Christina L. Vizcarra

Computationally designed libraries of fluorescent proteins evaluated by preservation and diversity of function

To determine which of seven library design algorithms best introduces new protein function without destroying it altogether, seven combinatorial libraries of green fluorescent protein variants were designed and synthesized. Each was evaluated by distributions of emission intensity and color compiled from measurements made in vivo. Additional comparisons were made with a library constructed by error-prone PCR. Among the designed libraries, fluorescent function was preserved for the greatest fraction of samples in a library designed by using a structure-based computational method developed and described here. A trend was observed toward greater diversity of color in designed libraries that better preserved fluorescence. Contrary to trends observed among libraries constructed by error-prone PCR, preservation of function was observed to increase with a librarys average mutation level among the four libraries designed with structure-based computational methods.

Comparison of random mutagenesis and semi-rational designed libraries for improved cytochrome P450 BM3-catalyzed hydroxylation of small alkanes

Three semi-rational approaches, combinatorial site-saturation mutagenesis (CSSM) using a reduced amino acid set and two libraries based on C(orbit) and CRAM computational design algorithms targeting up to 10 active site residues, were used to engineer cytochrome P450 BM3 to demethylate dimethyl ether and hydroxylate propane and ethane. These small libraries (343-1028 variants) were all enriched with respect to the fraction functional and maximal activities compared with a random mutagenesis library and individual site-saturation libraries targeting the same residues. Despite high average amino acid substitution levels of 2.6, 5 and 7.5, the CSSM, C(orbit) and CRAM libraries had at least 75% of library members properly folded. Propane- and ethane-hydroxylating P450 BM3 variants were identified using all three mutagenesis approaches, with as few as two amino acid substitutions. The library designed using the CRAM algorithm, which sought to reduce the size of the binding pocket, produced both a higher number of active variants and variants supporting the greatest number of catalytic turnovers. The most active variant E32 supports 16 800 propane turnovers at 36% coupling, which rivals the activity of variants obtained after 10-12 rounds of directed evolution using random and site-saturation mutagenesis. None of the variants in this study achieved the complete re-specialization for propane hydroxylation (including 93% coupling) previously obtained via multiple rounds of mutagenesis and screening. However, these semi-rational approaches allowed for large jumps in sequence space to variants with the desired functions.

Structure and function of the interacting domains of Spire and Fmn-family formins

Evidence for cooperation between actin nucleators is growing. The WH2-containing nucleator Spire and the formin Cappuccino interact directly, and both are essential for assembly of an actin mesh during Drosophila oogenesis. Their interaction requires the kinase noncatalytic C-lobe domain (KIND) domain of Spire and the C-terminal tail of the formin. Here we describe the crystal structure of the KIND domain of human Spir1 alone and in complex with the tail of Fmn2, a mammalian ortholog of Cappuccino. The KIND domain is structurally similar to the C-lobe of protein kinases. The Fmn2 tail is coordinated in an acidic cleft at the base of the domain that appears to have evolved via deletion of a helix from the canonical kinase fold. Our functional analysis of Cappuccino reveals an unexpected requirement for its tail in actin assembly. In addition, we find that the KIND/tail interaction blocks nucleation by Cappuccino and promotes its displacement from filament barbed ends providing insight into possible modes of cooperation between Spire and Cappuccino.

One‐ and two‐body decomposable Poisson‐Boltzmann methods for protein design calculations

Successfully modeling electrostatic interactions is one of the key factors required for the computational design of proteins with desired physical, chemical, and biological properties. In this paper, we present formulations of the finite difference Poisson‐Boltzmann (FDPB) model that are pairwise decomposable by side chain. These methods use reduced representations of the protein structure based on the backbone and one or two side chains in order to approximate the dielectric environment in and around the protein. For the desolvation of polar side chains, the two‐body model has a 0.64 kcal/mol RMSD compared to FDPB calculations performed using the full representation of the protein structure. Screened Coulombic interaction energies between side chains are approximated with an RMSD of 0.13 kcal/mol. The methods presented here are compatible with the computational demands of protein design calculations and produce energies that are very similar to the results of traditional FDPB calculations.

An improved pairwise decomposable finite-difference Poisson–Boltzmann method for computational protein design

Our goal is to develop accurate electrostatic models that can be implemented in current computational protein design protocols. To this end, we improve upon a previously reported pairwise decomposable, finite difference Poisson–Boltzmann (FDPB) model for protein design (Marshall et al., Protein Sci 2005, 14, 1293). The improvement involves placing generic sidechains at positions with unknown amino acid identity and explicitly capturing two‐body perturbations to the dielectric environment. We compare the original and improved FDPB methods to standard FDPB calculations in which the dielectric environment is completely determined by protein atoms. The generic sidechain approach yields a two to threefold increase in accuracy per residue or residue pair over the original pairwise FDPB implementation, with no additional computational cost. Distance dependent dielectric and solvent‐exclusion models were also compared with standard FDPB energies. The accuracy of the new pairwise FDPB method is shown to be superior to these models, even after reparameterization of the solvent‐exclusion model.

Autoinhibition of the formin Cappuccino in the absence of canonical autoinhibitory domains

Formins are a conserved family of proteins known to enhance actin polymerization. Most formins are regulated by an intramolecular interaction. The Drosophila formin, Cappuccino (Capu), was believed to be an exception. Capu does not contain conserved autoinhibitory domains and can be regulated by a second protein, Spire. We report here that Capu is, in fact, autoinhibited. The N-terminal half of Capu (Capu-NT) potently inhibits nucleation and binding to the barbed end of elongating filaments by the C-terminal half of Capu (Capu-CT). Hydrodynamic analysis indicates that Capu-NT is a dimer, similar to the N-termini of other formins. These data, combined with those from circular dichroism, suggest, however, that it is structurally distinct from previously described formin inhibitory domains. Finally, we find that Capu-NT binds to a site within Capu-CT that overlaps with the Spire-binding site, the Capu-tail. We propose models for the interaction between Spire and Capu in light of the fact that Capu can be regulated by autoinhibition.

The role of formin tails in actin nucleation, processive elongation, and filament bundling.

Background: Formins build essential actin-based structures. Results: The tails of Cappuccino and other formins contribute to both nucleation and processive filament elongation by binding actin monomers and filaments, respectively. Conclusion: Formin tails tune actin assembly. Their role in processivity was not previously recognized. Significance: Identifying the functions of the tail domain will lead to an understanding of how Capu and other formins function and are regulated. Formins are multidomain proteins that assemble actin in a wide variety of biological processes. They both nucleate and remain processively associated with growing filaments, in some cases accelerating filament growth. The well conserved formin homology 1 and 2 domains were originally thought to be solely responsible for these activities. Recently a role in nucleation was identified for the Diaphanous autoinhibitory domain (DAD), which is C-terminal to the formin homology 2 domain. The C-terminal tail of the Drosophila formin Cappuccino (Capu) is conserved among FMN formins but distinct from other formins. It does not have a DAD domain. Nevertheless, we find that Capu-tail plays a role in filament nucleation similar to that described for mDia1 and other formins. Building on this, replacement of Capu-tail with DADs from other formins tunes nucleation activity. Capu-tail has low-affinity interactions with both actin monomers and filaments. Removal of the tail reduces actin filament binding and bundling. Furthermore, when the tail is removed, we find that processivity is compromised. Despite decreased processivity, the elongation rate of filaments is unchanged. Again, replacement of Capu-tail with DADs from other formins tunes the processive association with the barbed end, indicating that this is a general role for formin tails. Our data show a role for the Capu-tail domain in assembling the actin cytoskeleton, largely mediated by electrostatic interactions. Because of its multifunctionality, the formin tail is a candidate for regulation by other proteins during cytoskeletal rearrangements.

Interaction between Microtubules and the Drosophila Formin Cappuccino and Its Effect on Actin Assembly

Background: Cappuccino is a formin actin nucleator that regulates cytoskeletal organization during Drosophila oogenesis. Results: Cappuccino binds microtubules through two domains and cannot nucleate actin filaments when bound to microtubules. Conclusion: Actin filament assembly and microtubule binding are mutually exclusive activities of Cappuccino. Significance: We provide mechanistic insight into the role of formins as coordinators of the actin and microtubule cytoskeletons. Formin family actin nucleators are potential coordinators of the actin and microtubule cytoskeletons, as they can both nucleate actin filaments and bind microtubules in vitro. To gain a more detailed mechanistic understanding of formin-microtubule interactions and formin-mediated actin-microtubule cross-talk, we studied microtubule binding by Cappuccino (Capu), a formin involved in regulating actin and microtubule organization during Drosophila oogenesis. We found that two distinct domains within Capu, FH2 and tail, work together to promote high-affinity microtubule binding. The tail domain appears to bind microtubules through nonspecific charge-based interactions. In contrast, distinct residues within the FH2 domain are important for microtubule binding. We also report the first visualization of a formin polymerizing actin filaments in the presence of microtubules. Interestingly, microtubules are potent inhibitors of the actin nucleation activity of Capu but appear to have little effect on Capu once it is bound to the barbed end of an elongating filament. Because Capu does not simultaneously bind microtubules and assemble actin filaments in vitro, its actin assembly and microtubule binding activities likely require spatial and/or temporal regulation within the Drosophila oocyte.

Metavinculin Tunes the Flexibility and the Architecture of Vinculin-Induced Bundles of Actin Filaments.

Vinculin is an abundant protein found at cell-cell and cell-extracellular matrix junctions. In muscles, a longer splice isoform of vinculin, metavinculin, is also expressed. The metavinculin-specific insert is part of the C-terminal tail domain, the actin-binding site of both isoforms. Mutations in the metavinculin-specific insert are linked to heart disease such as dilated cardiomyopathies. Vinculin tail domain (VT) both binds and bundles actin filaments. Metavinculin tail domain (MVT) binds actin filaments in a similar orientation but does not bundle filaments. Recently, MVT was reported to sever actin filaments. In this work, we asked how MVT influences F-actin alone or in combination with VT. Cosedimentation and limited proteolysis experiments indicated a similar actin binding affinity and mode for both VT and MVT. In real-time total internal reflection fluorescence microscopy experiments, MVTs severing activity was negligible. Instead, we found that MVT binding caused a 2-fold reduction in F-actins bending persistence length and increased susceptibility to breakage. Using mutagenesis and site-directed labeling with fluorescence probes, we determined that MVT alters actin interprotomer contacts and dynamics, which presumably reflect the observed changes in bending persistence length. Finally, we found that MVT decreases the density and thickness of actin filament bundles generated by VT. Altogether, our data suggest that MVT alters actin filament flexibility and tunes filament organization in the presence of VT. Both of these activities are potentially important for muscle cell function. Perhaps MVT allows the load of muscle contraction to act as a signal to reorganize actin filaments.

Structure of a putative ClpS N-end rule adaptor protein from the malaria pathogen Plasmodium falciparum.

The N‐end rule pathway uses an evolutionarily conserved mechanism in bacteria and eukaryotes that marks proteins for degradation by ATP‐dependent chaperones and proteases such as the Clp chaperones and proteases. Specific N‐terminal amino acids (N‐degrons) are sufficient to target substrates for degradation. In bacteria, the ClpS adaptor binds and delivers N‐end rule substrates for their degradation upon association with the ClpA/P chaperone/protease. Here, we report the first crystal structure, solved at 2.7 Å resolution, of a eukaryotic homolog of bacterial ClpS from the malaria apicomplexan parasite Plasmodium falciparum (Pfal). Despite limited sequence identity, Plasmodium ClpS is very similar to bacterial ClpS. Akin to its bacterial orthologs, plasmodial ClpS harbors a preformed hydrophobic pocket whose geometry and chemical properties are compatible with the binding of N‐degrons. However, while the N‐degron binding pocket in bacterial ClpS structures is open and accessible, the corresponding pocket in Plasmodium ClpS is occluded by a conserved surface loop that acts as a latch. Despite the closed conformation observed in the crystal, we show that, in solution, Pfal‐ClpS binds and discriminates peptides mimicking bona fide N‐end rule substrates. The presence of an apicoplast targeting peptide suggests that Pfal‐ClpS localizes to this plastid‐like organelle characteristic of all Apicomplexa and hosting most of its Clp machinery. By analogy with the related ClpS1 from plant chloroplasts and cyanobacteria, Plasmodium ClpS likely functions in association with ClpC in the apicoplast. Our findings open new venues for the design of novel anti‐malarial drugs aimed at disrupting parasite‐specific protein quality control pathways.