Christophe Genty

Molecular criteria for discriminating museum Asian lacquerware from different vegetal origins by pyrolysis gas chromatography/mass spectrometry

This paper focuses on the identification of several chemical markers of vegetal species of Oriental lacquers with the aim at providing a methodology consistent with sampling restrictions necessarily applied in the field of cultural heritage. The method proposed is based on rapid and easy single step thermally assisted hydrolysis-methylation (THM) pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) analysis that can be carried out with a minimum amount of matter (typically 10 μg for a sample collected on a museum or an archaeological object). The main contribution of this study is to provide multiple molecular criteria for discriminating the three Asian species used for making lacquers, namely Rhus verniciflua Stokes, Rhus succedanea and Melanorrhoea usitata. Because these trees grow in specific areas, identifying the species involved in ancient lacquer coatings also provides geobotanical data and fruitful information on the exchange networks and trading routes developed by ancient societies. With this purpose, a systematic study of all pyrolysis products of lacquer coatings was carried out on modern dried lacquer films from authentified provenance. It was demonstrated that the whole pyrolysis products play a significant role in identifying the vegetal species. The chemotaxonomic value of homologous series of alkanes, alkenes and benzene derivatives, rarely explored until now, was assessed. It was shown that the combination of data related to five distinct groups of pyrolytic markers (composition and/or distribution of alkanes, alkenes and benzene, alkenyl-, alkylcatechol and phenol derivatives) provided new strong criteria to establish vegetal origin and provenance of Asian artworks, even though they have been largely altered over time. Case studies of archaeological Chinese lacquered artefacts and Japanese Buddhistic altar were thereafter successfully investigated to address informative potential and efficiency of these criteria on ancient and degraded lacquer coatings.

Estrone direct photolysis: By-product identification using LC-Q-TOF

The identification of degradation products generated upon photolysis of estrone (E1), a natural estrogenic hormone, under simulated UV irradiation conditions was addressed by the use of LC-Q-TOF mass spectrometry. The structures of the main degradation products were elucidated, demonstrating how the use of model molecules 5,6,7,8-tetrahydro-2-naphtol (THN), 2-methylcyclopentanone (MCP), labeled molecule estrone D(4) (E1-D(4)), the investigation of the fragmentation pathways of the parent E1, the concurrent use of CID and exact mass measurements permit the characterization of structural modifications induced by photodegradation processes. In the present study, we identified nine major by-products of which seven photoproducts correspond to E1H(+) modified in positions other than the C-2, C-4 and C-16 of E1. Most of them showed one to three additional hydroxylations preferentially located on the aromatic ring of the parent E1, which confirms that these products may present environmental risk. Applications to real water samples have been conducted to extend the validity of the present study to environmental samples.

Characterization of the photodegradation products of metolachlor: structural elucidation, potential toxicity and persistence

Aqueous solutions of metolachlor and metolachlor-d(6) were photolyzed with UV-visible radiations. The structures of 15 by-products of metolachlor were determined through gas chromatography-mass spectrometry analyses using electron and chemical ionization combined with multistage mass spectrometry. The photolysis by-products of metolachlor resulted mainly from dehalogenation and hydroxylation, in some cases accompanied by cyclization. In silico tests for toxicity prediction showed that the toxicity of some photolysis products is expected to be greater than that of metolachlor. Persistence studies showed that the by-product relative abundances vary in large amounts with the irradiation time. The post-photolysis evolution of the solution was also studied, in order to determine the persistence of the main by-products. It allowed to establish that most of the by-products can be found more than 12 h after the end of the photolysis, which is of a great concern as treated water is generally available for consumption only a few hours after treatment in most of industrial processes.

Ultraviolet degradation of procymidone – structural characterization by gas chromatography coupled with mass spectrometry and potential toxicity of photoproducts using in silico tests

RATIONALE Procymidone is a dicarboximide fungicide mainly used for vineyard protection but also for different crops. The structural elucidation of by-products arising from the UV-visible photodegradation of procymidone has been investigated by gas chromatography coupled with mass spectrometry. The potential toxicities of photoproducts were estimated by in silico tests. METHODS Aqueous solutions of procymidone were irradiated for up to 90 min in a self-made reactor equipped with a mercury lamp. Analyses were carried out on a gas chromatograph coupled with an ion trap mass spectrometer operated in electron ionization and methanol positive chemical ionization. Multistage collision-induced dissociation (CID) experiments were performed to establish dissociation pathways of ions. Toxicities of byproducts were estimated using the QSAR T.E.S.T. program. RESULTS Sixteen photoproducts were investigated. Chemical structures were proposed mainly based on the interpretation of multistage CID experiments, but also on their relative retention times and kinetics data. These structures enabled photodegradation pathways to be suggested. Only three photoproducts remain present after 90 min of irradiation. Among them, 3,5-dichloroaniline presents a predicted rat LD50 toxicity about ten times greater than that of procymidone. CONCLUSIONS 3,5-Dichloroaniline is the only photoproduct reported in previous articles. Eight by-products among the sixteen characterized might be as toxic, if not more, than procymidone itself considering the QSAR-predicted rat LD50.

Analysis of the volatile organic matter of engine piston deposits by direct sample introduction thermal desorption gas chromatography/mass spectrometry.

This article establishes an alternative method for the characterization of volatiles organic matter (VOM) contained in deposits of the piston first ring grooves of diesel engines using a ChromatoProbe direct sample introduction (DSI) device coupled to gas chromatography/mass spectrometry (GC/MS) analysis. The addition of an organic solvent during thermal desorption leads to an efficient extraction and a good chromatographic separation of extracted products. The method was optimized investigating the effects of several solvents, the volume added to the solid sample, and temperature programming of the ChromatoProbe DSI device. The best results for thermal desorption were found using toluene as an extraction solvent and heating the programmable temperature injector from room temperature to 300 degrees C with a temperature step of 105 degrees C. With the use of the optimized thermal desorption conditions, several components have been positively identified in the volatile fraction of the deposits: aromatics, antioxidants, and antioxidant degradation products. Moreover, this work highlighted the presence of diesel fuel in the VOM of the piston deposits and gave new facts on the absence of the role of diesel fuel in the deposit formation process. Most importantly, it opens the possibility of quickly performing the analysis of deposits with small amounts of samples while having a good separation of the volatiles.

Investigation of the Unusual Behavior of Metolachlor under Chemical Ionization in a Hybrid 3D Ion Trap Mass Spectrometer

This article describes the strange behavior of the widely used herbicide metolachlor under chemical ionization conditions in a hybrid source ion trap mass spectrometer in gas chromatography/mass spectrometry (GC/MS) coupling. With the use of ammonia as the reagent gas, metolachlor provides a chlorinated ion at m/z 295/297, almost as abundant as the protonated molecule at m/z 284/286, which cannot be isolated to perform tandem mass spectrometry (MS(n)) experiments. Curiously, this ion at m/z = M + 12 is not observed for the herbicides acetochlor and alachlor, which present very similar chemical structures. The chemical structure of the m/z 295/297 ions and the explanation of the observed phenomenon based on the metastable behavior of these ions were elucidated on the basis of experiments including isotopic labeling and modifications of the operating conditions of the ion trap mass spectrometer. This work allows one to give new recommendations for an optimized use of hybrid source ion trap mass spectrometers.

Elucidation of the dissociation pathways of electro-ionized estrone.

With the future aim of using gas chromatography coupled with mass spectrometry to characterize the transformation products of estrone submitted to UV-photolysis or to waste water treatment plants, an interpretation of the electron impact mass spectrum of estrone is presented. Fragmentation mechanisms are proposed on the basis of high-resolution measurements performed with a magnetic sector analyzer. Multiple-stage mass spectrometry experiments were carried out using an ion trap mass spectrometer. The structures proposed for product ions were confirmed by the m/z shifts observed in the estrone-d(4) and estrone methyl ether electron ionization mass spectra. If the formation of some of the most abundant ions may easily be explained by alpha-cleavages and retro-Diels-Alder type rearrangements, complex mechanisms need to be considered to rationalize the formation of others. Isotope labelling allows discrimination of isobaric ions.

Structural elucidation of metolachlor photoproducts by liquid chromatography/high-resolution tandem mass spectrometry.

RATIONALE Metolachlor is one of the most intensively used chloroacetanilide herbicides in agriculture. It has been detected in water; consequently, under UV-visible irradiation, it can be transformed in degradation products (TPs). The structures of TPs were elucidated by liquid chromatography/high-resolution tandem mass spectrometry (LC/HR-MS/MS). The potential toxicities of these TPs were estimated by in silico tests. METHODS Aqueous solutions of metolachlor were irradiated in a self-made reactor equipped with a mercury vapor lamp. Analyses were carried out using high-performance liquid chromatography coupled to quadrupole time-of-flight (QTOF) mass spectrometer. High-resolution m/z measurements, MS/MS and isotopic labeling experiments allowed structural elucidation of metolachlor TPs. Their toxicities were estimated in silico, using the T.E.S.T. RESULTS Ten major metolachlor photoproducts were characterized by LC/MS/MS after irradiation of metolachlor in aqueous solution. Elucidation of their chemical structures was identified using high-resolution measurements and MS/MS experiments. They resulted from the combination of dehalogenation, hydroxylation and cyclisation processes. The potential oral rat lethal dose (LD50) was assessed with QSAR tests for metolachlor and each photoproduct. Results indicate that most of the TPs are much more toxic than metolachlor. CONCLUSIONS UV-vis irradiation of metolachlor in aqueous solution leads to the formation of ten photoproducts. QSAR estimations show that the location of added hydroxyl group(s) is of key relevance as regards to biological activity and that routine water analysis should take into account the TPs are more toxic than the parent molecule.

Isomerization of fenbuconazole under UV-visible irradiation - chemical and toxicological approaches.

RATIONALE Fenbuconazole is a fungicide commonly used for the protection of vineyards, vegetables and grain crops. Under UV-visible irradiation, it undergoes isomerization through various cyclization processes. Isomeric structures were elucidated by liquid chromatography/high-resolution multiple-stage mass spectrometry (LC/HR-MS(n) ) coupling. The potential toxicities of these isomers were estimated by in silico tests. METHODS Aqueous solutions of fenbuconazole and grapes treated with this fungicide were irradiated in a self-made reactor equipped with a mercury vapor lamp. Analyses were carried out using high-performance liquid chromatography (HPLC) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS). High-resolution m/z measurements, multiple-stage mass spectrometry and isotopic labeling experiments allowed structural elucidation of the isomers of fenbuconazole. In silico toxicity estimations were carried out using the T.E.S.T. RESULTS Seven isomers of fenbuconazole were detected after irradiation of the fungicide in aqueous solution; the major ones were also detected in the flesh of treated grapes irradiated under laboratory conditions. Elucidation of their chemical structures owing to high resolution measurements and multi-stage collision induced dissociation experiments allowed confirmation of photo-transformation pathways mainly dominated by cyclization processes. Photo-induced isomers exhibited higher potential toxicities than fenbuconazole for Daphnia magna and fathead minnow species. CONCLUSIONS UV-visible irradiation of fenbuconazole in aqueous solution and on grapes leads to the formation of isomers, all of which being potentially much more toxic than the parent fungicide.

Structural elucidation and estimation of the acute toxicity of the major UV-visible photoproduct of fludioxonil - detection in both skin and flesh samples of grape.

Ultraviolet (UV)-visible irradiation of fludioxonil was investigated with two photoreactors using either a mercury or xenon vapor lamp. In both cases, it led to the formation of only one photoproduct in significant amount: 2-(2,2-difluorobenzo[d][1,3]dioxol-4-yl)-2-(nitrosomethylene)-4-oxobutanenitrile, which has been characterized using Liquid Chromatography - High Resolution - Tandem Mass Spectrometry (LC-HR-MS/MS) coupling. A photolysis pathway has been proposed to rationalize its formation in degassed water. In vitro bioassays on Vibrio fischeri bacteria showed that UV-vis irradiation of an aqueous solution of fludioxonil significantly increases its toxicity. Because no other by-product was detected in significant amount, the photoproduct mentioned above may be considered mainly responsible for this increase in toxicity. Grape berries treated with a 50 ppm aqueous solution of fludioxonil were submitted to UV-visible irradiation under laboratory conditions. The fungicide and photoproduct were detected in both skin and flesh of berries, even after they have been rinsed with water. The ability of the photoproduct to pass through the fruit skin is comparable with that of fludioxonil. These results are of concern for consumers because they mean that water tap rinsing does not lead to efficient removing of both compounds.