Christopher D. Easton

An Alkylated Indacenodithieno[3,2‐b]thiophene‐Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses

A new synthetic route, to prepare an alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor (C8-ITIC), is reported. Compared to the reported ITIC with phenylalkyl side chains, the new acceptor C8-ITIC exhibits a reduction in the optical band gap, higher absorptivity, and an increased propensity to crystallize. Accordingly, blends with the donor polymer PBDB-T exhibit a power conversion efficiency (PCE) up to 12.4%. Further improvements in efficiency are found upon backbone fluorination of the donor polymer to afford the novel material PFBDB-T. The resulting blend with C8-ITIC shows an impressive PCE up to 13.2% as a result of the higher open-circuit voltage. Electroluminescence studies demonstrate that backbone fluorination reduces the energy loss of the blends, with PFBDB-T/C8-ITIC-based cells exhibiting a small energy loss of 0.6 eV combined with a high JSC of 19.6 mA cm-2 .

Self-assembly of ciprofloxacin and a tripeptide into an antimicrobial nanostructured hydrogel

This work reports the self-assembly of a sparingly soluble antibiotic (ciprofloxacin) and a hydrophobic tripeptide ((D)Leu-Phe-Phe) into supramolecular nanostructures that yield a macroscopic hydrogel at physiological pH. Drug incorporation results in modified morphology and rheological properties of the self-assembled hydrogel. These changes can be correlated with intermolecular interactions between the drug and the peptide, as confirmed by spectroscopic analysis (fluorescence, circular dichroism, IR). The drug appears bound within the hydrogel by non-covalent interactions, and retains its activity over a prolonged release timescale. Antimicrobial activity of the ciprofloxacin-peptide self-assembled hydrogel was evaluated against Staphylococcus aureus, Escherichia coli, and a clinical strain of Klebsiella pneumoniae. Interestingly, the peptide hydrogel alone exhibited a mild anti-bacterial activity against Gram-negative bacteria. While toxic to bacteria, no major cytotoxicity was seen in haemolysis assays of human red blood cells or in mouse fibroblast cell cultures. This new approach of drug incorporation into the nanostructure of a simple tripeptide hydrogel by self-assembly may have important applications for cost-effective wound dressings and novel antimicrobial formulations.

Unzipping the role of chirality in nanoscale self-assembly of tripeptide hydrogels

Change of chirality is a useful tool to manipulate the aqueous self-assembly behaviour of uncapped, hydrophobic tripeptides. In contrast with other short peptides, these tripeptides form hydrogels at a physiological pH without the aid of organic solvents or end-capping groups (e.g. Fmoc). The novel hydrogel forming peptide (D)Leu-Phe-Phe ((D)LFF) and its epimer Leu-Phe-Phe (LFF) exemplify dramatic supramolecular effects induced by subtle changes to stereochemistry. Only the d-amino acid-containing peptide instantly forms a hydrogel in aqueous solution following a pH switch, generating long fibres (>100 μm) that entangle into a 3D network. However, unexpected nanostructures are observed for both peptides and they are particularly heterogeneous for LFF. Structural analyses using CD, FT-IR and fluorescent amyloid staining reveal anti-parallel beta-sheets for both peptides. XRD analysis also identifies key distances consistent with beta-sheet formation in both peptides, but suggests additional high molecular order and extended molecular length for (D)LFF only. Molecular modelling of the two peptides highlights the key interactions responsible for self-assembly; in particular, rapid self-assembly of (D)LFF is promoted by a phenylalanine zipper, which is not possible because of steric factors for LFF. In conclusion, this study elucidates for the first time the molecular basis for how chirality can dramatically influence supramolecular organisation in very short peptide sequences.

Suppressed Polysulfide Crossover in Li–S Batteries through a High-Flux Graphene Oxide Membrane Supported on a Sulfur Cathode

Utilization of permselective membranes holds tremendous promise for retention of the electrode-active material in electrochemical devices that suffer from electrode instability issues. In a rechargeable Li–S battery—a strong contender to outperform the Li-ion technology—migration of lithium polysulfides from the sulfur cathode has been linked to rapid capacity fading and lower Coulombic efficiency. However, the current approaches for configuring Li–S cells with permselective membranes suffer from large ohmic polarization, resulting in low capacity and poor rate capability. To overcome these issues, we report the facile fabrication of a high-flux graphene oxide membrane directly onto the sulfur cathode by shear alignment of discotic nematic liquid crystals of graphene oxide (GO). In conjunction with a carbon-coated separator, the highly ordered structure of the thin (∼0.75 μm) membrane and its inherent surface charge retain a majority of the polysulfides, enabling the cells to deliver very high initial dis...

Nanotopographic Surfaces with Defined Surface Chemistries from Amyloid Fibril Networks Can Control Cell Attachment

We show for the first time the possibility of using networks of amyloid fibrils, adsorbed to solid supports and with plasma polymer coatings, for the fabrication of chemically homogeneous surfaces with well-defined nanoscale surface features reminiscent of the topography of the extracellular matrix. The robust nature of the fibrils allows them to withstand the plasma polymer deposition conditions used with no obvious deleterious effect, thus enabling the underlying fibril topography to be replicated at the polymer surface. This effect was seen despite the polymer coating thickness being an order of magnitude greater than the fibril network. The in vitro culture of fibroblast cells on these surfaces resulted in increased attachment and spreading compared to flat plasma polymer films with the same chemical composition. The demonstrated technique allows for the rapid and reproducible fabrication of substrates with nanoscale fibrous topography that we believe will have applications in the development of new biomaterials allowing, for example, the investigation of the effect of extracellular matrix mimicking nanoscale morphology on cellular phenotype.

Micropatterning of Polymer Brushes: Grafting from Dewetting Polymer Films for Biological Applications

In this novel platform, a micropatterned polymer brush was obtained by grafting poly(poly(ethylene glycol) methyl ether methacrylate) (poly(PEGMA)) from a thin macroinitiator film using atom transfer radical polymerization (ATRP). A pattern of holes was formed in the macroinitiator film by taking advantage of its spontaneous dewetting above the glass transition temperature from a bottom polystyrene film, driven by unfavorable intermolecular forces. Patterning by dewetting can be achieved at length-scales from a few hundred nanometers to several tens of micrometers, by simply thermally annealing the bilayer above the glass transition temperature of the polymer. This approach is substrate-independent, as polymer films can be cast onto surfaces of different size, shape, or material. As a demonstration of its potential, proteins, and individual cells were attached on targeted bioadhesive polystyrene areas of the micropatterns within poly(PEGMA) protein-repellent brushes. We anticipate this approach will be suitable for the patterning of brushes, especially for biomedical applications such as in the study of single cells and of cell cocultures.

Shear Assisted Electrochemical Exfoliation of Graphite to Graphene

The exfoliation characteristics of graphite as a function of applied anodic potential (1-10 V) in combination with shear field (400-74 400 s(-1)) have been studied in a custom-designed microfluidic reactor. Systematic investigation by atomic force microscopy (AFM) indicates that at higher potentials thicker and more fragmented graphene sheets are obtained, while at potentials as low as 1 V, pronounced exfoliation is triggered by the influence of shear. The shear-assisted electrochemical exfoliation process yields large (∼10 μm) graphene flakes with a high proportion of single, bilayer, and trilayer graphene and small ID/IG ratio (0.21-0.32) with only a small contribution from carbon-oxygen species as demonstrated by X-ray photoelectron spectroscopy measurements. This method comprises intercalation of sulfate ions followed by exfoliation using shear induced by a flowing electrolyte. Our findings on the crucial role of hydrodynamics in accentuating the exfoliation efficiency suggest a safer, greener, and more automated method for production of high quality graphene from graphite.

Higher and lower supramolecular orders for the design of self-assembled heterochiral tripeptide hydrogel biomaterials

The self-assembly behaviour of the eight stereoisomers of Val-Phe-Phe tripeptides under physiological conditions is assessed by several spectroscopy and microscopy techniques. We report the first examples of self-organised hydrogels from tripeptides in the l-d-l or d-l-d configuration, besides the expected gels with the d-l-l or l-d-d configuration, thus widening the scope for using amino acid chirality as a tool to drive self-assembly. Importantly, the positions of d- and l-amino acids in the gelling tripeptides determine a higher or lower supramolecular order, which translates into macroscopic gels with different rheological properties and thermal behaviours. The more durable hydrogels perform well in cytotoxicity assays, and also as peptides in solution. An appropriate design of the chirality of self-assembling sequences thus allows for the fine-tuning of the properties of the gel biomaterials. In conclusion, this study adds key details of supramolecular organization that will assist in the ex novo design of assembling chiral small molecules for their use as biomaterials.

Applications of XPS in Biology and Biointerface Analysis

XPS has been used extensively to characterize the surface chemistry of materials used in bioengineering and is increasingly finding a role in biology. Its ability to characterize both the elemental and chemical structures of the surface makes it particularly useful, as it can be used to identify and image the chemical functional groups present on the surface of virtually any material. This review is intended both to profile traditional applications of XPS in bioengineering and biology as well as to discuss advances in XPS instrumentation aimed at enabling the characterization of biological and organic materials.

Applying “click” chemistry to polyurethanes: a straightforward approach for glycopolymer synthesis

We report a facile synthetic route to prepare polyurethanes with pendant sugar-moieties in the side-chain of the polymer through incorporation of diverse chain extenders capable of undergoing either copper catalyzed Huisgen 1,3-dipolar cycloaddition or thiol-ene click reactions.