Colin R. Bridges

Evidence for the Chain-Growth Synthesis of Statistical π-Conjugated Donor-Acceptor Copolymers

The synthesis of a series of dithienosilole-benzotriazole donor-acceptor statistical copolymers with various donor-acceptor ratios is reported, prepared by Kumada catalyst-transfer polymerization. Statistical copolymer structure is verified by (1) H NMR and optical absorption spectroscopy, and supported by density functional theory (DFT) calculations. The copolymers exhibit a single optical absorption band that lies between dithienosilole and benzotriazole homopolymers, which shifts with varying donor-acceptor content. A chain extension experiment using a partially consumed benzotriazole solution as a macroinitiator followed by addition of dithienosilole leads to the synthesis of a statistical dithienosilole-benzotriazole block copolymer from a pure benzotriazole block, demonstrating that both chain extension and simultaneous monomer incorporation are possible using this methodology.

Synthesis of gold nanotubes with variable wall thicknesses

We report the synthesis of gold nanotubes with variable wall thicknesses that is accomplished by the deposition of sacrificial hydrophobic polymer cores followed by gold shells within an anodic aluminum oxide template. We demonstrate that by varying polymer core hydrophobicity, the resulting gold shell thickness can be varied. There are two requirements for gold shell formation: (1) the polymer core must be able to be electrodeposited into a tubular (as opposed to wire-like) structure, and (2) the polymer must be hydrophobic, such that it collapses upon exposure to an aqueous solution. An array of gold nanotubes has variable plasmonic properties and can function as a surface enhanced Raman spectroscopy substrate.

Evolution of the Electron Mobility in Polymer Solar Cells with Different Fullerene Acceptors

We investigate the evolution of the electron mobility of two different acceptors, [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) and indene-C60 bisadduct (ICBA), in a poly(3-hexylthiophene) blend solar cell during a prolonged thermal aging process. High electron mobility does not correlate with the best device performance in our study of the P3HT:PC71BM and P3HT:ICBA systems. Very little changes are observed in the polymer crystallinity as a function of time. The evolution of the acceptor appears to be the dominant factor that leads to long-term changes in the device performance. The electron mobility evolves differently in PC71BM and ICBA systems, which highlights the importance of the fullerene molecular structure.

Potential-dependent interaction of DOPC liposomes with an octadecanol-covered Au(111) surface investigated using electrochemical methods coupled with in situ fluorescence microscopy.

The potential-controlled incorporation of DOPC liposomes (100 nm diameter) into an adsorbed octadecanol layer on Au(111) was studied using electrochemical and in situ fluorescence microscopy. The adsorbed layer of octadecanol included a small amount of a lipophilic fluorophore-octadecanol modified with BODIPY-to enable fluorescence imaging. The deposited octadecanol layer was found not to allow liposomes to interact unless the potential was less than -0.4 V/SCE, which introduces defects into the adsorbed layer. Small increases in the capacitance of the adsorbed layer were measured after introducing the defects, allowing the liposomes to interact with the defects and then annealing the defects at 0 V/SCE. A change in the adsorbed layer was also signified by a more positive desorption potential for the liposome-modified adsorbed layer as compared to that for an adsorbed layer that was porated in a similar fashion but without liposomes present in the electrolyte. These subtle changes in capacitance are difficult to interpret, so an in situ spectroscopic study was performed to provide a more direct measure of the interaction. The incorporation of liposomes should result in an increase in the fluorescence measured because the fluorophore should become further separated from the gold surface, reducing the efficiency of fluorescence quenching. No significant increase in the fluorescence of the adsorbed layer was observed during the potential pulses used in the poration procedure in the absence of liposomes. In the presence of liposomes, the fluorescence intensity was found to depend on the potential and time used for poration. At 0 V/SCE, no significant change in the fluorescence was observed for defect-free adsorbed layers. Changing the poration potential to -0.4 V/SCE caused significant increases in the fluorescence and the appearance of new structural features in the adsorbed layers that were more easily observed during the desorption procedure. The extent of fluorescence changes was found to be strongly dependent on the nature of the adsorbed layer under investigation, which suggests that the poration and liposome interaction are dependent on the quality of the adsorbed layer and its ease of poration through changes in the electrode potential.

Template directed synthesis of plasmonic gold nanotubes with tunable IR absorbance.

A nearly parallel array of pores can be produced by anodizing aluminum foils in acidic environments. Applications of anodic aluminum oxide (AAO) membranes have been under development since the 1990s and have become a common method to template the synthesis of high aspect ratio nanostructures, mostly by electrochemical growth or pore-wetting. Recently, these membranes have become commercially available in a wide range of pore sizes and densities, leading to an extensive library of functional nanostructures being synthesized from AAO membranes. These include composite nanorods, nanowires and nanotubes made of metals, inorganic materials or polymers. Nanoporous membranes have been used to synthesize nanoparticle and nanotube arrays that perform well as refractive index sensors, plasmonic biosensors, or surface enhanced Raman spectroscopy (SERS) substrates, as well as a wide range of other fields such as photo-thermal heating, permselective transport, catalysis, microfluidics, and electrochemical sensing. Here, we report a novel procedure to prepare gold nanotubes in AAO membranes. Hollow nanostructures have potential application in plasmonic and SERS sensing, and we anticipate these gold nanotubes will allow for high sensitivity and strong plasmon signals, arising from decreased material dampening.