Christophe Bayle

Plasma total homocysteine and other thiols analyzed by capillary electrophoresis/laser-induced fluorescence detection: Comparison with two other methods

We present a new analytical method for thiol quantification in plasma, based on the use of capillary electrophoresis (CE) and laser‐induced fluorescence (LIF) to analyze 6‐iodoacetamidofluorescein derivatives. Quantitative results of homocysteine, glutathione, cysteinylglycine, and cystationine are presented. A comparison of the quantitation of homocysteine in plasma, using high performance liquid chromatography/fluorscence detection and fluorescence polarization immunoassay is proposed. The results indicate that these techniques for plasma total homocysteine (tHcy) determination can be used interchangeably. The major advantage of CE‐LIF is that it can quantitate the thiols in one run while keeping the price of consumables reasonable.

Assays for total homocysteine and other thiols by capillary electrophoresis–laser-induced fluorescence detection: I. Preanalytical condition studies

In recent papers, we presented a new analytical method for thiol quantification in serum. It is based on the use of capillary electrophoresis and laser-induced fluorescence to analyze thiol 6-iodoacetamidofluoresceine (IAF) derivatives. Quantitative results of homocysteine, glutathione, cysteine-glycin, and cysteine were shown (Clin. Chem. 45 (1999) 412). A comprehensive comparison of the quantitation of homocysteine in serum, using high-performance liquid chromatography/conventional fluorescence detection and fluorescence polarization immunoassay was also used (E. Caussé et al., Electrophoresis 21 (2000) 2074). Sample preparation prior to derivatization with IAF had never been investigated. In this work we present the results of quantitation of thiols in serum and plasma with three different anticoagulants widely used: ethylenediaminetetraacetic acid (EDTA), heparin, and sodium citrate. We show that serum and EDTA plasma gave the same results. Then serum protein precipitations by acetonitrile, acetone, sulfosalicylic acid, perchloric acid and trichloracetic acid, prior to derivatization by IAF, were also investigated. Their influence on the concentrations of the thiols were determined. Sulfosalicylic acid and acetonitrile precipitations are well adapted, whereas acetone cannot be used.

Assay of total homocysteine and other thiols by capillary electrophoresis and laser-induced fluorescence detection: II. Pre-analytical and analytical conditions

In recent papers, we presented a new analytical method for thiol quantification in serum. This method was developed with capillary electrophoresis (CE) and laser-induced fluorescence (LIF) to analyze thiol-iodoacetamidofluoresceine (IAF) derivatives. Quantitative results for homocysteine, glutathione, cysteinylglycine, and cysteine were presented (Caussé E., et al., Clin. Chem. 45 (1999) 412). An exhaustive comparison of the quantitation of homocysteine in plasma, using high-performance liquid chromatography with either conventional fluorescence detection or fluorescence polarization immunoassay was also reported (Caussé E., et al., Electrophoresis 21 (2000) 2074). Sample preparation prior to derivatization with IAF had never been investigated. Recently we studied protein precipitation in serum with different organic agents (Caussé E., et al., J. Chromatogr. A 895 (2000) 173). In this work, we evaluated the conditions of protein precipitation in function of the amounts of acetonitrile and their influence on quantitation and quality of the electropherograms. Then, we looked at the variation of thiol concentrations in the haemolysis states and studied the thiol stability of blood samples cooled on ice.

Automated large-volume sample stacking procedure to detect labeled peptides at picomolar concentration using capillary electrophoresis and laser-induced fluorescence detection

We have developed an automated large-volume sample stacking (LVSS) procedure to detect fluorescein isothiocyanate-labeled peptides in the picomolar range. The injection duration is 10 min at 50 mbar to fill 62% of the capillary volume to the detection cell. The calculated limit of detection (S/N=3), filling 1% of the capillary volume, is 74 pM for bradykinin and 45 pM for L-enkephalin with samples diluted in water and analyzed in a 50 mM borate buffer, pH 9.2. With the automated LVSS system, the limits of detection are 7 pM for bradykinin, 3 pM for L-enkephalin and 2 pM for substance P. LVSS is shown to be quantitative from 500 to 10 pM.

Capillary electrochromatography-laser-induced fluorescence method for separation and detection of dansylated dialkylamine tags in encoded combinatorial libraries.

LC-fluorescence and LC-MS methods have been previously reported for use in decoding bead-based combinatorial libraries. We present the use of capillary electrochromatography (CEC) for highly selective decoding in combination with laser-induced fluorescence (LIF) detection for high sensitivity. The results are compared to prior data obtained using HPLC with fluorescence detection. The use of CEC shows promise for miniaturization and multiplexing for future applications, and the use of LIF detection can allow for detection at sub-pmol amounts.

Some applications of near-ultraviolet laser-induced fluorescence detection in nanomolar- and subnanomolar-range high-performance liquid chromatography or micro-high-performance liquid chromatography.

In this work we present some applications of near-UV laser-induced fluorescence (LIF) with micro-HPLC (microHPLC) and HPLC. To test the sensitivity of the detection, we used pyrene and aflatoxins, because both of these molecules exhibit native fluorescence. Then we studied catecholamines derivatized with 1,2-diphenylethylenediamine. The results show that we were able to reach better sensitivity levels than previously described in LIF studies. For catecholamines, a 50-fold increase in sensitivity compared to conventional fluorescence was obtained. These results indicate that LIF detection associated with HPLC or microHPLC can be used to detect very low concentrations of substances that can be excited in the near-UV range after labeling at nanomolar concentrations.

Chiral determination of amino acids by capillary electrophoresis and laser-induced fluorescence at picomolar concentrations

In this publication we present results on the determination of enantiomers of amino acids at very low concentrations. A fluoresceine-based chiral dye was synthesized to allow the separation of diastereoisomers of D- and L-amino acids. We used capillary electrophoresis with different non-ionic surfactants (Brij). The separation parameters were optimized and separations of D- and L-isovaline, an unusual terrestrial amino acid, were obtained. The sensitivity limits were also determined using a commercial laser-induced fluorescence detector. The quantitation of these amino acids is very important to understand the process of chiral selection on Earth.

Handling and detection of 0.8 amol of a near-infrared cyanine dye by capillary electrophoresis with laser-induced fluorescence detection

We are interested in the detection of DNA adducts and other trace analytes by labeling them with a fluorescent tag followed by use of capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) for high resolution and sensitivity. Towards this goal, here we report the following: (1) synthesis and handling properties of a near-IR, carboxyl-substituted heptamethine cyanine dye; (2) modification of an existing ball lens LIF detector to provide near-LIF detection with excitation at 785 nm for CE; and (3) corresponding handling and detection of as little as 0.8 amol of the dye by enrich-injection of 4.7 microl of 1 x 10(-13) mol/l dye in methanol from an 8-microl volume into a corresponding CE-LIF system. The electrolyte for the separation was methanol-40 mmol/l aqueous sodium borate (98:2, v/v). This finding encourages further exploration of the dye by functionalization of its carboxyl group for chemical labeling purposes.

Choice of different dyes to label tyrosine and nitrotyrosine

In this work, we will present some attempts to analyze tyrosine and nitrotyrosine using capillary electrophoresis and either UV-Visible detection or laser-induced fluorescence (LIF) detection. An argon ion (488 nm) laser is used for fluorescein isothiocyanate (FITC) and 7-fluoro-4-nitro-2,1,3-benzoxadiazole (NBD-F). A near infrared (780 nm) laser is used for NIR 780 derivatives. The UV-Visible limit of detection is 2.5 microM whereas it is in the range of 30 nM for LIF detection.