Chi Chin Yap

A review of organic small molecule-based hole-transporting materials for meso-structured organic-inorganic perovskite solar cells

This review summarizes the current designs and development of new types of organic small molecules as a hole-transporting material (HTM) in a meso-structured perovskite solar cell (PSC). The roles of each layer in the meso-structured perovskite device architecture are elaborated and the employment of new types of organic HTMs in the device is compared with the commercially available HTM spiro-OMeTAD in terms of the properties, device performance and stability. The studies found that nearly half of the new synthesized and pristine HTMs have comparable or better photovoltaic properties than those of doped spiro-OMeTAD. These HTMs have the characteristics of a fused planar core structure with extended π-conjugated lengths and electron-donating functional groups, which are believed to contribute to their high intrinsic conductivity and help make them an alternative to spiro-OMeTAD as a better HTM in meso-structured PSCs. Some of the devices based on the new synthesized HTMs even have longer device lifetimes than their spiro-OMeTAD-based PSC counterparts. Moreover, studies found that the cost per gram (Cg) and cost-per-peak Watt (Cw) of synthesized HTMs can be reduced via minimizing the number of synthesis steps and by optimization of the starting materials in order to yield low-cost HTMs for meso-structured PSC applications.

ZnO nanocubes with (1 0 1) basal plane photocatalyst prepared via a low-frequency ultrasonic assisted hydrolysis process

The crystallographic plane of the ZnO nanocrystals photocatalyst is considered as a key parameter for an effective photocatalysis, photoelectrochemical reaction and photosensitivity. In this paper, we report a simple method for the synthesis of a new (101) high-energy plane bounded ZnO nanocubes photocatalyst directly on the FTO surface, using a seed-mediated ultrasonic assisted hydrolysis process. In the typical procedure, high-density nanocubes and quasi-nanocubes can be grown on the substrate surface from a solution containing equimolar (0.04 M) zinc nitrate hydrate and hexamine. ZnO nanocubes, with average edge-length of ca. 50 nm, can be obtained on the surface in as quickly as 10 min. The heterogeneous photocatalytic property of the sample has been examined in the photodegradation of methyl orange (MO) by UV light irradiation. It was found that the ZnO nanocubes exhibit excellent catalytic and photocatalytic properties and demonstrate the photodegradation efficiency as high as 5.7 percent/μg mW. This is 200 times higher than those reported results using a relatively low-powered polychromatic UV light source (4 mW). The mechanism of ZnO nanocube formation using the present approach is discussed. The new-synthesized ZnO nanocubes with a unique (101) basal plane also find potential application in photoelectrochemical devices and sensing.

Ag–ZnO Nanoreactor Grown on FTO Substrate Exhibiting High Heterogeneous Photocatalytic Efficiency

This Research Article reports an unusually high efficiency heterogeneous photodegradation of methyl orange (MO) in the presence of Ag nanoparticle-loaded ZnO quasi-nanotube or nanoreactor (A-ZNRs) nanocatalyst grown on FTO substrate. In typical process, photodegradation efficiency of as high as 21.6% per μg per Watts of used catalyst and UV power can be normally obtained within only a 60-min reaction time from this system, which is 10(3) order higher than the reported results. This is equivalent to the turnover frequency of 360 mol mol(-1) h(-1). High-density hexagonal A-ZNRs catalysts were grown directly on FTO substrate via a seed-mediated microwave-assisted hydrolysis growth process utilizing Ag nanoparticle of approximately 3 nm in size as nanoseed and mixture aqueous solution of Zn(NO3)·6H2O, hexamethylenetetramine (HMT), and AgNO3 as the growth solution. A-ZNRs adopts hexagonal cross-section morphology with the inner surface of the reactor characterized by a rough and rugged structure. Transmission electron microscopy imaging shows the Ag nanoparticle grows interstitially in the ZnO nanoreactor structure. The high photocatalytic property of the A-ZNRs is associated with the highly active of inner sides surface of A-ZNRs and the oxidizing effect of Ag nanoparticle. The growth mechanism as well as the mechanism of the enhanced-photocatalytic performance of the A-ZNRs will be discussed.

Solution-Processed Ga-Doped ZnO Nanorod Arrays as Electron Acceptors in Organic Solar Cells

This paper reports the utilization of ZnO nanorod arrays (NRAs) doped with various concentrations of Ga (0, 0.5, 1, 2, and 3 at %) as electron acceptors in organic solar cells. The donor, poly(3-hexylthiophene) (P3HT), was spin coated onto Ga-doped ZnO NRAs that were grown on fluorine-doped tin oxide (FTO) substrates, followed by the deposition of a Ag electrode by a magnetron sputtering method. Adjusting the Ga precursor concentration allowed for the control of the structural and optical properties of ZnO NRAs. The short circuit current density increased with increasing Ga concentration from 0 to 1 at %, mainly because of improved exciton dissociation and increased charge extraction. Meanwhile, the reduced charge recombination and lower hole leakage current led to an increase in the open circuit voltage with Ga concentrations up to 1 at %. The device with the optimum Ga concentration of 1 at % exhibited power conversion efficiency nearly three times higher compared to the device without Ga doping. This finding suggests that the incorporation of Ga can be a simple and effective approach to improve the photovoltaic performance of organic solar cells.

Controlled Defects of Fluorine-incorporated ZnO Nanorods for Photovoltaic Enhancement

Anion passivation effect on metal-oxide nano-architecture offers a highly controllable platform for improving charge selectivity and extraction, with direct relevance to their implementation in hybrid solar cells. In current work, we demonstrated the incorporation of fluorine (F) as an anion dopant to address the defect-rich nature of ZnO nanorods (ZNR) and improve the feasibility of its role as electron acceptor. The detailed morphology evolution and defect engineering on ZNR were studied as a function of F-doping concentration (x). Specifically, the rod-shaped arrays of ZnO were transformed into taper-shaped arrays at high x. A hypsochromic shift was observed in optical energy band gap due to the Burstein-Moss effect. A substantial suppression on intrinsic defects in ZnO lattice directly epitomized the novel role of fluorine as an oxygen defect quencher. The results show that 10-FZNR/P3HT device exhibited two-fold higher power conversion efficiency than the pristine ZNR/P3HT device, primarily due to the reduced Schottky defects and charge transfer barrier. Essentially, the reported findings yielded insights on the functions of fluorine on (i) surface –OH passivation, (ii) oxygen vacancies (Vo) occupation and (iii) lattice oxygen substitution, thereby enhancing the photo-physical processes, carrier mobility and concentration of FZNR based device.

Characterization of multilayer graphene prepared from short-time processed graphite oxide flake

Multilayer graphene has been prepared by thermal reduction of graphene oxide film. The graphite oxide flake was first synthesized by using modified Hummers method with a relatively small amount of oxidizing agent and short-time processing at ambient temperature. The graphite oxide flake was dispersed in deionized water and deposited on quartz substrates to form graphene oxide film. The red shift of absorption peak and decrease of interlayer distance as interpreted from the X-ray diffraction spectrum indicate the formation of multilayer graphene. The resultant multilayer graphene has been successfully used as counter electrode in FTO/ZnO nanorods/electrolyte/multilayer graphene dye sensitized solar cell.

Influence of TiO 2 nanoparticles on enhancement of optoelectronic properties of PFO-based light emitting diode

Improvement on optoelectronic properties of poly (9,9′-di-n-octylfluorenyl-2.7-diyl)- (PFO-) based light emitting diode upon incorporation of TiO2 nanoparticles (NPs) is demonstrated. The PFO/TiO2 nanocomposites with different weight ratios between 5 and 35wt.% were prepared using solution blending method before they were spin coated onto Indium Tin Oxide substrate. Then a thin Al layer was deposited onto the nanocomposite layer to act as top electrode. The nanocomposites were tested as emissive layer in organic light emitting diodes (OLEDs). The TiO2 NPs played the most crucial role in facilitating charge transport and electrical injection and thus improved device performance in terms of turn-on voltage, electroluminescence spectra (EL), luminance, and luminance efficiency. The best composition was OLED with 5 wt.% TiO2 NPs content having moderate surface roughness and well distribution of NPs. The device performance was reduced at higher TiO2 NPs content due to higher surface roughness and agglomeration of TiO2 NPs. This work demonstrated the importance of optimum TiO2 NPs content with uniform distribution and controlled surface roughness of the emissive layer for better device performance.

Enhancement of ZnO nanorod arrays-based inverted type hybrid organic solar cell using spin-coated Eosin-Y

This paper reports the effect of Eosin-Y coating concentration on the performance of inverted type hybrid organic solar cell based on ZnO nanorod arrays and poly(3-hexylthiophene-2,5-diyl) (P3HT). The Eosin-Y solution with concentrations of 0.05, 0.2, 2.0 and 5.0 mM was spin-coated onto the ZnO nanorod arrays grown on the fluorine-doped tin oxide glass substrate. The P3HT film was then spin-coated onto Eosin-Y-coated ZnO nanorod arrays, followed by deposition of silver (Ag) as anode using magnetron sputtering technique. The short circuit current density increased with the Eosin-Y coating concentration up to 0.2 mM, after which it started to decrease, mainly due to the aggregation of Eosin-Y which reduced the charge extraction from P3HT to ZnO. Meanwhile, the open circuit voltage increased with the Eosin-Y coating concentration, indicating reduced back charge recombination of electron on the ZnO and hole on the P3HT, as well as reduced leakage current through the direct contact between the ZnO nanorods and the Ag metal contact. The power conversion efficiency of the device with the optimum coating concentration was approximately eight times higher than that without Eosin-Y modification.

A Mini Review: Can Graphene Be a Novel Material for Perovskite Solar Cell Applications?

Perovskite solar cells (PSCs) have raised research interest in scientific community because their power conversion efficiency is comparable to that of traditional commercial solar cells (i.e., amorphous Si, GaAs, and CdTe). Apart from that, PSCs are lightweight, are flexible, and have low production costs. Recently, graphene has been used as a novel material for PSC applications due to its excellent optical, electrical, and mechanical properties. The hydrophobic nature of graphene surface can provide protection against air moisture from the surrounding medium, which can improve the lifetime of devices. Herein, we review recent developments in the use of graphene for PSC applications as a conductive electrode, carrier transporting material, and stabilizer material. By exploring the application of graphene in PSCs, a new class of strategies can be developed to improve the device performance and stability before it can be commercialized in the photovoltaic market in the near future.

Two-dimensional CdS intercalated ZnO nanorods: a concise study on interfacial band structure modification

The controllable growth of metal sulfide–metal oxide based nanomaterials with a tunable band gap structure is vital in the fabrication of new generation optoelectronic devices. In this paper, two-dimensional hierarchical CdS/ZnO nanorod arrays were successfully grown via a low temperature hydrothermal-SILAR method. A concise mechanism related to the surface and band gap modification on the CdS/ZnO nanorods was investigated under various CdS deposition cycles (N). The diameter and surface roughness properties of the sample were found to be linearly dependent on the value of N. A bathochromic shift in the optical energy band gap revealed the quantum size effects of the CdS/ZnO nanorods, as well as the induced interface band state and energy band split in the ZnO band state. An impressive improvement in the crystallinity of the sample was also observed under the CdS treatment. The correlation between the optical band gap and photovoltaic efficiency was evaluated. The results proved that the ZnO nanorod/CdS devices exhibited a threefold higher power conversion efficiency in comparison to a pristine ZnO nanorod device.