Cheong-Weon Cho

Influence of the delivery systems using a microneedle array on the permeation of a hydrophilic molecule, calcein

Despite the advantages of drug delivery through the skin, such as easy accessibility, convenience, prolonged therapy, avoidance of the liver first-pass metabolism and a large surface area, transdermal drug delivery is only used with a small subset of drugs because most compounds cannot cross the skin at therapeutically useful rates. Recently, a new concept was introduced known as microneedles and these could be pierced to effectively deliver drugs using micron-sized needles in a minimally invasive and painless manner. In this study, biocompatible polycarbonate (PC) microneedle arrays with various depths (200 and 500 microm) and densities (45, 99 and 154 ea/cm2) were fabricated using a micro-mechanical process. The skin permeability of a hydrophilic molecule, calcein (622.5D), was examined according to the delivery systems of microneedle, drug loading, depth of the PC microneedle, and density of the PC microneedle. The skin permeability of calcein was the highest when the calcein gel was applied to the skin with the 500 microm-depth PC microneedle, simultaneously. In addition, the skin permeability of calcein was the highest when 0.1g of calcein gel was coupled to the 500 microm-depth PC microneedle (154 ea/cm2) as well as longer microneedles and larger density of microneedles. Taken together, this study suggests that a biocompatible PC microneedle might be a suitable tool for transdermal drug delivery system of hydrophilic molecules with the possible applications to macromolecules such as proteins and peptides.

Enhanced efficacy by percutaneous absorption of piroxicam from the poloxamer gel in rats.

The pharmacokinetics and anti-inflammatory activity of piroxicam from the poloxamer 407 gel were determined to investigate percutaneous absorption of piroxicam from poloxamer gels in rats. The poloxamer 407 gel containing 1% piroxicam showed significant inhibition of carragenin-induced rat foot swelling when compared to the control group. The extent of inhibition of swelling (%) showed a linear relationship with the logarithm of piroxicam dose within approximately 0.4-3.2 mg/kg. The enhancing effect of polyoxyethylene-2-oleyl ether, non-ionic surfactant on the percutaneous absorption of piroxicam from poloxamer 407 gel was evaluated in rats. The piroxicam gel containing polyoxyethylene-2-oleyl ether increaesd the relative bioavailability approximately 1.8-fold compared with the gel without enhancer. Percutaneous administration of piroxicam gel containing polyoxyethylene-2-oleyl ether to rats showed a relatively constant, sustained blood concentration with minimal fluctuation.

Physicochemical Characterizations of Piroxicam-Poloxamer Solid Dispersion

To develop an efficient topical delivery system for piroxicam using poloxamer gel formulation, physicochemical behavior of piroxicam in poloxamer was studied. The gelling property of poloxamer and the solubility of piroxicam in the poloxamer were investigated. The interaction between piroxicam and poloxamer was studied by x-ray diffractometry (XRD), infrared (IR) spectroscopy and differential thermal analysis (DTA) with a solid dispersion, coprecipitate, or physical mixture. Poloxamer 407 solutions showed the property of a gel when the concentration was higher than 15% (w/w) and poloxamer 407 increased the aqueous solubility of piroxicam by about 11-fold at the concentration of 22.5% (w/w). The results of XRD did not show the crystalline from of piroxicam in the solid dispersion and results of IR spectroscopic analysis showed an association between functional groups of piroxicam and poloxamer.

Practical preparation procedures for docetaxel-loaded nanoparticles using polylactic acid-co-glycolic acid

Background Nanoparticles fabricated from the biodegradable and biocompatible polymer, polylactic-co-glycolic acid (PLGA), are the most intensively investigated polymers for drug delivery systems. The objective of this study was to explore fully the development of a PLGA nanoparticle drug delivery system for alternative preparation of a commercial formulation. In our nanoparticle fabrication, our purpose was to compare various preparation parameters. Methods Docetaxel-loaded PLGA nanoparticles were prepared by a single emulsion technique and solvent evaporation. The nanoparticles were characterized by various techniques, including scanning electron microscopy for surface morphology, dynamic light scattering for size and zeta potential, x-ray photoelectron spectroscopy for surface chemistry, and high-performance liquid chromatography for in vitro drug release kinetics. To obtain a smaller particle, 0.2% polyvinyl alcohol, 0.03% D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), 2% Poloxamer 188, a five-minute sonication time, 130 W sonication power, evaporation with magnetic stirring, and centrifugation at 8000 rpm were selected. To increase encapsulation efficiency in the nanoparticles, certain factors were varied, ie, 2–5 minutes of sonication time, 70–130 W sonication power, and 5–25 mg drug loading. Results A five-minute sonication time, 130 W sonication power, and a 10 mg drug loading amount were selected. Under these conditions, the nanoparticles reached over 90% encapsulation efficiency. Release kinetics showed that 20.83%, 40.07%, and 51.5% of the docetaxel was released in 28 days from nanoparticles containing Poloxamer 188, TPGS, or polyvinyl alcohol, respectively. TPGS and Poloxamer 188 had slower release kinetics than polyvinyl alcohol. It was predicted that there was residual drug remaining on the surface from x-ray photoelectron spectroscopy. Conclusion Our research shows that the choice of surfactant is important for controlled release of docetaxel.

Permeation of Piroxicam from the Poloxamer Gels

Topical formulations of piroxicam were prepared using poloxamer 407 or poloxamer 188 by a cold method, and the permeation characteristics of piroxicam were evaluated. The permeation rate of piroxicam across the synthetic cellulose membrane and the rat skin decreased as the concentration of poloxamer increased. Though poloxamer gel exhibits reversed thermal behavior, the permeation rate of piroxicam increased with increasing temperature, indicating that the diffusional pathway of piroxicam is a water channel within the gel formulation. The pH of the gel did not affect the permeation rate of piroxicam significantly. As the concentration of piroxicam in the gel formulation increased, the permeation rate of piroxicam increased up to 1% and reached a plateau above 1%. Among various enhancers tested, polyoxyethylene-2-oleyl ether showed the highest enhancing effect, with an enhancement ratio of 2.84. Based on experimental results, the permeation rate of piroxicam can be controlled by changing the poloxamer concentration or drug concentration and by the addition of an appropriate enhancer.

Controlled release and reversal of multidrug resistance by co-encapsulation of paclitaxel and verapamil in solid lipid nanoparticles.

Paclitaxel (PTX) has been used in the treatment of wide range of cancers but its entry into cancer cell is restricted by p-glycoprotein (p-gp). Also, it was reported that verapamil (VP) could inhibit p-gp efflux. Hence, three kinds of solid lipid nanoparticles (SLN) such as PVS (PTX and VP co-loaded SLN), PSV (PTX loaded SLN, later added VP) and PVSV (PTX and VP co-loaded SLN, later added VP) were prepared to overcome MDR by combination of PTX and VP. PVS was the SLN loaded with both PTX and VP at the same time. PSV was the SLN loaded with PTX and then modified with VP - complexed hydroxypropyl-β-cylcodextrin (HPCD). Finally, PVSV was the SLN loaded with PTX and half of VP at the same time subsequently, modified with half of VP - complexed HPCD. The physicochemical characterizations of PVS, PSV or PVSV such as particle size, zeta potential, encapsulation efficiency or in vitro PTX release were examined. PVSV showed that release of VP was higher than PTX solution in first 15h and sustained release of both VP and PTX. PVSV showed significantly higher cytotoxicity and cellular uptake than that of the PTX solution in MCF-7/ADR resistant cells. Furthermore, PVSV significantly down regulated the expression of p-gp than the PTX solution in MCF-7/ADR resistant cells. Based on these findings, this study indicated that the PVSV exhibited great potential for breast cancer therapy.

Gene delivery using a derivative of the protein transduction domain peptide, K-Antp.

Due to their intracellular permeability, protein transduction domains (PTDs) have been widely used to deliver proteins and peptides to mammalian cells. However, their performance in gene delivery has been relatively poor. To improve the efficiency of PTD-mediated gene delivery, we synthesized a new peptide, KALA-Antp (K-Antp), which contains the sequences for PTD of the third alpha-helix of Antennapedia (Antp) homeodomain and the fusogenic peptide KALA. In this configuration, Antp is designed to provide the cell permeation capacity and nuclear localization signal, while the KALA moiety to promote cellular entry of the peptide-DNA complex. An optimal K-Antp/DNA formula was nearly 400-600 fold more efficient than Antp or poly-lysine-Antp (L-Antp) in gene delivery, and comparable or superior to a commercial liposome. The K-Antp-mediated plasmid DNA transfection not only exhibited temperature sensitivity, reflecting the involvement of an endocytosis-mediated gene transfer mechanism similar to other known PTDs, but also temperature insensitivity, suggesting the role of an energy-independent mechanism. Incorporation of an endosomolytic polymer polyethylenimine (PEI) into the system or treatment with chloroquine further increased the efficiency of K-Antp-mediated gene delivery. These results demonstrate the potential of the combinatorial use of KALA, Antp and PEI in the development of efficient PTD-derived gene carriers.

Simple preparation of nanoparticles coated with carbohydrate-carrying polymers

Nanoparticles bearing carbohydrate chains on the surface can be prepared by the simple diafiltration method. The nanoparticles prepared by the present method displayed high yield, no-aggregation formation, small size, narrow size distribution, and one-step procedure. Also, the high density carbohydrate chains on the particles can be recognized by liver cells.

In vitro characterization of the invasiveness of polymer microneedle against skin

The micro-sized needles could pierce the skin to deliver drugs effectively in a minimally invasive and painless manner. However, there are only a few reports that identify the invasiveness and painlessness of microneedle (MN), and in vitro characterization studies were conducted to examine the invasiveness of MN in experimental animals and healthy volunteers. First, a fluorescent molecule was applied to show the skin holes according to the application time of MN and then the whitening effect in UV-exposed hairless rats was observed using reflectance spectroscopy according to the application time of MN. The extent of skin irritation by the application time of MN in healthy volunteers was determined from the value of skin redness. Regardless of MN application time, skin redness occurred and then disappeared 30 min after removal of MN; this phenomenon was insignificant with the application time of MN. Thus, if the MN was applied, a skin hole appeared, skin redness was observed and then the skin redness disappeared 30 min after removal of MN. Taken together, polymer MN might be a suitable tool for safe transdermal drug delivery of small molecules.

2-Hydroxypropyl-β-cyclodextrin-modified SLN of paclitaxel for overcoming p-glycoprotein function in multidrug-resistant breast cancer cells.

Objectives  This study aimed to evaluate the potential of solid lipid nanoparticles (SLNs) of paclitaxel (PTX) modified with a 2‐hydroxypropyl‐β‐cyclodextrin system to enhance cellular accumulation of PTX into p‐glycoprotein (p‐gp)‐expressing cells.