Christine Rochange

Merasa: Multicore Execution of Hard Real-Time Applications Supporting Analyzability

The Merasa project aims to achieve a breakthrough in hardware design, hard real-time support in system software, and worst-case execution time analysis tools for embedded multicore processors. The project focuses on developing multicore processor designs for hard real-time embedded systems and techniques to guarantee the analyzability and timing predictability of every feature provided by the processor.

OTAWA: an open toolbox for adaptive WCET analysis

The analysis of worst-case execution times has become mandatory in the design of hard real-time systems: it is absolutely necessary to know an upper bound of the execution time of each task to determine a task schedule that insures that deadlines will all be met.The OTAWA toolbox presented in this paper has been designed to host algorithms resulting from research in the domain of WCET analysis so that they can be combined to compute tight WCET estimates. It features an abstraction layer that decouples the analyses from the target hardware and from the instruction set architecture, as well as a set of functionalities that facilitate the implementation of new approaches.

Building timing predictable embedded systems

A large class of embedded systems is distinguished from general-purpose computing systems by the need to satisfy strict requirements on timing, often under constraints on available resources. Predictable system design is concerned with the challenge of building systems for which timing requirements can be guaranteed a priori. Perhaps paradoxically, this problem has become more difficult by the introduction of performance-enhancing architectural elements, such as caches, pipelines, and multithreading, which introduce a large degree of uncertainty and make guarantees harder to provide. The intention of this article is to summarize the current state of the art in research concerning how to build predictable yet performant systems. We suggest precise definitions for the concept of “predictability”, and present predictability concerns at different abstraction levels in embedded system design. First, we consider timing predictability of processor instruction sets. Thereafter, we consider how programming languages can be equipped with predictable timing semantics, covering both a language-based approach using the synchronous programming paradigm, as well as an environment that provides timing semantics for a mainstream programming language (in this case C). We present techniques for achieving timing predictability on multicores. Finally, we discuss how to handle predictability at the level of networked embedded systems where randomly occurring errors must be considered.

parMERASA -- Multi-core Execution of Parallelised Hard Real-Time Applications Supporting Analysability

Engineers who design hard real-time embedded systems express a need for several times the performance available today while keeping safety as major criterion. A breakthrough in performance is expected by parallelizing hard real-time applications and running them on an embedded multi-core processor, which enables combining the requirements for high-performance with timing-predictable execution. parMERASA will provide a timing analyzable system of parallel hard real-time applications running on a scalable multicore processor. parMERASA goes one step beyond mixed criticality demands: It targets future complex control algorithms by parallelizing hard real-time programs to run on predictable multi-/many-core processors. We aim to achieve a breakthrough in techniques for parallelization of industrial hard real-time programs, provide hard real-time support in system software, WCET analysis and verification tools for multi-cores, and techniques for predictable multi-core designs with up to 64 cores.

A Context-Parameterized Model for Static Analysis of Execution Times

The static analysis of the execution time of a program (i.e. the evaluation of this time for any input data set) can be useful for the purpose of optimizing the code or verifying that strict real-time deadlines can be met. This analysis generally goes through determining the execution times of partial execution paths, typically basic blocks. Now, as soon as the target processor architecture features a superscalar pipeline, possibly with dynamic instruction scheduling, the execution time of a basic block highly depends on the pipeline state, that is on the instructions executed before it. In this paper, we propose a model to specify the local execution context of a basic block as a set of parameters. The execution time of the block can then be computed as a function of these parameters. We show how this model can be used to determine an upper bound of the execution time of a basic block, that can be used for computing the Worst-Case Execution Time of the program. Experimental results give an insight into the tightness of the estimations.

RTOS Support for Parallel Execution of Hard Real-Time Applications on the MERASA Multi-core Processor

Multi-cores are the contemporary solution to satisfy high performance and low energy demands in general and embedded computing domains. However, currently available multi-cores are not feasible to be used in safety-critical environments with hard real-time constraints. Hard real-time tasks running on different cores must be executed in isolation or their interferences must be time-bounded. Thus, new requirements also arise for a real-time operating system (RTOS), in particular if the parallel execution of hard real-time applications should be supported. In this paper we focus on the MERASA system software as an RTOS developed on top of the MERASA multi-core processor. The MERASA system software fulfils the requirements for time-bounded execution of parallel hard real-time tasks. In particular we focus on thread control with synchronisation mechanisms, memory management and resource management requirements. Our evaluations show that all system software functions are time-bounded by a worst-case execution time (WCET) analysis.

WCET Analysis of a Parallel 3D Multigrid Solver Executed on the MERASA Multi-Core

To meet performance requirements as well as constraints on cost and power consumption, future embedded systems will be designed with multi-core processors. However, the question of timing analysability is raised with these architectures. In the MERASA project, a WCET-aware multicore processor has been designed with the appropriate system software. They both guarantee that the WCET of tasks running on dierent cores can be safely analyzed since their possible interactions can be bounded. Nevertheless, computing the WCET of a parallel application is still not straightforward and a high-level preliminary analysis of the communication and synchronization patterns must be performed. In this paper, we report on our experience in evaluating the WCET of a parallel 3D multigrid solver code and we propose lines for further research on this topic.

Automatic WCET Analysis of Real-Time Parallel Applications

Tomorrow’s real-time embedded systems will be built upon multicore architectures. This raises two challenges. First, shared resources should be arbitrated in such a way that the WCET of independent threads running concurrently can be computed: in this paper, we assume that time-predictable multicore architectures are available. The second challenge is to develop software that achieves a high level of performance without impairing timing predictability. We investigate parallel software based on the POSIX threads standard and we show how the WCET of a parallel program can be analysed. We report experimental results obtained for typical parallel programs with an extended version of the OTAWA toolset.

TACLeBench : a benchmark collection to support worst-case execution time research

Engineering related research, such as research on worst-case execution time, uses experimentation to evaluate ideas. For these experiments we need example programs. Furthermore, to make the research experimentation repeatable those programs shall be made publicly available. We collected open-source programs, adapted them to a common coding style, and provide the collection in open-source. The benchmark collection is called TACLeBench and is available from GitHub in version 1.9 at the publication date of this paper. One of the main features of TACLeBench is that all programs are self-contained without any dependencies on standard libraries or an operating system.

A time-predictable execution mode for superscalar pipelines with instruction prescheduling

The time predictability of the components of a real-time system is required whenever it must be guaranteed that deadlines will be met. Research on techniques to evaluate the Worst-Case Execution Time (WCET) of programs has received much attention these last years but current high-performance processors prove to be hard to model both safely and tightly. We acknowledge the difficulty of taking into account more and more dynamic mechanisms within static analysis and this motivates our approach that consists in making the processor fit WCET estimation techniques. We focus on out-of-order superscalar pipelines and we propose to regulate the instruction flow so that subsequent basic blocks execute independently one of each other. This would allow any WCET estimation tool to limit the measurement to individual basic blocks.