Chunya Wang

Carbonized Silk Fabric for Ultrastretchable, Highly Sensitive, and Wearable Strain Sensors

A carbonized plain-weave silk fabric is fabricated into wearable and robust strain sensors, which can be stretched up to 500% and show high sensitivity in a wide strain range. This sensor can be assembled into wearable devices for detection of both large and subtle human activities, showing great potential for monitoring human motions and personal health.

Air Filtration in the Free Molecular Flow Regime: A Review of High-Efficiency Particulate Air Filters Based on Carbon Nanotubes

Air filtration in the free molecular flow (FMF) regime is important and challenging because a higher filtration efficiency and lower pressure drop are obtained when the fiber diameter is smaller than the gas mean free path in the FMF regime. In previous studies, FMF conditions have been obtained by increasing the gas mean free path through reducing the pressure and increasing the temperature. In the case of carbon nanotubes (CNTs) with nanoscale diameters, it is possible to filtrate in the FMF regime under normal conditions. This paper reviews recent progress in theoretical and experimental studies of air filtration in the FMF regime. Typical structure models of high-efficiency particulate (HEPA) air filters based on CNTs are introduced. The pressure drop in air filters operated in the FMF regime is less than that predicted by the conventional air filtration theory. The thinnest HEPA filters fabricated from single-walled CNT films have an extremely low pressure drop. CNT air filters with a gradient nanostructure are shown to give a much better filtration performance in dynamic filtration. CNT air filters with a hierarchical structure and an agglomerated CNT fluidized bed air filter are also introduced. Finally, the challenges and opportunities for the application of CNTs in air filtration are discussed.

Sheath–Core Graphite/Silk Fiber Made by Dry-Meyer-Rod-Coating for Wearable Strain Sensors

Recent years have witnessed the explosive development of flexible strain sensors. Nanomaterials have been widely utilized to fabricate flexible strain sensors, because of their high flexibility and electrical conductivity. However, the fabrication processes for nanomaterials and the subsequent strain sensors are generally complicated and are manufactured at high cost. In this work, we developed a facile dry-Meyer-rod-coating process to fabricate sheath-core-structured single-fiber strain sensors using ultrafine graphite flakes as the sheath and silk fibers as the core by virtue of their flexibility, high production, and low cost. The fabricated strain sensor exhibits a high sensitivity with a gauge factor of 14.5 within wide workable strain range up to 15%, and outstanding stability (up to 3000 cycles). The single-fiber-based strain sensors could be attached to a human body to detect joint motions or easily integrated into the multidirectional strain sensor for monitoring multiaxial strain, showing great potential applications as wearable strain sensors.

Silk nanofibers as high efficient and lightweight air filter

Silk is a widely available, edible, biocompatible, and environmentally sustainable natural material. Particulate matter (PM) pollution has drawn considerable attention because it is a serious threat to public health. Herein, we report a human-friendly silk nanofiber air filter, which exhibits superior filtration efficiency for both PM2.5 and submicron particles with obviously low pressure drop and low basis weight compared to typical commercial microfiber air filters. Additionally, other functions such as antibacterial activity could be easily integrated into the silk nanofiber air filters, enabling the fabrication of multifunctional air filters. All the above characteristics, combined with the natural abundance and biocompatibility of silk, suggest a great potential for the use of silk nanofibers as air filters, especially as comfortable and personal air purifiers.

Carbonized silk georgette as an ultrasensitive wearable strain sensor for full-range human activity monitoring

The increasing demand of wearable electronic devices has promoted the development of high-performance flexible strain sensors which could monitor various physiological parameters. In this work, using silk georgette, which is a commercially available gauzy and lightweight fabric composed of highly twisted yarns in both warp and weft directions as the raw material, an ultrasensitive strain sensor with a wide workable strain range is fabricated through a facile and large-scale process. The obtained strain sensors exhibit remarkable combined features of ultrahigh sensitivity in a wide sensing range (average gauge factor of 29.7 within 40% strain and of 173.0 for a strain of 60–100%), ultralow detection limit (0.01% strain), high durability and stability (10 000 stretching cycles at 100% strain), fast response (<70 ms) and translucence, which could be ascribed to the unique woven structure of silk georgette. Furthermore, the dependence of the performance of the strain sensors on the woven structures has been demonstrated. Finally, the strain sensors based on silk georgette are demonstrated to show potential for applications in monitoring full-range human activities including both vigorous motions and subtle motions.

Extremely Black Vertically Aligned Carbon Nanotube Arrays for Solar Steam Generation

The unique structure of a vertically aligned carbon nanotube (VACNT) array makes it behave most similarly to a blackbody. It is reported that the optical absorptivity of an extremely black VACNT array is about 0.98-0.99 over a large spectral range of 200 nm-200 μm, inspiring us to explore the performance of VACNT arrays in solar energy harvesting. In this work, we report the highly efficient steam generation simply by laminating a layer of VACNT array on the surface of water to harvest solar energy. It is found that under solar illumination the temperature of upper water can significantly increase with obvious water steam generated, indicating the efficient solar energy harvesting and local temperature rise by the thin layer of VACNTs. We found that the evaporation rate of water assisted by VACNT arrays is 10 times that of bare water, which is the highest ratio for solar-thermal-steam generation ever reported. Remarkably, the solar thermal conversion efficiency reached 90%. The excellent performance could be ascribed to the strong optical absorption and local temperature rise induced by the VACNT layer, as well as the ultrafast water transport through the VACNT layer due to the frictionless wall of CNTs. Based on the above, we further demonstrated the application of VACNT arrays in solar-driven desalination.

Intrinsically Stretchable and Conductive Textile by a Scalable Process for Elastic Wearable Electronics

The prosperous development of stretchable electronics poses a great demand on stretchable conductive materials that could maintain their electrical conductivity under tensile strain. Previously reported strategies to obtain stretchable conductors usually involve complex structure-fabricating processes or utilization of high-cost nanomaterials. It remains a great challenge to produce stretchable and conductive materials via a scalable and cost-effective process. Herein, a large-scalable pyrolysis strategy is developed for the fabrication of intrinsically stretchable and conductive textile in utilizing low-cost and mass-produced weft-knitted textiles as raw materials. Due to the intrinsic stretchability of the weft-knitted structure and the excellent mechanical and electrical properties of the as-obtained carbonized fibers, the obtained flexible and durable textile could sustain tensile strains up to 125% while keeping a stable electrical conductivity (as shown by a Modal-based textile), thus ensuring its applications in elastic electronics. For demonstration purposes, stretchable supercapacitors and wearable thermal-therapy devices that showed stable performance with the loading of tensile strains have been fabricated. Considering the simplicity and large scalability of the process, the low-cost and mass production of the raw materials, and the superior performances of the as-obtained elastic and conductive textile, this strategy would contribute to the development and industrial production of wearable electronics.

Hierarchical carbon-nanotube/quartz-fiber films with gradient nanostructures for high efficiency and long service life air filters

Hierarchical and gradient nanostructures are important to exploit the full potential of nanofibers in filtration applications. The introduction of a gradient into carbon nanotube (CNT)/fiber hierarchical structures could result in a change of the particle capturing properties. Here, we show the fabrication of hierarchical carbon nanotube (CNT)/quartz-fiber (QF) filters with gradient nanostructures where the content of CNTs decreases exponentially along the thickness direction of the filters. The loading of catalysts for the growth of CNTs in the QF filter has been achieved using an aerosol technique, which can be carried out on a large-scale. With only 1.17 wt% CNT, the penetration of the CNT/QF filter at the most penetrating particle size (MPPS) has been reduced by one order of magnitude, while the pressure drop only increases about 6% with respect to that of the pristine QF filter, leading to an obvious higher quality factor (Qf) for the CNT/QF filter. More importantly, the service life of the CNT/QF filter with the CNT-rich side downstream has increased by 64% when compared with the pristine QF filter. In contrast, when the CNT-rich side is placed upstream, the service life of CNT/QF filter is only 41.7% of that observed when placing the CNT-rich side downstream. Scanning electron microscopy (SEM) images reveal that the gradient nanostructure of the CNT/QF filter, together with the CNT/QF hierarchical structure play very important roles in the simultaneous enhancement of the filtration efficiency and the service life of the air filters.

An All-Silk-Derived Dual-Mode E-skin for Simultaneous Temperature–Pressure Detection

Flexible skin-mimicking electronics are highly desired for development of smart human-machine interfaces and wearable human-health monitors. Human skins are able to simultaneously detect different information, such as touch, friction, temperature, and humidity. However, due to the mutual interferences of sensors with different functions, it is still a big challenge to fabricate multifunctional electronic skins (E-skins). Herein, a combo temperature-pressure E-skin is reported through assembling a temperature sensor and a strain sensor in both of which flexible and transparent silk-nanofiber-derived carbon fiber membranes (SilkCFM) are used as the active material. The temperature sensor presents high temperature sensitivity of 0.81% per centigrade. The strain sensor shows an extremely high sensitivity with a gauge factor of ∼8350 at 50% strain, enabling the detection of subtle pressure stimuli that induce local strain. Importantly, the structure of the SilkCFM in each sensor is designed to be passive to other stimuli, enabling the integrated E-skin to precisely detect temperature and pressure at the same time. It is demonstrated that the E-skin can detect and distinguish exhaling, finger pressing, and spatial distribution of temperature and pressure, which cannot be realized using single mode sensors. The remarkable performance of the silk-based combo temperature-pressure sensor, together with its green and large-scalable fabrication process, promising its applications in human-machine interfaces and soft electronics.

CVD growth of fingerprint-like patterned 3D graphene film for an ultrasensitive pressure sensor

With the rapid development of wearable devices, flexible pressure sensors with high sensitivity and wide workable range are highly desired. In nature, there are many well-adapted structures developed through natural selection, which inspired us for the design of biomimetic materials or devices. Particularly, human fingertip skin, where many epidermal ridges amplify external stimulations, might be a good example to imitate for highly sensitive sensors. In this work, based on unique chemical vapor depositions (CVD)-grown 3D graphene films that mimic the morphology of fingertip skin, we fabricated flexible pressure sensing membranes, which simultaneously showed a high sensitivity of 110 (kPa)−1 for 0–0.2 kPa and wide workable pressure range (up to 75 kPa). Hierarchical structured PDMS films molded from natural leaves were used as the supporting elastic films for the graphene films, which also contribute to the superior performance of the pressure sensors. The pressure sensor showed a low detection limit (0.2 Pa), fast response (< 30 ms), and excellent stability for more than 10,000 loading/unloading cycles. Based on these features, we demonstrated its applications in detecting tiny objects, sound, and human physiological signals, showing its potential in wearable electronics for health monitoring and human/machine interfaces.