Christopher B. Taber

Strength Training for Endurance Athletes: Theory to Practice

ABSTRACT THE PURPOSE OF THIS REVIEW IS TWOFOLD: TO ELUCIDATE THE UTILITY OF RESISTANCE TRAINING FOR ENDURANCE ATHLETES, AND PROVIDE THE PRACTITIONER WITH EVIDENCED-BASED PERIODIZATION STRATEGIES FOR CONCURRENT STRENGTH AND ENDURANCE TRAINING IN ATHLETIC POPULATIONS. BOTH LOW-INTENSITY EXERCISE ENDURANCE (LIEE) AND HIGH-INTENSITY EXERCISE ENDURANCE (HIEE) HAVE BEEN SHOWN TO IMPROVE AS A RESULT OF MAXIMAL, HIGH FORCE, LOW VELOCITY (HFLV) AND EXPLOSIVE, LOW-FORCE, HIGH-VELOCITY STRENGTH TRAINING. HFLV STRENGTH TRAINING IS RECOMMENDED INITIALLY TO DEVELOP A NEUROMUSCULAR BASE FOR ENDURANCE ATHLETES WITH LIMITED STRENGTH TRAINING EXPERIENCE. A SEQUENCED APPROACH TO STRENGTH TRAINING INVOLVING PHASES OF STRENGTH-ENDURANCE, BASIC STRENGTH, STRENGTH, AND POWER WILL PROVIDE FURTHER ENHANCEMENTS IN LIEE AND HIEE FOR HIGH-LEVEL ENDURANCE ATHLETES.

Jump Shrug Height and Landing Forces Across Various Loads

The purpose of this study was to examine the effect that load has on the mechanics of the jump shrug. Fifteen track and field and club/intramural athletes (age 21.7 ± 1.3 y, height 180.9 ± 6.6 cm, body mass 84.7 ± 13.2 kg, 1-repetition-maximum (1RM) hang power clean 109.1 ± 17.2 kg) performed repetitions of the jump shrug at 30%, 45%, 65%, and 80% of their 1RM hang power clean. Jump height, peak landing force, and potential energy of the system at jump-shrug apex were compared between loads using a series of 1-way repeated-measures ANOVAs. Statistical differences in jump height (P < .001), peak landing force (P = .012), and potential energy of the system (P < .001) existed; however, there were no statistically significant pairwise comparisons in peak landing force between loads (P > .05). The greatest magnitudes of jump height, peak landing force, and potential energy of the system at the apex of the jump shrug occurred at 30% 1RM hang power clean and decreased as the external load increased from 45% to 80% 1RM hang power clean. Relationships between peak landing force and potential energy of the system at jump-shrug apex indicate that the landing forces produced during the jump shrug may be due to the landing strategy used by the athletes, especially at lighter loads. Practitioners may prescribe heavier loads during the jump-shrug exercise without viewing landing force as a potential limitation.

Comparison of the Relationship between Lying and Standing Ultrasonography Measures of Muscle Morphology with Isometric and Dynamic Force Production Capabilities

The purpose of the current study was (1) to examine the differences between standing and lying measures of vastus lateralis (VL), muscle thickness (MT), pennation angle (PA), and cross-sectional area (CSA) using ultrasonography; and (2) to explore the relationships between lying and standing measures with isometric and dynamic assessments of force production—specifically peak force, rate of force development (RFD), impulse, and one-repetition maximum back squat. Fourteen resistance-trained subjects (age = 26.8 ± 4.0 years, height = 181.4 ± 6.0 cm, body mass = 89.8 ± 10.7 kg, back squat to body mass ratio = 1.84 ± 0.34) agreed to participate. Lying and standing ultrasonography images of the right VL were collected following 48 hours of rest. Isometric squat assessments followed ultrasonography, and were performed on force platforms with data used to determine isometric peak force (IPF), as well as RFD and impulse at various time points. Forty-eight hours later, one-repetition maximum back squats were performed by each subject. Paired-samples t-tests revealed statistically significant differences between standing and lying measurements of MT (p < 0.001), PA (p < 0.001), and CSA (p ≤ 0.05), with standing values larger in all cases. Further, standing measures were correlated more strongly and abundantly to isometric and dynamic performance. These results suggest that if practitioners intend to gain insight into strength-power potential based on ultrasonography measurements, performing the measurement collection with the athlete in a standing posture may be preferred.

Pull From the Knee: Proper Technique and Application

THE PULL FROM THE KNEE IS A WEIGHTLIFTING MOVEMENT DERIVATIVE THAT CAN BE USED IN THE TEACHING PROGRESSION OF THE CLEAN AND SNATCH EXERCISES. THIS EXERCISE EMPHASIZES POSITIONAL STRENGTH DURING THE TRANSITION PHASE AND THE TRIPLE EXTENSION OF THE HIP, KNEE, AND ANKLE JOINTS THAT IS CHARACTERISTIC OF WEIGHTLIFTING MOVEMENTS.

Roles of Maximal Strength and Rate of Force Development in Maximizing Muscular Power

ABSTRACT THIS BRIEF REVIEW ENCOMPASSES THE ROLE OF MAXIMAL STRENGTH AND RATE OF FORCE DEVELOPMENT IN THE PRODUCTION OF MUSCULAR POWER. IT BEGINS WITH THE INVESTIGATION OF POWER OUTPUT AND ITS IMPORTANCE FOR SPORT. AFTER THIS BASIS FOR POWER PRODUCTION, THIS REVIEW EXAMINES BOTH MAXIMAL STRENGTH AND RATE OF FORCE DEVELOPMENT EFFECTS ON THE DEVELOPMENT OF OPTIMAL POWER OUTPUT. FINALLY, A RATIONAL WHY MAXIMIZING RATE OF FORCE DEVELOPMENT DURING THE COMPETITION SEASON TO ACHIEVE SUCCESS IN SPORT IS PROVIDED.

Accentuated Eccentric Loading for Training and Performance: A Review

Accentuated eccentric loading (AEL) prescribes eccentric load magnitude in excess of the concentric prescription using movements that require coupled eccentric and concentric actions, with minimal interruption to natural mechanics. This method has been theorized to potentiate concentric performance through higher eccentric loading and, thus, higher concentric force production. There is also evidence for favorable chronic adaptations, namely shifts to faster myosin heavy chain isoforms and changes in IIx-specific muscle cross-sectional area. However, research concerning the acute and chronic responses to AEL is inconclusive, likely due to inconsistencies in subjects, exercise selection, load prescription, and method of providing AEL. Therefore, the purpose of this review is to summarize: (1) the magnitudes and methods of AEL application; (2) the acute and chronic implications of AEL as a means to enhance force production; (3) the potential mechanisms by which AEL enhances acute and chronic performance; and (4) the limitations of current research and the potential for future study.

Characterising Overload in Inertial Flywheel Devices for Use in Exercise Training

Abstract The purposes of this investigation were to: (1) assess kinetic characteristics of overload, (2) examine eccentric and concentric muscle activations and (3) explore velocity measurement as a method of intensity prescription in inertial flywheel squat training. A series of two experiments were performed: one assessing kinetic and muscle activation characteristics of flywheel squat training using three progressive inertial loads. The second experiment assessed inertial load-velocity relationships using six progressive inertial loads. Peak force, net impulse, positive–negative impulse ratio and positive–negative impulse duration ratio were each statistically significant between all three load conditions (p < 0.05). Concentric vastus lateralis muscle activation was the only significant increase between inertial loads (p < 0.05). Although not statistically significant, concentric quadricep muscle activation was increased from the lowest to highest inertia. Conversely, eccentric quadricep muscle activation was reduced from the lowest to highest inertia. In the second experiment, statistically significant regression equations were observed for average concentric velocity (R2 = 0.66) and peak concentric velocity (R2 = 0.60). In conclusion, our results indicate (1) overload is possible kinetically, (2) phase-specific muscle activation responds differently to increased inertia and (3) velocity has the potential to be used for load prescription in the inertial flywheel squat.

Force-Time Differences between Ballistic and Non-Ballistic Half-Squats

The purpose of this study was to examine the force-time differences between concentric-only half-squats (COHS) performed with ballistic (BAL) or non-ballistic (NBAL) intent across a range of loads. Eighteen resistance-trained men performed either BAL or NBAL COHS at 30%, 50%, 70%, and 90% of their one repetition maximum (1RM) COHS. Relative peak force (PF) and relative impulse from 0–50 ms (Imp50), 0–90 ms (Imp90), 0–200 ms (Imp200), and 0–250 ms (Imp250) were compared using a series of 2 × 4 (intent × load) repeated measures ANOVAs with Bonferroni post hoc tests. Cohen’s d effect sizes were calculated to provide measures of practical significance between the BAL and NBAL COHS and each load. BAL COHS produced statistically greater PF than NBAL COHS at 30% (d = 3.37), 50% (d = 2.88), 70% (d = 2.29), and 90% 1RM (d = 1.19) (all p < 0.001). Statistically significant main effect differences were found between load-averaged BAL and NBAL COHS for Imp90 (p = 0.006, d = 0.25), Imp200 (p = 0.001, d = 0.36), and Imp250 (p < 0.001, d = 0.41), but not for Imp50 (p = 0.018, d = 0.21). Considering the greater PF and impulse observed during the BAL condition, performing COHS with BAL intent may provide a favorable training stimulus compared to COHS performed with NBAL intent.

Neuromuscular Adaptations Following Training and Protein Supplementation in a Group of Trained Weightlifters

The purpose of this study was to examine the effects of a recovery supplement compared with a placebo on muscle morphology in trained weightlifters. Vastus lateralis and muscle fiber cross sectional area of type I and type II fibers were compared between groups using a series of 2 × 2 (group × time) repeated measure ANOVAs. Both groups on average improved cross-sectional area of the vastus lateralis, type I and type II muscle fibers from pre-to-post but individual response varied within both groups. Greater magnitude of changes in type I and type II muscle fibers were observed for the placebo group but not for vastus lateralis cross sectional area. Additionally, subjects were divided into large and small fiber groups based on combined fiber size at the start of the investigation. These findings indicate that the recovery supplement utilized provided no greater effect compared with a placebo in a 12-week block periodization protocol in trained weightlifters. The primary determinate of fiber size changes in the study was determined to be the initial fiber size of muscle fibers with larger practical changes observed in the small fiber group compared with the large fiber group in type I, II, and ultrasound cross-sectional area (CSA).

Repetition-to-Repetition Differences Using Cluster and Accentuated Eccentric Loading in the Back Squat

The current investigation was an examination of the repetition-to-repetition magnitudes and changes in kinetic and kinematic characteristics of the back squat using accentuated eccentric loading (AEL) and cluster sets. Trained male subjects (age = 26.1 ± 4.1 years, height = 183.5 ± 4.3 cm, body mass = 92.5 ± 10.5 kg, back squat to body mass ratio = 1.8 ± 0.3) completed four load condition sessions, each consisting of three sets of five repetitions of either traditionally loaded straight sets (TL), traditionally loaded cluster sets (TLC), AEL cluster sets (AEC), and AEL straight sets where only the initial repetition had eccentric overload (AEL1). Eccentric overload was applied using weight releasers, creating a total eccentric load equivalent to 105% of concentric one repetition maximum (1RM). Concentric load was 80% 1RM for all load conditions. Using straight sets (TL and AEL1) tended to decrease peak power (PP) (d = −1.90 to −0.76), concentric rate of force development (RFDCON) (d = −1.59 to −0.27), and average velocity (MV) (d = −3.91 to −1.29), with moderate decreases in MV using cluster sets (d = −0.81 to −0.62). Greater magnitude eccentric rate of force development (RFDECC) was observed using AEC at repetition three (R3) and five (R5) compared to all load conditions (d = 0.21–0.65). Large within-condition changes in RFDECC from repetition one to repetition three (∆REP1–3) were present using AEL1 (d = 1.51), demonstrating that RFDECC remained elevated for at least three repetitions despite overload only present on the initial repetition. Overall, cluster sets appear to permit higher magnitude and improved maintenance of concentric outputs throughout a set. Eccentric overload with the loading protocol used in the current study does not appear to potentiate concentric output regardless of set configuration but may cause greater RFDECC compared to traditional loading.