Christos Melios

Carrier type inversion in quasi-free standing graphene: studies of local electronic and structural properties

We investigate the local surface potential and Raman characteristics of as-grown and ex-situ hydrogen intercalated quasi-free standing graphene on 4H-SiC(0001) grown by chemical vapor deposition. Upon intercalation, transport measurements reveal a change in the carrier type from n- to p-type, accompanied by a more than three-fold increase in carrier mobility, up to μh ≈ 4540 cm2 V−1 s−1. On a local scale, Kelvin probe force microscopy provides a complete and detailed map of the surface potential distribution of graphene domains of different thicknesses. Rearrangement of graphene layers upon intercalation to (n + 1)LG, where n is the number of graphene layers (LG) before intercalation, is demonstrated. This is accompanied by a significant increase in the work function of the graphene after the H2-intercalation, which confirms the change of majority carriers from electrons to holes. Raman spectroscopy and mapping corroborate surface potential studies.

Excitonic Effects in Tungsten Disulfide Monolayers on Two-Layer Graphene

Light emission in atomically thin heterostructures is known to depend on the type of materials and the number and stacking sequence of the constituent layers. Here we show that the thickness of a two-dimensional substrate can be crucial in modulating the light emission. We study the layer-dependent charge transfer in vertical heterostructures built from monolayer tungsten disulfide (WS2) on one- and two-layer epitaxial graphene, unravelling the effect that the interlayer electronic coupling has on the excitonic properties of such heterostructures. We bring evidence that the excitonic properties of WS2 can be effectively tuned by the number of supporting graphene layers. Integrating WS2 monolayers with two-layer graphene leads to a significant enhancement of the photoluminescence response, up to 1 order of magnitude higher compared to WS2 supported on one-layer graphene. Our findings highlight the importance of substrate engineering when constructing atomically thin-layered heterostructures.

Water on graphene: review of recent progress

The sensitivity of graphene to the surrounding environment is given by its {\pi} electrons, which are directly exposed to molecules in the ambient. The high sensitivity of graphene to the local environment has shown to be both advantageous but also problematic for graphene-based devices, such as transistors and sensors, where the graphene carrier concentration and mobility change due to ambient humidity variations. In this review, recent progress in understanding the effects of water on different types of graphene, grown epitaxially and quasi-free standing on SiC, by chemical vapour deposition on SiO2, as well as exfoliated flakes, are presented. It is demonstrated that water withdraws electrons from graphene, but the graphene-water interaction highly depends on the thickness, layer stacking, underlying substrate and substrate-induced doping. Moreover, we highlight the importance of clear and unambiguous description of the environmental conditions (i.e. relative humidity) whenever a routine characterisation for carrier concentration and mobility is reported (often presented as a simple figure-of-merit), as these electrical characteristics are highly dependent on the adsorbed molecules and the surrounding environment.

Tuning epitaxial graphene sensitivity to water by hydrogen intercalation

The effects of humidity on the electronic properties of quasi-free standing one layer graphene (QFS 1LG) are investigated via simultaneous magneto-transport in the van der Pauw geometry and local work function measurements in a controlled environment. QFS 1LG on 4H-SiC(0001) is obtained by hydrogen intercalation of the interfacial layer. In this system, the carrier concentration experiences a two-fold increase in sensitivity to changes in relative humidity as compared to the as-grown epitaxial graphene. This enhanced sensitivity to water is attributed to the lowering of the hydrophobicity of QFS 1LG, which results from spontaneous polarization of 4H-SiC(0001) strongly influencing the graphene. Moreover, the superior carrier mobility of the QFS 1LG system is retained even at the highest humidity. The work function maps constructed from Kelvin probe force microscopy also revealed higher sensitivity to water for 1LG compared to 2LG in both QFS 1LG and as-grown systems. These results point to a new field of applications for QFS 1LG, i.e., as humidity sensors, and the corresponding need for metrology in calibration of graphene-based sensors and devices.

Characterization and physical modeling of MOS capacitors in epitaxial graphene monolayers and bilayers on 6H-SiC

Capacitance voltage (CV) measurements are performed on planar MOS capacitors with an Al2O3 dielectric fabricated in hydrogen intercalated monolayer and bilayer graphene grown on 6H-SiC as a function of frequency and temperature. Quantitative models of the CV data are presented in conjunction with the measurements in order to facilitate a physical understanding of graphene MOS systems. An interface state density of order 2 . 10(12)eV(-1)cm(-2) is found in both material systems. Surface potential fluctuations of order 80-90meV are also assessed in the context of measured data. In bilayer material, a narrow bandgap of 260meV is observed consequent to the spontaneous polarization in the substrate. Supporting measurements of material anisotropy and temperature dependent hysteresis are also presented in the context of the CV data and provide valuable insight into measured and modeled data. The methods outlined in this work should be applicable to most graphene MOS systems.

Detection of Ultralow Concentration NO2 in Complex Environment Using Epitaxial Graphene Sensors

We demonstrate proof-of-concept graphene sensors for environmental monitoring of ultralow concentration NO2 in complex environments. Robust detection in a wide range of NO2 concentrations, 10-154 ppb, was achieved, highlighting the great potential for graphene-based NO2 sensors, with applications in environmental pollution monitoring, portable monitors, automotive and mobile sensors for a global real-time monitoring network. The measurements were performed in a complex environment, combining NO2/synthetic air/water vapor, traces of other contaminants, and variable temperature in an attempt to fully replicate the environmental conditions of a working sensor. It is shown that the performance of the graphene-based sensor can be affected by coadsorption of NO2 and water on the surface at low temperatures (≤70 °C). However, the sensitivity to NO2 increases significantly when the sensor operates at 150 °C and the cross-selectivity to water, sulfur dioxide, and carbon monoxide is minimized. Additionally, it is demonstrated that single-layer graphene exhibits two times higher carrier concentration response upon exposure to NO2 than bilayer graphene.