Christian Kleeberg

A Facile Route to Aryl Boronates: Room-Temperature, Copper-Catalyzed Borylation of Aryl Halides with Alkoxy Diboron Reagents

A simple but effective copper-catalyzed borylation of aryl halides, including electron-rich and sterically hindered aryl bromides, with alkoxy diboron reagents occurs under mild conditions (see scheme). Preliminary DFT studies of the mechanism suggest that sigma-bond metathesis between a copper-boryl intermediate and the aryl halide generates the aryl boronate product.

Spectroscopic and Structural Characterization of the CyNHC Adduct of B2pin2 in Solution and in the Solid State

The Lewis base adduct of B(2)pin(2) and the NHC (1,3-bis(cyclohexyl)imidazol-2-ylidene), which was proposed to act as a source of nucleophilic boryl groups in the β-borylation of α,β-unsaturated ketones, has been isolated, and its solid state structure and solution behavior was studied. In solution, the binding is weak, and NMR spectroscopy reveals a rapid exchange of the NHC between the two boron centers. DFT calculations reveal that the exchange involves dissociation and reassociation of NHC rather than an intramolecular process.

Copper-mediated reduction of CO2 with pinB-SiMe2Ph via CO2 insertion into a copper-silicon bond

Reaction of [(IPr)Cu-OtBu] (1) with pinB-SiMe(2)Ph (2) leads to the Cu-silyl complex [(IPr)Cu-SiMe(2)Ph] (3). Insertion of CO(2) into the Cu-Si bond of 3 is followed by transformation of the resulting silanecarboxy complex [(IPr)Cu-O(2)CSiMe(2)Ph] (4) to the silanolate complex [(IPr)Cu-OSiMe(2)Ph] (5) via extrusion of CO. As 5 reacts readily with 2 to regenerate 3, a catalytic CO(2) reduction to CO is feasible. The individual steps were studied by in situ(13)C NMR spectroscopy of a series of stoichiometric reactions. Complexes 3, 4, and 5 were isolated and fully characterized, including single-crystal X-ray diffraction studies. Interestingly, the catalytic reduction of CO(2) using silylborane 2 as a stoichiometric reducing agent leads not only to CO and pinB-O-SiMe(2)Ph but also to PhMe(2)Si-CO(2)-SiMe(2)Ph as an additional reduction product.

Synthesis, Structure, and Reactivity of Anionic sp(2) -sp(3) Diboron Compounds: Readily Accessible Boryl Nucleophiles.

Lewis base adducts of tetra-alkoxy diboron compounds, in particular bis(pinacolato)diboron (B2 pin2 ), have been proposed as the active source of nucleophilic boryl species in metal-free borylation reactions. We report the isolation and detailed structural characterization (by solid-state and solution NMR spectroscopy and X-ray crystallography) of a series of anionic adducts of B2 pin2 with hard Lewis bases, such as alkoxides and fluoride. The study was extended to alternative Lewis bases, such as acetate, and other diboron reagents. The B(sp(2) )-B(sp(3) ) adducts exhibit two distinct boron environments in the solid-state and solution NMR spectra, except for [(4-tBuC6 H4 O)B2 pin2 ](-) , which shows rapid site exchange in solution. DFT calculations were performed to analyze the stability of the adducts with respect to dissociation. Stoichiometric reaction of the isolated adducts with two representative series of organic electrophiles-namely, aryl halides and diazonium salts-demonstrate the relative reactivities of the anionic diboron compounds as nucleophilic boryl anion sources.

Ir-Catalyzed Direct Borylation at the 4-Position of Pyrene

The first direct borylation of a C-H bond at the 4-position of pyrene was achieved using [Ir(COD)Cl](2)/dtbpy as the catalyst precursor and B(2)pin(2) as the boron source. The position-related photophysical properties of pyrene derivatives are reported.

Palladium(II) complexes of unsymmetrical CNN pincer ligands.

Unsymmetrical 1-(arylimino)-3-(2-hetarylimino)isoindolines have been prepared from 1,3-diiminoisoindoline, an arylamine (aniline, 2-methylaniline, 2-iodoaniline), and a heteroaromatic amine (2-amino-6-methylpyridine, 2-amino-4-methylthiazole) in a stepwise manner by two consecutive condensations. The metalation reactions of these compounds with palladium(II) acetate proceed upon cyclopalladation of the carbocyclic aryl moieties and yield unsymmetrical C, N, N pincer complexes in all cases. X-ray crystallographic analysis were performed on single crystals of hydrogen{acetato[1-phenylimino-3-(6-methylpyridylimino)isoindolinato]palladate(II)} H[(phpi)Pd(OAc)] and pyridine[1-(2-tolylimino)-3-(4-methylthiazolylimino)isoindolinato]palladium(II) [(2-tolti)Pd(py)] by which the coordination mode, the conformation, the protonation site, and the trans influence of the carbon donor were established. For one more C, N, N pincer complex, hydrogen{acetato[1-(2-iodophenylimino)-3-(6-methylpyridylimino)isoindolinato]palladate(II)} H[(2-Iphpi)Pd(OAc)], a similar mononuclear coordination mode was confirmed by (1)H NMR spectroscopy, whereas for the product of an oxidative addition reaction of a palladium(0) precursor to the iodoaryl derivative a product with exo coordination was found. First experiments showed the effectivity of one of these complexes as a precatalyst in CC coupling reactions (Heck and Stille coupling).

Cyclometalation vs. Werner-type coordination of sterically enforced palladium(II)-1,3-bis(pyridyl-2-imino)isoindolines (Pd-BPIs)

The reaction of 1,3-bis(4,6-dimethylpyridyl-2-imino)isoindoline and palladium acetate in methanol selectively yields the expected acetato palladium N,N,N-chelate or a cyclometalated tetranuclear dimer depending on the stoichiometry of the reactants.

Reactions of Copper(II) Chloride in Solution: Facile Formation of Tetranuclear Copper Clusters and Other Complexes That Are Relevant in Catalytic Redox Processes

Mixing CuCl2⋅2 H2O with benzylamine in alcoholic solutions led to an extremely colorful chemistry caused by the formation of a large number of different complexes. Many of these different species could be structurally characterized. These include relatively simple compounds such as [Cu(L(1))4Cl2] (L(1) = benzylamine) and (HL(1))2[CuCl4]. Most interestingly is the easy formation of two cluster complexes, one based on two cluster units Cu4OCl6(L(1))4 connected through one [Cu(L(1))2Cl2] complex and one based on a cubane-type cluster ([Cu4O4](C11H14)4Cl4). Both clusters proved to be highly reactive in a series of oxidation reactions of organic substrates by using air or peroxides as oxidants. Furthermore, it was possible to isolate and structurally characterize ([Cu(L(1))Cl]3 and [Cu(benz2mpa)2]CuCl2 (benz2mpa = benzyl-(2-benzylimino-1-methyl-propylidene)-amine), two copper(I) complexes that formed in solution, demonstrating the high redox activity of the cluster systems. In addition, it was possible to solve the molecular structures of the compounds Cu4OCl6(MeOH)4, [Cu(MeOH)2Cl2], [Cu(aniline)2Cl2], and an organic side product (HC13 H19 NOCl). In fact all determined structures are of a known type but the chemical relation between these compounds could be explained for the first time. The paper describes these different compounds and their chemical equilibria. Some of these complexes seem to be relevant in catalytic oxidation reactions and their reactivity is discussed in more detail.

Iron 10‐Thiacorroles: Bioinspired Iron(III) Complexes with an Intermediate Spin (S=3/2) Ground State

A first systematic study upon the preparation and exploration of a series of iron 10-thiacorroles with simple halogenido (F, Cl, Br, I), pseudo-halogenido (N3 , I3 ) and solvent-derived axial ligands (DMSO, pyridine) is reported. The compounds were prepared from the free-base octaethyl-10-thiacorrole by iron insertion and subsequent ligand-exchange reactions. The small N4 cavity of the ring-contracted porphyrinoid results in an intermediate spin (i.s., S=3/2) state as the ground state for the iron(III) ion. In most of the investigated cases, the i.s. state is found unperturbed and independent of temperature, as determined by a combination of X-ray crystallography and magnetometry with (1) H NMR-, EPR-, and Mössbauer spectroscopy. Two exceptions were found. The fluorido iron(III) complex is inhomogenous in the solid and contains a thermal i.s. (S=3/2)→high spin (h.s., S=5/2) crossover fraction. On the other side, the cationic bis(pyridine) complex resides in the expected low spin (l.s., S=1/2) state. Chemically, the iron 10-thiacorroles differ from the iron porphyrins mainly by weaker axial ligand binding and by a cathodic shift of the redox potentials. These features make the 10-thiacorroles interesting ligands for future research on biomimetic catalysts and model systems for unusual heme protein active sites.

N-Heterocyclic Carbene Stabilized Boryl Radicals

The reaction of the 2-(trimethylsilyl)imidazolium triflate 9 with diarylboron halides (4-R-C6 H4 )2 BX (R=H, X=Br; R=CH3 , X=Cl; R=CF3 , X=Cl) afforded the NHC-stabilized borenium cations 10 a-c. Cyclic voltammetry revealed a linear correlation between the Hammett parameter σp of the para substituent and the half-wave potential. Chemical reduction with decamethylcobaltocene, [(C5 Me5 )2 Co], furnished the corresponding radicals 11 a-c; their characterization by EPR spectroscopy confirmed the paramagnetic character of 11 a-c, with large hyperfine coupling constants to the boron isotopes 11 B and 10 B, while delocalization of the unpaired electron into the NHC is negligible. DFT calculations of the percentage of spin density distribution between the carbene (NHC) and the boryl fragments (BR2 ) revealed for 11 a-c a spin density ratio (BR2 /NHC) of ca. 9:1, which underlines their distinct boryl radical character. The molecular structure of the most stable species 11 c was established by X-ray diffraction analysis.