Claire Dumas

Pretreatment methods to improve sludge anaerobic degradability: a review.

This paper presents a review of the main sludge treatment techniques used as a pretreatment to anaerobic digestion. These processes include biological (largely thermal phased anaerobic), thermal hydrolysis, mechanical (such as ultrasound, high pressure and lysis), chemical with oxidation (mainly ozonation), and alkali treatments. The first three are the most widespread. Emphasis is put on their impact on the resulting sludge properties, on the potential biogas (renewable energy) production and on their application at industrial scale. Thermal biological provides a moderate performance increase over mesophilic digestion, with moderate energetic input. Mechanical treatment methods are comparable, and provide moderate performance improvements with moderate electrical input. Thermal hydrolysis provides substantial performance increases, with a substantial consumption of thermal energy. It is likely that low impact pretreatment methods such as mechanical and thermal phased improve speed of degradation, while high impact methods such as thermal hydrolysis or oxidation improve both speed and extent of degradation. While increased nutrient release can be a substantial cost in enhanced sludge destruction, it also offers opportunities to recover nutrients from a concentrated water stream as mineral fertiliser.

Lignocellulosic materials into biohydrogen and biomethane: impact of structural features and pretreatment.

Production of energy from lignocellulosic biomass or residues is receiving ever-increasing interest. Among the different processes, dark fermentation for producing biohydrogen and anaerobic digestion for producing biomethane present considerable advantages. However, they are limited by the accessibility of holocelluloses that are embedded in the lignin network. The authors propose a review of works on the conversion of biomass into biohydrogen and biomethane with the comprehensive description of (a) biomass composition and features that may impact on its anaerobic conversion and (b) the impact of different kinds of pretreatment on these features and on the performance of biohydrogen and methane production.

Total solids content drives high solid anaerobic digestion via mass transfer limitation

The role of the total solids (TS) content on anaerobic digestion was investigated in batch reactors. A range of TS contents from 10% to 35% was evaluated, four replicates were performed. The total methane production slightly decreased with TS concentrations increasing from 10% to 25% TS. Two behaviors were observed at 30% TS: two replicates had similar performances to that at 25% TS; for the two other replicates, the methane production was inhibited as observed at 35% TS. This difference suggested that 30% TS content corresponded to a threshold of the solids content, above which methanogenesis was strongly inhibited. The Anaerobic Digestion Model No. 1 (ADM1) was used to describe the experimental data. The effects of hydrolysis step and liquid/gas mass transfer were particularly investigated. The simulations showed that mass transfer limitation could explain the low methane production at high TS, and that hydrolysis rate constants slightly decreased with increasing TS.

Checking graphite and stainless anodes with an experimental model of marine microbial fuel cell.

A procedure was proposed to mimic marine microbial fuel cell (MFC) in liquid phase. A graphite anode and a stainless steel cathode which have been proven, separately, to be efficient in MFC were investigated. A closed anodic compartment was inoculated with sediments, filled with deoxygenated seawater and fed with milk to recover the sediments sulphide concentration. A stainless steel cathode, immersed in aerated seawater, used the marine biofilm formed on its surface to catalyze oxygen reduction. The cell implemented with a 0.02m(2)-graphite anode supplied around 0.10W/m(2) for 45 days. A power of 0.02W/m(2) was obtained after the anode replacement by a 0.06m(2)-stainless steel electrode. The cell lost its capacity to make a motor turn after one day of operation, but recovered its full efficiency after a few days in open circuit. The evolution of the kinetic properties of stainless steel was identified as responsible for the power limitation.

Dynamic effect of total solid content, low substrate/inoculum ratio and particle size on solid-state anaerobic digestion

Among all the process parameters of solid-state anaerobic digestion (SS-AD), total solid content (TS), inoculation (S/X ratio) and size of the organic solid particles can be optimized to improve methane yield and process stability. To evaluate the effects of each parameter and their interactions on methane production, a three level Box-Behnken experimental design was implemented in SS-AD batch tests degrading wheat straw by adjusting: TS content from 15% to 25%, S/X ratio (in volatile solids) between 28 and 47 and particle size with a mean diameter ranging from 0.1 to 1.4mm. A dynamic analysis of the methane production indicates that the S/X ratio has only an effect during the start-up phase of the SS-AD. During the growing phase, TS content becomes the main parameter governing the methane production and its strong interaction with the particle size suggests the important role of water compartmentation on SS-AD.

French Brittany macroalgae screening: composition and methane potential for potential alternative sources of energy and products.

Macroalgae are biomass resources that represent a valuable feedstock to be used entirely for human consumption or for food additives after some extractions (mainly colloids) and/or for energy production. In order to better develop the algal sector, it is important to determine the capacity of macroalgae to produce these added-values molecules for food and/or for energy industries on the basis of their biochemical characteristics. In this study, ten macroalgae obtained from French Brittany coasts (France) were selected. The global biochemical composition (proteins, lipids, carbohydrates, fibers), the presence and characteristics of added-values molecules (alginates, polyphenols) and the biochemical methane potential of these algae were determined. Regarding its biochemical composition, Palmaria palmata is interesting for food (rich in nutrients) and for anaerobic digestion (0.279 LCH4/gVS). Saccharina latissima could be used for alginate extraction (242 g/kgTS, ratio between mannuronic and guluronic acid M/G=1.4) and Sargassum muticum for polyphenol extraction (19.8 g/kgTS).

Total solids content: a key parameter of metabolic pathways in dry anaerobic digestion.

BackgroundIn solid-state anaerobic digestion (AD) bioprocesses, hydrolytic and acidogenic microbial metabolisms have not yet been clarified. Since these stages are particularly important for the establishment of the biological reaction, better knowledge could optimize the process performances by process parameters adjustment.ResultsThis study demonstrated the effect of total solids (TS) content on microbial fermentation of wheat straw with six different TS contents ranging from wet to dry conditions (10 to 33% TS). Three groups of metabolic behaviors were distinguished based on wheat straw conversion rates with 2,200, 1,600, and 1,400 mmol.kgVS-1 of fermentative products under wet (10 and 14% TS), dry (19 to 28% TS), and highly dry (28 to 33% TS) conditions, respectively. Furthermore, both wet and dry fermentations showed acetic and butyric acid metabolisms, whereas a mainly butyric acid metabolism occurred in highly dry fermentation.ConclusionSubstrate conversion was reduced with no changes of the metabolic pathways until a clear limit at 28% TS content, which corresponded to the threshold value of free water content of wheat straw. This study suggested that metabolic pathways present a limit of TS content for high-solid AD.

Microbial community signature of high-solid content methanogenic ecosystems

In this study, changes in bacterial and archaeal communities involved in anaerobic digestion processes operated with high solid contents were investigated. Batch tests were performed within a range of total solids (TS) of 10-35%. Between 10% and 25% TS, high methanogenic activity was observed and no overall specific structure of active bacterial communities was found. At 30% and 35%, methanogenesis was inhibited as a consequence of volatile fatty acids accumulation. Here, a specific bacterial signature was observed with three main dominant bacteria related to Clostridium sp., known for their ability to grow at low pH. Additionally, archaeal community was gradually impacted by TS content. Three archaeal community structures were observed with a gradual shift from Methanobacterium sp. to Methanosarcina sp., according to the TS content. Overall, several species were identified as biomarkers of methanogenesis inhibition, since bacterial and archaeal communities were highly specific at high TS contents.

Substrate milling pretreatment as a key parameter for Solid-State Anaerobic Digestion optimization

The effect of milling pretreatment on performances of Solid-State Anaerobic Digestion (SS-AD) of raw lignocellulosic residue is still controverted. Three batch reactors treating different straw particle sizes (milled 0.25 mm, 1 mm and 10 mm) were followed during 62 days (6 sampling dates). Although a fine milling improves substrate accessibility and conversion rate (up to 30% compared to coarse milling), it also increases the risk of media acidification because of rapid and high acids production during fermentation of the substrate soluble fraction. Meanwhile, a gradual adaptation of microbial communities, were observed according to both reaction progress and methanogenic performances. The study concluded that particle size reduction affected strongly the performances of the reaction due to an increase of substrate bioaccessibility. An optimization of SS-AD processes thanks to particle size reduction could therefore be applied at farm or industrial scale only if a specific management of the soluble compounds is established.

Total solid content drives hydrogen production through microbial selection during thermophilic fermentation

In this study, the effect of total solid content (TS) on thermophilic hydrogen production from wheat straw was investigated. Six TS contents ranging from wet to dry conditions (10-34%TS) were tested in batch tests. A decrease of H₂ yields was observed and three statistical groups were distinguished according to the TS content: wet conditions (10% and 14%TS) with 15.3 ± 1.6 NmlH₂ gTS(-1), intermediate conditions (19%TS) with 6.4 ± 1.0 NmlH₂ gTS(-1) and dry conditions (25-34%TS) with 3.4 ± 0.8 NmlH₂ gTS(-1). Such a decrease in biohydrogen yields was related to a metabolic shift with an accumulation of lactic acid under dry conditions. Concomitantly, a microbial population shift was observed with a dominance of species related to the class Clostridia under wet conditions, and a co-dominance of members of Bacilli, Clostridia classes and Bacteroidetes phylum under dry conditions.