Cristina Nerín

Critical review on recent developments in solventless techniques for extraction of analytes

The most recent contributions on solventless extraction techniques have been reviewed. This paper deals with those techniques that use solid phases, such as solid-phase microextraction, liquid phases, such as single-drop microextraction and hollow-fibre liquid-phase microextraction, and subcritical fluids, such as subcritical water extraction. In all cases, the most recent publications have been critically studied. Direct extraction and derivatization processes to facilitate the extraction of analytes in different areas have been included. Hyphenated approaches, if available, are also included in this review. Comparison of techniques organized by analytes and matrices also enhances this critical overview of solventless techniques.

Nanoparticle release from nano-silver antimicrobial food containers

Polymer nanocomposites incorporating metal or metal oxide nanoparticles have been developed to improve their characteristics (flexibility, gas barrier properties, antimicrobial or antioxidant properties, etc.). Among them silver nanoparticles are used because of their antimicrobial effect in many daily life materials, i.e. food packaging. However, there is not any reference to the migration of nanoparticles to the food. In this paper the results of migration studies (with different simulant solutions and times) in three commercial nanosilver plastic food containers are shown. Migration solutions were evaluated by ICP-MS and SEM-EDX analysis and silver in dissolved form and silver as nanoparticles were analyzed, a key aspect for the toxicity. Silver migration was observed for all samples studied, with the total silver migration values ranging between 1.66 and 31.46 ng/cm(2) (lower than the permissible limits). Size and morphology of the silver nanoparticles changed for the different samples (ranging between 10 and 60 nm) and migration of other nanosized materials was also confirmed.

Development of New Antioxidant Active Packaging Films Based on Ethylene Vinyl Alcohol Copolymer (EVOH) and Green Tea Extract

Ethylene vinyl alcohol copolymer (EVOH) films containing green tea extract were successfully produced by extrusion. The films were brown and translucent, and the addition of the extract increased the water and oxygen barrier at low relative humidity but increased the water sensitivity, the glass transition temperature, and the crystallinity of the films and improved their thermal resistance. An analysis by HPLC revealed that the antioxidant components of the extract suffered partial degradation during extrusion, reducing the content of catechin gallates and increasing the concentration of free gallic acid. Exposure of the films to various food simulants showed that the liquid simulants increased their capacity to reduce DPPH(•) and ABTS(•+) radicals. The release of green tea extract components into the simulant monitored by HPLC showed that all compounds present in the green tea extract were partially released, although the extent and kinetics of release were dependent on the type of food. In aqueous food simulants, gallic acid was the main antioxidant component released with partition coefficient values ca. 200. In 95% ethanol (fatty food simulant) the K value for gallic acid decreased to 8 and there was a substantial contribution of catechins (K in the 1000 range) to a greatly increased antioxidant efficiency. Kinetically, gallic acid was released more quickly than catechins, owing to its faster diffusivity in the polymer matrix as a consequence of its smaller molecular size, although the most relevant effect is the plasticization of the matrix by alcohol, increasing the diffusion coefficient >10-fold. Therefore, the materials here developed with the combination of antioxidant substances that constitute the green tea extract could be used in the design of antioxidant active packaging for all type of foods, from aqueous to fatty products, the compounds responsible for the protection being those with the higher compatibility with the packaged product.

New Cinnamon-Based Active Paper Packaging against Rhizopusstolonifer Food Spoilage

A new active paper package based on the incorporation of cinnamon essential oil to solid wax paraffin as an active coating is proposed, developed, and evaluated. The antifungal activity of the active paper is tested against Rhizopusstolonifer, and the results demonstrate that 6% (w/w) of the essential oil in the active coating formulation completely inhibits the growth of R. stolonifer, whereas 4% still has strong antimicrobial activity in in vitro conditions. Then, active paper is evaluated with actual food, sliced bread, using different storage times. After 3 days of storage, almost complete inhibition is obtained with 6% cinnamon essential oil. Qualitative analysis by solid-phase microextraction and determination of cinnamaldehyde in the sliced bread were also performed and confirmed the strong correspondence between the inhibition of the mold and the amount of cinnamaldehyde in the bread.

Effect of Mixed Antimicrobial Agents and Flavors in Active Packaging Films

Active packaging is an emerging food technology to improve the quality and safety of food products. Many works have been developed to study the antimicrobial activity of essential oils. Essential oils have been traditionally used as flavorings in food, so they have an important odor impact but they have as well antimicrobial properties that could be used to protect the food. Recent developments in antimicrobial active packaging showed the efficiency of essential oils versus bread and bakery products among other applications. However, one of the main problems to face is the odor and taste they could provide to the packaged food. Using some aromas to mask the odor could be a good approach. That is why the main objective of this paper is to develop an antimicrobial packaging material based on the combination of the most active compounds of essential oils (hydrocinnamaldehyde, oregano essential oil, cinnamaldehyde, thymol, and carvacrol) together with some aromas commonly used in the food industry. A study of the concentration required to get the antimicrobial properties, the organoleptic compatibility with typical aroma present in many food systems (vanilla, banana, and strawberry), and the right combination of both systems has been carried out. Antimicrobial tests of both the mentioned aromas, the main components of some essential oils, and the combination of both groups were carried out against bacteria (Enterococcus faecalis, Listeria monocytogenes, Bacillus cereus, Staphylococcus aureus, Salmonella choleraesuis, Yersinia enterocolitica, Escherichia coli), yeasts (Candida albicans, Debaryomyces hansenii, Zygosaccharomyces rouxii), and molds (Botrytis cinerae, Aspergillus flavus, Penicillium roqueforti, Eurotium repens, Penicillium islandicum, Penicillium commune, Penicillium nalgiovensis). The sensory properties of the combinations were evaluated with a triangular test and classification was by an order test; the odor threshold of the aroma compounds was also studied. The results reveal that none of the aromas had antimicrobial properties. The most antimicrobial compounds are thymol, carvacrol, and cinnamaldehyde, but none of them could be combined with banana aroma, whereas only thymol with strawberry aroma gave the right combined organoleptic profile. All of the antimicrobials under study could be combined with vanilla aroma, providing both antimicrobial property and the odor expected.

Determination of bisphenol-type contaminants from food packaging materials in aqueous foods by solid-phase microextraction-high-performance liquid chromatography.

A fast screening method consisting of off-line solid-phase microextraction coupled to HPLC and fluorescence detection, suitable for the analysis of several bisphenol derivatives and their degradation products in aqueous solution, has been developed. Detection limits of 0.7 ng ml(-1) for 2,2-bis[4-(glycidyloxy)phenyl]propane, 0.9 ng ml(-1) for bisphenol A bis(3-chloro-2-hydroxypropyl)ether, 1.1 ng ml(-1) for 2,2-bis(4-hydroxyphenyl)propane and 2.4 ng ml(-1) for bisphenol F diglycidyl ether have been achieved working in the linear range 10-500 ng ml(-1). The good analytical features achieved make the proposed method an interesting option for the direct determination of these compounds in aqueous canned food such as peas, tuna, olives, maize, artichokes or palm hearts. Both the optimization process and the results, including the analysis of real samples, are given and discussed.

The challenge of identifying non-intentionally added substances from food packaging materials: a review.

Packaged food can contain non-intentionally added substances (NIAS) as a result of reaction and degradation processes or the presence of impurities in the raw materials used for the packaging production. This manuscript reviews the evidence of NIAS and their possible origin. One of the most challenging and difficult tasks when a sample of packaging materials arrives at the laboratory is knowing the procedure to apply for identifying the unknown compounds. This work proposes an analytical procedure for sample treatment, applicable to polymers as well as to migration samples, and for NIAS identification. The identification protocol comprises the determination of both volatile and non-volatile compounds. A review is presented of the most novel analytical techniques used for identification purposes, particularly high resolution mass spectrometry (HRMS).

Quantitative determination of 22 primary aromatic amines by cation-exchange solid-phase extraction and liquid chromatography-mass spectrometry.

Primary aromatic amines (PAAs) have been broadly studied due to their high toxicity. In this work a method for the analysis of 22 PAAs in aqueous simulants has been developed. The method is based on a solid-phase extraction step using cation-exchange cartridges and the subsequent analysis of the extracts by ultra-high-performance liquid chromatography with mass spectrometric detection. The recoveries obtained for all the amines analyzed ranged between 81 and 109%, linear range was between 0.03 and 75 microg L(-1), with the RSD values between 4.5 and 13.4% and an average value of 7.5% and limits of detection at microg L(-1) level. The method has been applied to two real samples obtained from migration experiments of polyurethane based laminates to simulant B (water with 3% (w/v) acetic acid) which represents the worst case for the migration of aromatic amines. The main amines found in both samples were methylenedianiline isomers, obtained from the corresponding residual diisocyanates used during polyurethane adhesive polymerization. The total amine concentration found was 26 and 6.3 microg of aniline equivalents per kg of food simulant.

Use of solid-phase microextraction for the analysis of bisphenol A and bisphenol A diglycidyl ether in food simulants

A new method has been developed to simultaneously analyse bisphenol A (BPA) and bisphenol A diglycidyl ether (BADGE) in aqueous based food simulants. The method consists on direct immersion solid-phase microextraction (SPME) of the analytes from the liquid matrix and subsequent chromatographic analysis by gas chromatography-mass spectrometry. Using the proposed method, a whole analysis (including chromatographic step) can be completed in less than 40 min, with minimum sample handling. The SPME method shows good analytical performance for simultaneous BPA and BADGE analysis, except for BADGE determination in the aqueous alcohol (simulant C) solution. Detection limits ranging from 0.1 to 2.0 ng/g for BPA and from 13 to 15 ng/g from BADGE were obtained, with a linear range from the low-ng/g to several-microg/g range for BPA and from 0.1 microg/g to 40 microg/g for BADGE. A possible optimisation method has been also developed and introduced.

Determination of bile acids in human serum by on-line restricted access material–ultra high-performance liquid chromatography–mass spectrometry

This paper describes a new, fully automated on-line method combining restricted access material (RAM) extraction and ultra high-performance liquid chromatography (UHPLC) with mass spectrometric (MS) detection for determining congeners of bile acids (BAs) in human serum. In this method, low-pressure RAM and high-pressure UHPLC-MS are hyphenated by using a 2.5-mL loop-type interface. The compatibility problem between the large volume (1.2mL) of strong solvent (methanol) used for RAM elution and the need for a weak solvent in UHPLC injection has been addressed by using an auxiliary pre-column cross-flow of 0.1% aqueous formic acid. In this way, the complete 2.5mL loop volume can be injected into the UHPLC system, thereby maximizing sensitivity while maintaining good chromatographic performance. The optimised method allows the simultaneous analysis of 13 bile acids in a single run, including glycine- and taurine-conjugated bile acids, cholic acid (CA), deoxycholic acid (DCA), chenodeoxycholic acid (CDCA), ursodeoxycholic acid (UDCA), and litocholic acid. The complete analysis of a 100-microL single serum sample is performed in 30 min, providing detection limits in the pg range (corresponding with clinically relevant concentration levels) for all of the analytes except lithocholic acid, intra-day precision values (%R.S.D.) below 4% (except ursodeoxycholic acid) and inter-day precision lower than 15% (except ursodeoxycholic, glycoursodeoxycholic acid (GUDCA) and lithocholic acid).