Chia-Hung Su

Hydrolysis of microalgae cell walls for production of reducing sugar and lipid extraction.

In this study, cell walls of microalgae were hydrolyzed for the production of reducing sugar by cellulase, which was immobilized onto an electrospun polyacrylonitrile (PAN) nanofibrous membrane. Since the nitrile groups of the PAN membrane were activated by the amidination reaction and covalent binding to the amino groups of the cellulase, electrospun PAN nanofibrous membranes with a high specific surface area were applied as supports for the immobilization. Under the optimal hydrolysis conditions, the immobilized cellulase performed its hydrolyzing conversion at 62%, and the hydrolysis yield remained at 40% after five times of reuse. Additionally, microalgal lipid extraction efficiency increased to around 56% from 32% dramatically after cell wall hydrolysis. These results demonstrate the efficacy and feasibility of the proposed applications in hydrolysis process followed with lipid extraction.

Effects of biomass weight and light intensity on the performance of photosynthetic microbial fuel cells with Spirulina platensis.

Microalgae Spirulina platensis were attached to the anode of a membrane-free and mediator-free microbial fuel cell (MFC) to produce electricity through the consumption of biochemical compounds inside the microalgae. An increase in open circuit voltage (OCV) was observed with decreasing light intensity and optimal biomass area density. The highest OCV observation for the MFC was 0.39 V in the dark with a biomass area density on the anode surface of 1.2 g cm(-2). Additionally, it was observed that the MFC with 0.75 g cm(-2) of biomass area density produced 1.64 mW m(-2) of electrical power in the dark, which is superior to the 0.132 mW m(-2) produced in the light. Which also means the MFC can be applied to generate electrical power under both day and night conditions.

Kinetic study of free fatty acid esterification reaction catalyzed by recoverable and reusable hydrochloric acid

The catalytic performance and recoverability of several homogeneous acid catalysts (hydrochloric, sulfuric, and nitric acids) for the esterification of enzyme-hydrolyzed free fatty acid (FFA) and methanol were studied. Although all tested catalysts drove the reaction to a high yield, hydrochloric acid was the only catalyst that could be considerably recovered and reused. The kinetics of the esterification reaction catalyzed by hydrochloric acid was investigated under varying catalyst loading (0.1-1M), reaction temperature (303-343K), and methanol/FFA molar ratio (1:1-20:1). In addition, a pseudo-homogeneous kinetic model incorporating the above factors was developed. A good agreement (r(2)=0.98) between the experimental and calculated data was obtained, thus proving the reliability of the model. Furthermore, the reusability of hydrochloric acid in FFA esterification can be predicted by the developed model. The recoverable hydrochloric acid achieved high yields of FFA esterification within five times of reuse.

Immobilization of cellulase onto electrospun polyacrylonitrile (PAN) nanofibrous membranes and its application to the reducing sugar production from microalgae

This study demonstrates a method to prepare an immobilized cellulase by using an electrospun polyacrylonitrile (PAN) nanofibrous membrane as the support. To obtain an immobilized cellulase with high hydrolytic activity, the immobilization conditions including activation time, enzyme concentration, immobilization time, and temperature were optimized. Under those conditions, the immobilized cellulase possessed a protein loading of 30 mg/g-support and a specific activity of 3.2U/mg-protein. After immobilization, the enzymatic stability of cellulase against pH and thermal stresses was improved. Fourier transform infrared spectroscopy (FTIR) measurements also revealed that the cellulase was covalently bonded to the supports. The immobilized cellulase was then used to hydrolyze cell wall of microalgae for the production of reducing sugars. Analyses using response surface methodology (RSM) show that the hydrolysis yield was affected by the reaction temperature, pH, and substrate/cellulase mass ratio, and a hydrolysis yield of 60.86% could be obtained at 47.85°C, pH 5.82, and a substrate/cellulase mass ratio of 40 g-substrate/g-cellulase. This result suggests that the proposed scheme for the cellulase immobilization has great potential for the application to the reducing sugar production.

Biopolymers Regulate Silver Nanoparticle under Microwave Irradiation for Effective Antibacterial and Antibiofilm Activities.

In the current study, facile synthesis of carboxymethyl cellulose (CMC) and sodium alginate capped silver nanoparticles (AgNPs) was examined using microwave radiation and aniline as a reducing agent. The biopolymer matrix embedded nanoparticles were synthesized under various experimental conditions using different concentrations of biopolymer (0.5, 1, 1.5, 2%), volumes of reducing agent (50, 100, 150 μL), and duration of heat treatment (30 s to 240 s). The synthesized nanoparticles were analyzed by scanning electron microscopy, UV-Vis spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy for identification of AgNPs synthesis, crystal nature, shape, size, and type of capping action. In addition, the significant antibacterial efficacy and antibiofilm activity of biopolymer capped AgNPs were demonstrated against different bacterial strains, Staphylococcus aureus MTCC 740 and Escherichia coli MTCC 9492. These results confirmed the potential for production of biopolymer capped AgNPs grown under microwave irradiation, which can be used for industrial and biomedical applications.

Estimation of fungal biomass and lipid production by morphological characteristics of Mucor rouxii.

This study presents methodology for estimating biomass and lipid production by Mucor rouxii via image analysis. Morphological variations in M. rouxii in relation to its biomass and lipid production were investigated using image analysis. Two parameters were used to characterize fungal morphology: fungal area per unit volume of the culture broth (A(f); cm(2)/ml) and fungal pellet circularity skewing (S(K)). These two parameters were correlated with both fungal biomass and lipid production and were used to develop an empirical model. This empirical model was further applied to estimate biomass yield and lipid production by M. rouxii under diverse culture conditions. Model predictions for fungal biomass and lipid production were in agreement with experimental results, indicating the reliability of image-based methodology. Thus, image-based methodology can be used to estimate fungal biomass and lipid production.

Surface immobilization of kanamycin-chitosan nanoparticles on polyurethane ureteral stents to prevent bacterial adhesion

Abstract Bacterial adhesion is a major problem that can lead to the infection of implanted urological stents. In this study, kanamycin-chitosan nanoparticles (KMCSNPs) were immobilized on the surface of a polyurethane ureteral stent (PUS) to prevent urinary bacterial infection. KMCSNPs were synthesized using the ionic gelation method. The synthesized KMCSNPs appeared spherical with a ζ-average particle size of 225 nm. KMCSNPs were immobilized on the PUS surface by covalent immobilization techniques. The surface-modified PUS was characterized using attenuated total reflectance Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The surface-modified PUS showed significantly increased antibacterial activity against Escherichia coli MTCC 729 and Proteus mirabilis MTCC 425 relative to the surface of an unmodified PUS. These findings suggest that the KMCSNP-immobilized PUS has the potential to prevent bacterial infection in the human urinary tract.

Separation and identification of bioactive peptides from stem of Tinospora cordifolia (Willd.) Miers

Enzyme hydrolysates (trypsin, papain, pepsin, α-chymotrypsin, and pepsin-pancreatin) of Tinospora cordifolia stem proteins were analyzed for antioxidant efficacy by measuring (1) 1,1-diphenyl-2-picrylhydrazyl (DPPH•) radical scavenging activity, (2) 2,20-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS+) radical scavenging capacity, and (3) Fe2+ chelation. Trypsin hydrolysate showed the strongest DPPH• scavenging, while α-chymotrypsin hydrolysate exhibited the highest ABTS+ scavenging and Fe2+ chelation. Undigested protein strongly inhibited the gastrointestinal enzymes, trypsin (50% inhibition at enzyme/substrate ratio = 1:6.9) and α-chymotrypsin (50% inhibition at enzyme/substrate ratio = 1:1.82), indicating the prolonged antioxidant effect after ingestion. Furthermore, gel filtration purified peptide fractions of papain hydrolysates exhibited a significantly higher ABTS+ and superoxide radical scavenging as compared to non-purified digests. Active fraction 9 showing the highest radical scavenging ability was further purified and confirmed by MALDI-TOF MS followed by MS/MS with probable dominant peptide sequences identified are VLYSTPVKMWEPGR, VITVVATAGSETMR, and HIGININSR. The obtained results revealed that free radical scavenging capacity of papain hydrolysates might be related to its consistently low molecular weight hydrophobic peptides.