Colette L. Heald

A large organic aerosol source in the free troposphere missing from current models

average 4 m gs m 3 in the 2–6.5 km column with little vertical gradient. These values are 10–100 times higher than computed with a global chemical transport model (CTM) including a standard 2-product simulation of secondary organic aerosol (SOA) formation based on empirical fits to smog chamber data. The same CTM reproduces the observed vertical profiles of sulfate and elemental carbon aerosols, which indicate sharp decreases from the boundary layer to the FT due to wet scavenging. Our results suggest a large, sustained source of SOA in the FT from oxidation of long-lived volatile organic compounds. We find that this SOA is the dominant component of aerosol mass in the FT, with implications for intercontinental pollution transport and radiative forcing of climate. Citation: Heald, C. L., D. J. Jacob, R. J. Park, L. M. Russell, B. J. Huebert, J. H. Seinfeld, H. Liao, and R. J. Weber (2005), A large organic aerosol source in the free troposphere missing from current models, Geophys. Res. Lett., 32, L18809, doi:10.1029/2005GL023831.

Predicted change in global secondary organic aerosol concentrations in response to future climate, emissions, and land use change

[1] The sensitivity of secondary organic aerosol (SOA) concentration to changes in climate and emissions is investigated using a coupled global atmosphere-land model driven by the year 2100 IPCC A1B scenario predictions. The Community Atmosphere Model (CAM3) is updated with recent laboratory determined yields for SOA formation from monoterpene oxidation, isoprene photooxidation and aromatic photooxidation. Biogenic emissions of isoprene and monoterpenes are simulated interactively using the Model of Emissions of Gases and Aerosols (MEGAN2) within the Community Land Model (CLM3). The global mean SOA burden is predicted to increase by 36% in 2100, primarily the result of rising biogenic and anthropogenic emissions which independently increase the burden by 26% and 7%. The later includes enhanced biogenic SOA formation due to increased emissions of primary organic aerosol (5–25% increases in surface SOA concentrations in 2100). Climate change alone (via temperature, removal rates, and oxidative capacity) does not change the global mean SOA production, but the global burden increases by 6%. The global burden of anthropogenic SOA experiences proportionally more growth than biogenic SOA in 2100 from the net effect of climate and emissions (67% increase predicted). Projected anthropogenic land use change for 2100 (A2) is predicted to reduce the global SOA burden by 14%, largely the result of cropland expansion. South America is the largest global source region for SOA in the present day and 2100, but Asia experiences the largest relative growth in SOA production by 2100 because of the large predicted increases in Asian anthropogenic aromatic emissions. The projected decrease in global sulfur emissions implies that SOA will contribute a progressively larger fraction of the global aerosol burden.

Inverting for emissions of carbon monoxide from Asia using aircraft observations over the western Pacific

emission estimates of carbon monoxide (CO) from Asia. A priori emissions and their errors are from a customized bottom-up Asian emission inventory for the TRACE-P period. The global three-dimensional GEOS-CHEM chemical transport model (CTM) is used as the forward model. The CTM transport error (20–30% of the CO concentration) is quantified from statistics of the difference between the aircraft observations of CO and the forward model results with a priori emissions, after removing the mean bias which is attributed to errors in the a priori emissions. Additional contributions to the error budget in the inverse analysis include the representation error (typically 5% of the CO concentration) and the measurement accuracy (’2% of the CO concentration). We find that the inverse model can usefully constrain five sources: Chinese fuel consumption, Chinese biomass burning, total emissions from Korea and Japan, total emissions from Southeast Asia, and the ensemble of all other sources. The inversion indicates a 54% increase in anthropogenic emissions from China (to 168 Tg CO yr � 1 ) relative to the a priori; this value is still much lower than had been derived in previous inversions using the CMDL network of surface observations. A posteriori emissions of biomass burning in Southeast Asia and China are much lower than a priori estimates. INDEX TERMS: 0322 Atmospheric Composition and Structure: Constituent sources and sinks; 0345 Atmospheric Composition and Structure: Pollution—urban and regional (0305); 0365 Atmospheric Composition and Structure: Troposphere—composition and chemistry; 0368 Atmospheric Composition and Structure: Troposphere—constituent transport and chemistry; KEYWORDS: inverse, Asian emissions, carbon monoxide

Biogenic carbon and anthropogenic pollutants combine to form a cooling haze over the southeastern United States

Remote sensing data over North America document the ubiquity of secondary aerosols resulting from a combination of primary biogenic and anthropogenic emissions. The spatial and temporal distribution of aerosol optical thickness (AOT) over the southeastern United States cannot be explained by anthropogenic aerosols alone, but is consistent with the spatial distribution, seasonal distribution, and temperature dependence of natural biogenic volatile organic compound (BVOC) emissions. These patterns, together with observations of organic aerosol in this region being dominated by modern 14C and BVOC oxidation products with summer maxima, indicate nonfossil fuel origins and strongly suggest that the dominant summer AOT signal is caused by secondary aerosol formed from BVOC oxidation. A link between anthropogenic and biogenic emissions forming secondary aerosols that dominate the regional AOT is supported by reports of chemicals in aerosols formed by BVOC oxidation in a NOx- and sulfate-rich environment. Even though ground-based measurements from the IMPROVE network suggest higher sulfate than organic concentrations near the surface in this region, we infer that much of the secondary organic aerosol in the Southeast must occur above the surface layer, consistent with reported observations of the organic fraction of the total aerosol increasing with height and models of the expected vertical distribution of secondary organic aerosols from isoprene oxidation. The observed AOT is large enough in summer to provide regional cooling; thus we conclude that this secondary aerosol source is climatically relevant with significant potential for a regional negative climate feedback as BVOC emissions increase with temperature.

Sources and properties of Amazonian aerosol particles

This review provides a comprehensive account of what is known presently about Amazonian aerosol particles and concludes by formulating outlook and priorities for further research. The review is organized to follow the life cycle of Amazonian aerosol particles. It begins with a discussion of the primary and secondary sources relevant to the Amazonian particle burden, followed by a presentation of the particle properties that characterize the mixed populations present over the Amazon Basin at different times and places. These properties include number and mass concentrations and distributions, chemical composition, hygroscopicity, and cloud nucleation ability. The review presents Amazonian aerosol particles in the context of natural compared to anthropogenic sources as well as variability with season and meteorology. This review is intended to facilitate an understanding of the current state of knowledge on Amazonian aerosol particles specifically and tropical continental aerosol particles in general and thereby to enhance future research in this area. Copyright

Ozone production in transpacific Asian pollution plumes and implications for ozone air quality in California

[1] We examine the ozone production efficiency in transpacific Asian pollution plumes, and the implications for ozone air quality in California, by using aircraft and surface observations in April–May 2002 from the Intercontinental Transport and Chemical Transformation 2002 (ITCT 2K2) campaign off the California coast and the Pacific Exploration of Asian Continental Emission–B (PEACE-B) campaign over the northwest Pacific. The observations are interpreted with a global three-dimensional chemical transport model (GEOS-CHEM). The model reproduces the mean features observed for CO, reactive nitrogen oxides (NOy), and ozone but underestimates the strong (20 ppbv) stratospheric contribution to ozone in the middle troposphere. The ITCT 2K2 aircraft sampled two major transpacific Asian pollution plumes, one on 5 May at 5–8 km altitude with CO up to 275 ppbv but no elevated ozone and one on 17 May at 2.5–4 km altitude with CO up to 225 ppbv and ozone up to 90 ppbv. We show that the elevated ozone in the latter plume is consistent with production from peroxyacetylnitrate (PAN) decomposition during subsidence of the plume over the northeast Pacific. This production is particularly efficient because of the strong radiation and low humidity of the subsiding environment. We argue that such PAN decomposition represents a major and possibly dominant component of the ozone enhancement in transpacific Asian pollution plumes. Strong dilution of Asian pollution plumes takes place during entrainment in the U.S. boundary layer, greatly reducing their impact at U.S. surface sites. California mountain sites are more sensitive to Asian pollution because of their exposure to the free troposphere. Model results indicate a mean Asian pollution enhancement of 7 ppbv ozone at Sequoia National Park in May 2002 on those days when the 8-hour average ozone concentration exceeded 80 ppbv. INDEX TERMS: 0368 Atmospheric Composition and Structure: Troposphere—constituent transport and chemistry; 0365 Atmospheric Composition and Structure: Troposphere—composition and chemistry; 0345 Atmospheric Composition and Structure: Pollution—urban and regional (0305); KEYWORDS: ozone, Asian pollution, ITCT 2K2, PEACE-B, transpacific transport

Inventory of boreal fire emissions for North America in 2004: Importance of peat burning and pyroconvective injection

The summer of 2004 was one of the largest fire seasons on record for Alaska and western Canada. We construct a daily bottom-up fire emission inventory for that season, including consideration of peat burning and high-altitude (buoyant) injection, and evaluate it in a global chemical transport model (the GEOS-Chem CTM) simulation of CO through comparison with MOPITT satellite and ICARTT aircraft observations. The inventory is constructed by combining daily area burned reports and MODIS fire hot spots with estimates of fuel consumption and emission factors based on ecosystem type. We estimate the contribution from peat burning using drainage and peat distribution maps for Alaska and Canada; 17% of the reported 5.1 × 106 ha burned were located in peatlands in 2004. Our total estimate of North American fire emissions during the summer of 2004 is 30 Tg CO, including 11 Tg from peat. Including peat burning in the GEOS-Chem simulation improves agreement with MOPITT observations. The long-range transport of fire plumes observed by MOPITT suggests that the largest fires injected a significant fraction of their emissions in the upper troposphere.

Spatial distribution of isoprene emissions from North America derived from formaldehyde column measurements by the OMI satellite sensor

Received 10 May 2007; revised 19 September 2007; accepted 25 October 2007; published 26 January 2008. [1] Space-borne formaldehyde (HCHO) column measurements from the Ozone Monitoring Instrument (OMI), with 13 � 24 km 2 nadir footprint and daily global coverage, provide new constraints on the spatial distribution of biogenic isoprene emission from North America. OMI HCHO columns for June-August 2006 are consistent with measurements from the earlier GOME satellite sensor (1996–2001) but OMI is 2–14% lower. The spatial distribution of OMI HCHO columns follows that of isoprene emission; anthropogenic hydrocarbon emissions are undetectable except in Houston. We develop updated relationships between HCHO columns and isoprene emission from a chemical transport model (GEOS-Chem), and use these to infer top-down constraints on isoprene emissions from the OMI data. We compare the OMI-derived emissions to a state-of-science bottom-up isoprene emission inventory (MEGAN) driven by two land cover databases, and use the results to optimize the MEGAN emission factors (EFs) for broadleaf trees (the main isoprene source). The OMI-derived isoprene emissions in North America (June–August 2006) with 1 � 1 resolution are spatially consistent with MEGAN (R 2 = 0.48–0.68) but are lower (by 4–25% on average). MEGAN overestimates emissions in the Ozarks and the Upper South. A better fit to OMI (R 2 = 0.73) is obtained in MEGAN by using a uniform isoprene EF from broadleaf trees rather than variable EFs. Thus MEGAN may overestimate emissions in areas where it specifies particularly high EFs. Within-canopy isoprene oxidation may also lead to significant differences between the effective isoprene emission to the atmosphere seen by OMI and the actual isoprene emission determined by MEGAN.

Mass spectral characterization of submicron biogenic organic particles in the Amazon Basin

Submicron atmospheric particles in the Amazon Basin were characterized by a high-resolution aerosol mass spectrometer during the wet season of 2008. Patterns in the mass spectra closely resembled those of secondary-organic-aerosol (SOA) particles formed in environmental chambers from biogenic precursor gases. In contrast, mass spectral indicators of primary biological aerosol particles (PBAPs) were insignificant, suggesting that PBAPs contributed negligibly to the submicron fraction of particles during the period of study. For 40% of the measurement periods, the mass spectra indicate that in-Basin biogenic SOA production was the dominant source of the submicron mass fraction, contrasted to other periods (30%) during which out-of-Basin organic-carbon sources were significant on top of the baseline in-Basin processes. The in-Basin periods had an average organic-particle loading of 0.6 mu g m(-3) and an average elemental oxygen-to-carbon (O:C) ratio of 0.42, compared to 0.9 mu g m(-3) and 0.49, respectively, during periods of out-of-Basin influence. On the basis of the data, we conclude that most of the organic material composing submicron particles over the Basin derived from biogenic SOA production, a finding that is consistent with microscopy observations made in a concurrent study. This source was augmented during some periods by aged organic material delivered by long-range transport. Citation: Chen, Q., et al. (2009), Mass spectral characterization of submicron biogenic organic particles in the Amazon Basin, Geophys. Res. Lett., 36, L20806, doi: 10.1029/2009GL039880.

Coupling dry deposition to vegetation phenology in the Community Earth System Model: Implications for the simulation of surface O3

Dry deposition is an important removal process controlling surface ozone. We examine the representation of this ozone loss mechanism in the Community Earth System Model. We first correct the dry deposition parameterization by coupling the leaf and stomatal vegetation resistances to the leaf area index, an omission which has adversely impacted over a decade of ozone simulations using both the Model for Ozone and Related chemical Tracers (MOZART) and Community Atmospheric Model-Chem (CAM-Chem) global models. We show that this correction increases O dry deposition velocities over vegetated regions and improves the simulated seasonality in this loss process. This enhanced removal reduces the previously reported bias in summertime surface O simulated over eastern U.S. and Europe. We further optimize the parameterization by scaling down the stomatal resistance used in the Community Land Model to observed values. This in turn further improves the simulation of dry deposition velocity of O, particularly over broadleaf forested regions. The summertime surface O bias is reduced from 30ppb to 14ppb over eastern U.S. and 13ppb to 5ppb over Europe from the standard to the optimized scheme, respectively. O deposition processes must therefore be accurately coupled to vegetation phenology within 3-D atmospheric models, as a first step toward improving surface O and simulating O responses to future and past vegetation changes. Key Points The dry deposition scheme (Wesely, 1989) is corrected and optimized in CESM Dry deposition velocity and surface O3 simulations are significantly improved Linking deposition to LAI is key to simulate O3 responses to vegetation changes.