Martin Bröring

Synthesis, photophysical, electrochemical, and electrogenerated chemiluminescence studies. Multiple sequential electron transfers in BODIPY monomers, dimers, trimers, and polymer.

Synthesis of the C(8) BODIPY monomers, dimers, and trimers, a C(8) polymer, and N(8) aza-BODIPY monomer and dimer was carried out. Methyl and mesityl C(8)-substituted monomers, dimers, and trimers were used. Dimers, trimers, and polymer were formed chemically through the β-β (2/6) positions by oxidative coupling using FeCl(3). A red shift of the absorbance and fluorescence is observed with addition of monomer units from monomer to polymer for C(8) dyes. The aza-BODIPY dye shows red-shifted absorbance and fluorescence compared with the C(8) analogue. Cyclic voltammetry shows one, two, and three one-electron waves on both reduction and oxidation for the monomer, dimer, and trimer, respectively, for the C(8) BODIPYs. The separation for the reduction peaks for the C(8) dimers is 0.12 V compared with 0.22 V for the oxidation, while the trimers show separations of 0.09 V between reduction peaks and 0.13 V for oxidation peaks. The larger separations between the second and third peaks, 0.25 V for the oxidation and 0.2 V for the reduction, are consistent with a larger energy to remove or add a third electron compared with the second one. The BODIPY polymer shows the presence of many sequential one-electron waves with a small separation. These results provide evidence for significant electronic interactions between different monomer units. The aza-BODIPY dye shows a reduction peak 0.8 V more positive compared to the C(8) compound. Aza-BODIPY dimer shows the appearance of four waves in dichloromethane. The separation between two consecutive waves is around 0.12 V for reduction compared with 0.2 V for oxidation, which is comparable with the results for the C(8) dyes. Electrogenerated chemiluminescence (ECL) of the different species was obtained, including weak ECL of the polymer.

Bis(BF2)-2,2′-bidipyrrins, a class of BODIPY dyes with new spectroscopic and photophysical properties

The photophysical and spectroscopic characterization of four new dimeric bis(BF2)-2,2′-bidipyrrins (BisBODIPYs) recently synthesized and characterized (Chem. Eur. J., 2008, 14, 2976–2983) has been undertaken along with that of the component BODIPY monomers. The monomers display the typical photophysical properties of this family; (i) narrow and intense single absorption band in the visible range at 530 nm; (ii) intense, solvent independent emission (Φflca. 1); (iii) narrow emission band with a 200–400 cm−1 Stokes shifted emission, independent of solvent polarity; (iv) no absorption features for the singlet excited state; (v) very little triplet yield and no ability to sensitize singlet oxygen. The absorption spectra of the corresponding new dimers exhibit split band maxima in the visible range at about 490 and 560 nm, corresponding to an exciton splitting of ca. 2600 cm−1. The luminescence in toluene is strong (Φflca. 0.7, τ =3.4 ns), broad and Stokes shifted by ca. 2200 cm−1, but both luminescence yield and Stokes shift are solvent polarity dependent; Φfl < 0.1, τ < 1 ns and the Stokes shift is close to 2700 cm−1 in acetonitrile. Solvent viscosity does not appear to play an important role and freezing of the solvents to 77 K in a solid matrix cancels the differences in luminescence parameters. Singlet and triplet excited state absorbance was measured in toluene and acetonitrile and the ability of these new dyes to sensitize singlet oxygen was examined. The nature and dynamics of the excited state is discussed in comparison with the monomers properties and with some intra- or inter-molecular BODIPY dimers reported in the literature. Potential applications of these new dyes with respect to BODIPYs are pointed out on the basis of their spectroscopic and photophysical properties.

The first PdII complex of a non-heteroatom stabilised carbene ligand

Di(p-tolyl)diazomethane reacts with the tripyrrinate TrpyPdOAc(F) 1 after activation with NaBAr(F) to yield the first stable Pd(II) complex 2 of a non-Arduengo type carbene ligand, which could be characterised by X-ray crystallography.

Dynamics of molecular self-ordering in tetraphenyl porphyrin monolayers on metallic substrates

A molecular model system of tetraphenyl porphyrins (TPP) adsorbed on metallic substrates is systematically investigated within a joint scanning tunnelling microscopy/molecular modelling approach. The molecular conformation of TPP molecules, their adsorption on a gold surface and the growth of highly ordered TPP islands are modelled with a combination of density functional theory and dynamic force field methods. The results indicate a subtle interplay between different contributions. The molecule-substrate interaction causes a bending of the porphyrin core which also determines the relative orientations of phenyl legs attached to the core. A major consequence of this is a characteristic (and energetically most favourable) arrangement of molecules within self-assembled molecular clusters; the phenyl legs of adjacent molecules are not aligned parallel to each other (often denoted as pi-pi stacking) but perpendicularly in a T-shaped arrangement. The results of the simulations are fully consistent with the scanning tunnelling microscopy observations, in terms of the symmetries of individual molecules, orientation and relative alignment of molecules in the self-assembled clusters.

Sulfur-bridged BODIPY DYEmers.

Reactions of BODIPY monomers with sulfur nucleophiles and electrophiles result in the formation of new BODIPY dimers. Mono- and disulfur bridges are established, and the new dyestuff molecules were studied with respect to their structural, optical, and electrochemical properties. X-ray diffraction analyses reveal individual angulated orientations of the BODIPY subunits in all cases. DFT calculations provide solution conformers of the DYEmers which deviate in a specific manner from the crystallographic results. Clear exciton-like splittings are observed in the absorption spectra, with maxima at up to 628 nm, in combination with the expected weak fluorescence in polar solvents. A strong communication between the BODIPY subunits was detected by cyclic voltammetry, where two separated one-electron oxidation and reduction waves with peak-to-peak potential differences of 120-400 mV are observed. The qualitative applicability of the exciton model by Kasha for the interpretation of the absorption spectral shape with respect to the conformational state, subunit orientation and distance, and conjugation through the different sulfur bridges, is discussed in detail for the new BODIPY derivatives. This work is part of our concept of DYEmers, where the covalent oligomerisation of BODIPY-type dye molecules with close distances is leading to new functional dyes with predictable properties.

Conjugated BODIPY DYEmers by Metathesis Reactions

Boron dipyrrin (BODIPY) DYEmers bridged by conjugating ethynylene and ethenylene moieties can be prepared through metal-promoted metathesis reactions. Alkyne metathesis was advantageous over alkene metathesis and Stille coupling for BODIPY substrates, but also showed specific restrictions with respect to steric encumbrance and regioselectivity. All derivatives with unhindered rotations along the bridges reside in a coplanar minimum conformation. For a hindered β-ethenylene-bridged DYEmer, the shifts in the (1) H NMR spectrum indicate a significant loss of coplanarity and conjugation. The electronic interactions of the BODIPY subchromophores, visualized by optical spectra and cyclic voltammograms, deviate significantly from those found for nonconjugated and excitonically coupled DYEmers. The observed properties can be rationalized in each case by the respective strength of conjugation through the α or β position, the degree of coplanarity, and conformational dynamics.

The Corrole Radical

The reaction of 5,10,15-trimesitylcorrole (H3 cor) with tungsten hexachloride and tungsten hexacarbonyl resulted in the unexpected formation of the 3,17-dichloro-5,10,15-trimesitylcorrole radical (H2 cor*) as an air-stable product. X-ray crystallography proved the planarization of the corrole radical structure, which was rationalized by the reduced steric hindrance of two versus three hydrogen atoms inside the N4 cavity. Although the aromaticity was lost, no specific changes in C-C or C-N bond distances could be observed. The regioselectivity of the two-fold chlorination is the result of the nucleophilic attack of chloride ions to an oxidized corrole macrocycle, and is supported by DFT results. The corrole radical acts as a dianionic ligand and allows the insertion of the divalent zinc(II) cation, which usually does not form neutral corrole complexes.

Molecular and Electronic Structure of (2,2′‐Bidipyrrinato)nickel(II) Complexes

Nickel complexes of eight differently substituted 2,2′-bidipyrrins have been prepared and fully characterized. The X-ray analyses of three of these complexes revealed helical chiral molecules. Despite the tetrahedral deviation from the square-planar coordination geometry at the metal centres, all compounds were found to be diamagnetic in nature. For (3,3′,4,4′,8,8′,9,9′-octaethyl-10,10′-dimethyl-6,6′-diphenyl2,2′-bidipyrrinato)nickel, a separation into the enantiomers by chiral MPLC could be achieved, and the first CD spectra of enantiomerically pure tetrapyrrole helicates are reported. An electrochemical study of the new complexes allowed a first insight into the electronic structure of (2,2′-bidipyrrinato)nickel(II), disclosing a rather high energy HOMO and metal−ligand interaction similar to that observed in metalloporphyrins.

Circularly Polarized Luminescence from Axially Chiral BODIPY DYEmers: An Experimental and Computational Study

With our new home-built circularly polarized luminescence (CPL) instrument, we measured fluorescence and CPL spectra of the enantiomeric pairs of two quasi-isomeric BODIPY DYEmers 1 and 2, endowed with axial chirality. The electronic circular dichroism (ECD) and CPL spectra of these atropisomeric dimers are dominated by the exciton coupling between the main π-π* transitions (550-560 nm) of the two BODIPY rings. Compound 1 has strong ECD and CPL spectra (glum =4×10-3 ) well reproduced by TD-DFT and SCS-CC2 (spin-component scaled second-order approximate coupled-cluster) calculations using DFT-optimized ground- and excited-state structures. Compound 2 has weaker ECD and CPL spectra (glum =4×10-4 ), partly due to the mutual cancellation of electric-electric and electric-magnetic exciton couplings, and partly to its conformational freedom. This compound is computationally very challenging. Starting from the optimized excited-state geometries, we predicted the wrong sign for the CPL band of 2 using TD-DFT with the most recommended hybrid and range-separated functionals, whereas SCS-CC2 or a DFT functional with full exact exchange provided the correct sign.

A Functional Model of Cytochrome c Oxidase: Thermodynamic Implications

The environment of the CuI ion in the distal ligand group decides the fate of the reduction of O2 by the two analogues 1 and 2 of the heme a3  CuB center in cytochrome c oxidase. The fourfold coordination by N in 1 favors the CuII oxidation state and leads to a 4 e- -4 H+ reduction and the formation of H2 O under physiological conditions, while with 2 a 2 e- -2 H+ reduction occurs to form the cytotoxic H2 O2 .