Christopher V. Poulton
Massachusetts Institute of Technology
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Christopher V. Poulton.
Optics Letters | 2017
Christopher V. Poulton; Matthew J. Byrd; Manan Raval; Zhan Su; Nanxi Li; Erman Timurdogan; Douglas D. Coolbaugh; Diedrik Vermeulen; Michael R. Watts
We demonstrate passive large-scale nanophotonic phased arrays in a CMOS-compatible silicon photonic platform. Silicon nitride waveguides are used to allow for higher input power and lower phase variation compared to a silicon-based distribution network. A phased array at an infrared wavelength of 1550 nm is demonstrated with an ultra-large aperture size of 4u2009u2009mm×4u2009u2009mm, achieving a record small and near diffraction-limited spot size of 0.021°×0.021° with a side lobe suppression of 10 dB. A main beam power of 400 mW is observed. Using the same silicon nitride platform and phased array architecture, we also demonstrate, to the best of our knowledge, the first large-aperture visible nanophotonic phased array at 635 nm with an aperture size of 0.5u2009u2009mm×0.5u2009u2009mm and a spot size of 0.064°×0.074°.
Optics Letters | 2017
Christopher V. Poulton; Ami Yaacobi; David B. Cole; Matthew J. Byrd; Manan Raval; Diedrik Vermeulen; Michael R. Watts
We present, to the best of our knowledge, the first demonstration of coherent solid-state light detection and ranging (LIDAR) using optical phased arrays in a silicon photonics platform. An integrated transmitting and receiving frequency-modulated continuous-wave circuit was initially developed and tested to confirm on-chip ranging. Simultaneous distance and velocity measurements were performed using triangular frequency modulation. Transmitting and receiving optical phased arrays were added to the system for on-chip beam collimation, and solid-state beam steering and ranging measurements using this system are shown. A cascaded optical phase shifter architecture with multiple groups was used to simplify system control and allow for a compact packaged device. This system was fabricated within a 300xa0mm wafer CMOS-compatible platform and paves the way for disruptive low-cost and compact LIDAR on-chip technology.
Optics Express | 2016
Nanxi Li; Erman Timurdogan; Christopher V. Poulton; Matthew J. Byrd; Emir Salih Magden; Zhan Su; Purnawirman; Gerald Leake; Douglas D. Coolbaugh; Diedrik Vermeulen; Michael R. Watts
We demonstrate an erbium-doped fiber laser with a tunable silicon microring cavity. We measured a narrow laser linewidth (16 kHz) and single-mode continuous-wave emission over the C-band (1530nm-to-1560nm) at a swept-wavelength rate of 22,600nm/s or 3106THz/s.
Applied Physics Letters | 2017
Nanxi Li; Zhan Su; Purnawirman; E. Salih Magden; Christopher V. Poulton; Alfonso Ruocco; Neetesh Singh; Matthew J. Byrd; Jonathan D. B. Bradley; Gerald Leake; Michael R. Watts
In an optical interconnect circuit, microring resonators (MRRs) are commonly used in wavelength division multiplexing systems. To make the MRR and laser synchronized, the resonance wavelength of the MRR needs to be thermally controlled, and the power consumption becomes significant with a high-channel count. Here, we demonstrate an athermally synchronized rare-earth-doped laser and MRR. The laser comprises a Si3N4 based cavity covered with erbium-doped Al2O3 to provide gain. The low thermo-optic coefficient of Al2O3 and Si3N4 and the comparable thermal shift of the effective index in the laser and microring cross-sections enable lasing and resonance wavelength synchronization over a wide range of temperatures. The power difference between matched and unmatched channels remains greater than 15u2009dB from 20 to 50u2009°C due to a synchronized wavelength shift of 0.02u2009nm/°C. The athermal synchronization approach reported here is not limited to microring filters but can be applied to any Si3N4 filter with integrated lasers using rare earth ion doped Al2O3 as a gain medium to achieve system-level temperature control free operation.
optical fiber communication conference | 2016
Christopher V. Poulton; David B. Cole; Ami Yaacobi; Michael R. Watts
Frequency-modulated continuous-wave LIDAR is demonstrated with a silicon photonic device consisting of transmitting and receiving waveguides and photodetectors. A 20 mm resolution and 2 m range is shown. Simultaneous distance and velocity measurements are achieved.
Advanced Photonics 2016 (IPR, NOMA, Sensors, Networks, SPPCom, SOF) (2016), paper IW1B.2 | 2016
Christopher V. Poulton; Ami Yaccobi; Zhan Su; Matthew J. Byrd; Michael R. Watts
An optical phased array with a record spot size of 0.85°×0.18° and steering range of 46°×36° is demonstrated. Grouped cascaded phase shifters are utilized. Beam powers of 1mW and a free-space data link are achieved.
Optics Letters | 2017
Manan Raval; Christopher V. Poulton; Michael R. Watts
We demonstrate millimeter-scale optical waveguide grating antennas with unidirectional emission for integrated optical phased arrays. Unidirectional emission eliminates the fundamental problem of blind spots in the element factor of a phased array caused by reflections of antenna radiation within the substrate. Over 90% directionality is demonstrated using a design consisting of two silicon nitride layers. Furthermore, the perturbation strength along the antenna is apodized to achieve uniform emission for the first time, to the best of our knowledge, on a millimeter scale. This allows for a high effective aperture and receiving efficiency. The emission profile of the measured 3xa0mm long antenna has a standard deviation of 8.65% of the mean. These antennas are state of the art and will allow for integrated optical phased arrays with blind-spot-free high transmission output power and high receiving efficiency for LIDAR and free-space communication systems.
Integrated Photonics Research, Silicon and Nanophotonics | 2015
Jerry Zhou; Jie Sun; Ami Yaacobi; Christopher V. Poulton; Michael R. Watts
We demonstrate the design of optical phased arrays that emit 3D holograms. The design concept utilizes back propagation of desired image planes superimposed at the phased array. Improvements are shown utilizing random curved phase fronts.
Optics Express | 2018
Nanxi Li; Diedrik Vermeulen; Zhan Su; Emir Salih Magden; Ming Xin; Neetesh Singh; Alfonso Ruocco; Jelena Notaros; Christopher V. Poulton; Erman Timurdogan; Christopher Baiocco; Michael R. Watts
A tunable laser source is a crucial photonic component for many applications, such as spectroscopic measurements, wavelength division multiplexing (WDM), frequency-modulated light detection and ranging (LIDAR), and optical coherence tomography (OCT). In this article, we demonstrate the first monolithically integrated erbium-doped tunable laser on a complementary-metal-oxide-semiconductor (CMOS)-compatible silicon photonics platform. Erbium-doped Al2O3 sputtered on top is used as a gain medium to achieve lasing. The laser achieves a tunability from 1527 nm to 1573 nm, with a >40 dB side mode suppression ratio (SMSR). The wide tuning range (46 nm) is realized with a Vernier cavity, formed by two Si3N4 microring resonators. With 107 mW on-chip 980 nm pump power, up to 1.6 mW output lasing power is obtained with a 2.2% slope efficiency. The maximum output power is limited by pump power. Fine tuning of the laser wavelength is demonstrated by using the gain cavity phase shifter. Signal response times are measured to be around 200 μs and 35 µs for the heaters used to tune the Vernier rings and gain cavity longitudinal mode, respectively. The linewidth of the laser is 340 kHz, measured via a self-delay heterodyne detection method. Furthermore, the laser signal is stabilized by continuous locking to a mode-locked laser (MLL) over 4900 seconds with a measured peak-to-peak frequency deviation below 10 Hz.
Nature Communications | 2018
Emir Salih Magden; Nanxi Li; Manan Raval; Christopher V. Poulton; Alfonso Ruocco; Neetesh Singh; Diedrik Vermeulen; Erich P. Ippen; Leslie A. Kolodziejski; Michael R. Watts
Many optical systems require broadband filters with sharp roll-offs for efficiently splitting or combining light across wide spectra. While free space dichroic filters can provide broadband selectivity, on-chip integration of these high-performance filters is crucial for the scalability of photonic applications in multi-octave interferometry, spectroscopy, and wideband wavelength-division multiplexing. Here we present the theory, design, and experimental characterization of integrated, transmissive, 1u2009×u20092 port dichroic filters using spectrally selective waveguides. Mode evolution through adiabatic transitions in the demonstrated filters allows for single cutoff and flat-top responses with low insertion losses and octave-wide simulated bandwidths. Filters with cutoffs around 1550 and 2100u2009nm are fabricated on a silicon-on-insulator platform with standard complementary metal-oxide-semiconductor processes. A filter roll-off of 2.82u2009dBu2009nm−1 is achieved while maintaining ultra-broadband operation. This new class of nanophotonic dichroic filters can lead to new paradigms in on-chip communications, sensing, imaging, optical synthesis, and display applications.Optical filters are an integral part of many optical devices and circuits. Here, Magden et al. use a design based on mode evolution to demonstrate CMOS-compatible dichroic filters with more than an octave bandwidth, sharp roll-off and transmissive short- and long-wavelength outputs