-Containing Conjugated Polymer for Environmentally Benign Solution Processing

Developing semiconducting polymers that exhibit both strong charge transport capability via highly ordered structures and good processability in environmentally benign solvents remains a challenge. Given that furan-based materials have better solubility in various solvents than analogous thiophene-based materials, we have synthesized and characterized furanyl-diketopyrrolopyrrole polymer (PFDPPTT-Si) together with its thienyl-diketopyrrolopyrrole-based analogue (PTDPPTT-Si) to understand subtle changes induced by the use of furan instead of thiophene units. PTDPPTT-Si films processed in common chlorinated solvent exhibit a higher hole mobility (3.57 cm2 V-1 s-1) than PFDPPTT-Si films (2.40 cm2 V-1 s-1) under the same conditions; this greater hole mobility is a result of tightly aggregated π-stacking structures in PTDPPTT-Si. By contrast, because of its enhanced solubility, PFDPPTT-Si using chlorine-free solution processing results in a device with higher mobility (as high as 1.87 cm2 V-1 s-1) compared to that of the corresponding device fabricated using PTDPPTT-Si. This mobility of 1.87 cm2 V-1 s-1 represents the highest performances among furan-containing polymers reported to the best of our knowledge for nonchlorinated solvents. Our study demonstrates an important step toward environmentally compatible electronics, and we expect the results of our study to reinvigorate the furan-containing semiconductors field.

Robust nanogenerators based on graft copolymers via control of dielectrics for remarkable output power enhancement

Robust nanogenerator based on poly(tert-butyl acrylate)–grafted PVDF copolymers via dielectric constant control is demonstrated. A robust nanogenerator based on poly(tert-butyl acrylate) (PtBA)–grafted polyvinylidene difluoride (PVDF) copolymers via dielectric constant control through an atom-transfer radical polymerization technique, which can markedly increase the output power, is demonstrated. The copolymer is mainly composed of α phases with enhanced dipole moments due to the π-bonding and polar characteristics of the ester functional groups in the PtBA, resulting in the increase of dielectric constant values by approximately twice, supported by Kelvin probe force microscopy measurements. This increase in the dielectric constant significantly increased the density of the charges that can be accumulated on the copolymer during physical contact. The nanogenerator generates output signals of 105 V and 25 μA/cm2, a 20-fold enhancement in output power, compared to pristine PVDF–based nanogenerator after tuning the surface potential using a poling method. The markedly enhanced output performance is quite stable and reliable in harsh mechanical environments due to the high flexibility of the films. On the basis of these results, a much faster charging characteristic is demonstrated in this study.

Locking-In Optimal Nanoscale Structure Induced by Naphthalenediimide-Based Polymeric Additive Enables Efficient and Stable Inverted Polymer Solar Cells

Operational stability and high performance are the most critical issues that must be addressed in order to propel and advance the current polymer solar cell (PSC) technology to the next level, such as manufacturing and mass production. Herein, we report a high power conversion efficiency (PCE) of 11.2%, together with an excellent device stability in PTB7-Th:PC71BM-based PSCs in the inverted structure by introducing the n-type P(NDI2OD-T2) macromolecular additive (>75% PCE retention at high temperature up to 120 °C, >97% PCE retention after 6 months in inert conditions, >93% PCE retention after 2 months in air with encapsulation, and >80% PCE retention after 140 h in air without encapsulation). The PCE is the highest value ever reported in the single-junction systems based on the PTB7 family and is also comparable to the previously reported highest PCE of inverted PSCs. These promising results are attributed to the efficient optimization and stabilization of the blend film morphology in the photoactive layer, achieved using the P(NDI2OD-T2) additive. From the perspective of manufacturing, our studies demonstrate a promising pathway for fabricating low-cost PSCs with high efficiency as well as long-term stability.

Ultra-narrow-bandgap thienoisoindigo polymers: structure–property correlations in field-effect transistors

From a structural point of view, the newly conceived thienoisoindigo (TIIG) moiety can serve as an ideal building block for the synthesis of high-performance polymers. To expand the range of available TIIG-based conjugated polymers, herein we report the synthesis and characterization of two new TIIG-based donor–acceptor polymers (PTIIG-TT and PTIIG-TVT), containing either the thieno[3,2-b]thiophene (TT) or the (E)-2-(2-(thiophen-2-yl)vinyl)thiophene (TVT) moiety. In addition, we conducted a systematic investigation on the relationship between the microstructure of the polymer film and charge transport in organic field-effect transistors (OFETs) fabricated using these polymers. It was observed that the incorporation of a TVT moiety into the TIIG backbone imparts higher crystallinity and increases the molecular packing density, leading to an increased hole mobility (∼0.45 cm2 V−1 s−1) in PTIIG-TVT, compared with PTIIG-TT. When an Al electrode is used instead of a Au electrode in the OFET devices, both polymers exhibit outstanding ambipolar characteristics. This study advances the understanding of the structural features of TIIG-based polymers, which will potentially accelerate the improvement in the mobility of TIIG-based polymers.

Amphiphilic Graft Copolymers as a Versatile Binder for Various Electrodes of High‐Performance Lithium‐Ion Batteries

It is known that grafting one polymer onto another polymer backbone is a powerful strategy capable of combining dual benefits from each parent polymer. Thus amphiphilic graft copolymer precursors (poly(vinylidene difluoride)-graft-poly(tert-butylacrylate) (PVDF-g-PtBA)) have been developed via atom transfer radical polymerization, and demonstrated its outstanding properties as a promising binder for high-performance lithium-ion battery (LIB) by using in situ pyrolytic transformation of PtBA to poly(acrylic acid) segments. In addition to its superior mechanical properties and accommodation capability of volume expansion, the Si anode with PVDF-g-PtBA exhibits the excellent charge and discharge capacities of 2672 and 2958 mAh g(-1) with the capacity retention of 84% after 50 cycles. More meaningfully, the graft copolymer binder shows good operating characteristics in both LiN0.5 M1.5 O4 cathode and neural graphite anode, respectively. By containing such diverse features, a graft copolymer-loaded LiN0.5 M1.5 O4 /Si-NG full cell has been successfully achieved, which delivers energy density as high as 546 Wh kg(-1) with cycle retention of ≈70% after 50 cycles (1 C). For the first time, this work sheds new light on the unique nature of the graft copolymer binders in LIB application, which will provide a practical solution for volume expansion and low efficiency problems, leading to a high-energy-density lithium-ion chemistry.