D. Danesh

Two simple sequence repeat markers to select for soybean cyst nematode resistance coditioned by the rhg1 locus

Abstract The soybean cyst nematode (SCN) (Heterodera glycines Inchinoe) is the most economically significant soybean pest. The principal strategy to reduce or eliminate damage from this pest is the use of resistant cultivars. Identifying resistant segregants in a breeding program is a difficult and expensive process which is complicated by the oligogenic nature of the resistance and genetic variability in the pathogen. Fortunately, resistance at one SCN-resistance locus, rhg1, is generally accepted as a necessity for the development of resistant genotypes using any source of resistance and when challenged by any SCN race. Thus, the development of SCN resistant cultivars would be expedited if an effective and rapid system were available to identify breeding lines carrying a resistance allele at the rhg1 locus. In this study we report two simple sequence repeat (SSR) or microsatellite loci that cosegregate and map 0.4 cM from rhg1. Allelic variation at the first of these loci, BARC-Satt309, distinguished most, if not all, SCN-susceptible genotypes from those carrying resistance at rhg1 derived from the important SCN-resistance sources ’Peking’, PI 437654, and PI 90763. BARC-Satt309 was also effective in distinguishing SCN resistance sources PI 88788 and PI 209332 from many, but not all, susceptible genotypes. BARC-Satt309 cannot be used in marker-assisted selection in populations developed from typical southern US cultivars crossed with the important resistance sources PI 88788 or PI 209332 because these genotypes all carry the identical allele at the BARC-Satt309 locus. A second SSR locus, BARC-Sat_168, was developed from a bacterial artificial chromosome (BAC) clone that was identified using the primers to BARC-Satt309. BARC-Sat_168 distinguished PI 88788 and PI 209332 from southern US cultivars such as ’Lee’, ’Bragg’ and ’Essex’. Both BARC-Satt309 and BARC-Sat_168 were used to assay lines from SCN-susceptible×SCN-resistant crosses and proved to be highly effective in identifying lines carrying rhg1 resistance from those carrying the allele for SCN susceptibility at the rhg1 locus.

Comparative genome analysis of mungbean (Vigna radiata L. Wilczek) and cowpea (V. unguiculata L. Walpers) using RFLP mapping data

Genome relationships between mungbean (Vigna tradiata) and cowpea (V. Unguiculata) based on the linkage arrangement of random genomic restriction fragment length polymorphism (RFLP) markers have been investigated. A common set of probes derived from cowpea, common bean (Phaseolus vulgaris), mungbean, and soybean (Glycine max) PstI genomic libraries were used to construct the genetic linkage maps. In both species, a single F2 population from a cross between an improved cultivar and a putative wild progenitor species was used to follow the segregation of the RFLP markers. Approximately 90% of the probes hybridized to both mungbean and cowpea DNA, indicating a high degree of similarity in the nucleotide sequences among these species. A higher level of polymorphism was detected in the mungbean population (75.7%) than in the cowpea population (41.2%). Loci exhibiting duplications, null phenotypes, and distorted segregation ratios were detected in both populations. Random genomic DNA RFLP loci account for about 89% of the currently mapped markers with a few cDNA and RAPD markers added. The current mungbean map is comprised of 171 loci/loci clusters distributed in 14 linkage groups spanning a total of 1570cM. On the other hand, 97 markers covered 684 cM and defined 10 linkage groups in the current cowpea map. The mungbean and cowpea genomes were compared on the basis of the copy number and linkage arrangement of 53 markers mapped in common between the two species. Results indicate that nucleotide sequences are conserved, but variation in copy number were detected and several rearrangements in linkage orders appeared to have occurred since the divergence of the two species. Entire linkage groups were not conserved, but several large linkage blocks were maintained in both genomes.

Targeted isolation of simple sequence repeat markers through the use of bacterial artificial chromosomes

Abstract Simple sequence repeats (SSRs) are versatile DNA markers that are readily assayed and highly informative. Unfortunately, non-targeted approaches to SSR development often leave large genomic regions without SSR markers. In some cases these same genomic regions are already populated by other types of DNA markers, especially restriction fragment length polymorphisms (RFLPs), random amplified polymorphic DNAs (RAPDs), and amplified fragment length polymorphisms (AFLPs). To identify SSR markers in such regions, bacterial artificial chromosome (BAC) clones can be used as intermediaries. First, one or more BAC clones in a region of interest are identified through the use of an existing DNA marker. BAC clones uncovered in this initial step are then used to create a small insert DNA library that can be screened for the presence of SSR-containing clones. Because BAC inserts are often 100-kb pairs or more in size, most contain one or more SSRs. This strategy was applied to two regions of the soybean genome near genes that condition resistance to the soybean cyst nematode on molecular linkage groups G and A2. This targeted approach to identifying new DNA markers can readily be extended to other types of DNA markers, including single nucleotide polymorphisms.

Genetic dissection of oligogenic resistance to bacterial wilt in tomato

To study resistance to bacterial wilt (caused by Pseudomonas solanacearum) in tomato, we analyzed 71 F2 individuals from a cross between a resistant and a susceptible parent with 79 DNA markers. F2 plants were inoculated by two methods: bacteria were injected into shoots of cuttings or poured into soil surrounding wounded roots. Disease responses were scored on a scale of 0 to 5. Statistical comparisons between DNA marker genotypes and disease phenotypes identified three genomic regions correlated with resistance. In plants inoculated through roots, genomic regions on chromosomes 6 and 10 were correlated with resistance. In plants inoculated through shoots, a region on chromosome 7 was significant, as were the regions on chromosomes 6 and 10. The relative impact of resistance loci on disease response differed between shoot and root inoculations. To confirm the existence of a partial resistance gene on chromosome 6, an F2 individual homozygous for the resistant parents alleles on chromosomes 7 and 10, but heterozygous for markers on chromosome 6, was selfed. Analysis of the F3 progeny confirmed that a partial resistance locus was located on chromosome 6, very close to CT184. The presence of a partial resistance locus on chromosome 10 was similarly confirmed by analysis of progeny of another F2 plant chosen on the basis of its marker phenotype.

A bacterial artificial chromosome library for soybean and identification of clones near a major cyst nematode resistance gene

Abstract We constructed a bacterial artificial chromosome (BAC) library for soybean (Glycine max) consisting of approximately 30 000 clones with an average insert size of 120 kilobase pairs. The library was successfully screened with restriction fragment length polymorphism (RFLP) and microsatellite markers tightly linked to a major resistance gene for the cyst nematode, Heterodera glycines. Since many soybean RFLPs hybridize to duplicate loci, BACs homologous to duplicate RFLP loci were distinguished by digestion with the restriction enzyme originally used to map the RFLP, followed by a comparison of the hybridizing fragments. Linkage mapping of BAC clones identified with markers linked to the cyst nematode resistance gene demonstrated that these clones were located at the expected chromosomal positions and that there were no indications of chimeras within the genomic inserts.

Molecular taxonomic relationships in the genus Vigna based on RFLP analysis

SummaryThe taxonomy of the genus Vigna has been primarily based on morphological attributes. We have used 27 genomic clones from soybean, common bean, mungbean and cowpea to examine restriction fragment length polymorphism (RFLP) among 44 accessions of different species belonging to four subgenera of the genus Vigna. One accession each of common bean (Phaseolus vulgaris) and soybean (Glycine max) was included in the study. Total DNA from the various genotypes was digested with one restriction enzyme (Eco RV). Results of a numerical taxonomic analysis showed a high level of genetic variation within the genus with a remarkably higher amount of variation associated with Vigna sp. from Africa relative to those from Asia. The distinctness of the Asiatic grams in subgenus Ceratotropis, cowpea in section Catiang, bambara groundnut (V. subterranean) and members of the subgenus Plectotropis was elucidated by this study. Members of the subgenus Plectotropis were closer in genome homology to those of subgenus Vigna section Catiang than to those of subgenus Ceratotropis. The relative positions of some genotypes to one another on the dendrogram and minimum spanning tree were discussed in regard to hybridisations aimed generating well-saturated genomic maps and interspecies transfer of desirable genes.

Genetic and physical localization of the soybean Rpg1-b disease resistance gene reveals a complex locus containing several tightly linked families of NBS-LRR genes

Alleles or tightly linked genes at the soybean (Glycine max L. Merr.) Rpg1 locus confer resistance to strains of Pseudomonas syringae pv. glycinea that express the avirulence genes avrB or avrRpm1. We have previously mapped Rpg1-b (the gene specific for avrB) to a cluster of resistance genes (R genes) with diverse specificities in molecular linkage group F. Here, we describe the high-resolution physical and genetic mapping of Rpg1-b to a 0.16-cM interval encompassed by two overlapping BAC clones spanning approximately 270 kilobases. Rpg1-b is part of a complex locus containing numerous genes related to previously characterized coiled coil-nucleotide binding site-leucine rich repeat (CC-NBS-LRR)-type R genes that are spread throughout this region. Phylogenetic and Southern blot analyses group these genes into four distinct subgroups, some of which are conserved in the common bean, Phaseolus vulgaris, indicating that this R gene cluster may predate the divergence of Phaseolus and Glycine. Members from different subgroups are physically intermixed and display a high level of polymorphism between soybean cultivars, suggesting that this region is rearranging at a high frequency. At least five CC-NBS-LRR-type genes cosegregate with Rpg1-b in our large mapping populations.

Mapping oligogenic resistance to powdery mildew in mungbean with RFLPs

We have used restriction fragment length polymorphisms (RFLPs) to map genes in mungbean (Vigna radiata) that confer partial resistance to the powdery mildew fungus, Erysiphe polygoni. DNA genotypes for 145 RFLP loci spanning 1570 centimorgans of the mungbean genome were assayed in a population of 58 F2 plants. This population was derived from a cross between a moderately powdery mildew resistant (“VC3980A”) and a susceptible (“TC1966”) mungbean parent. F3 lines derived from the F2 plants were assayed in the field for powdery mildew response and the results were compared to the RFLP genotype data, thereby identifying loci associated with powdery mildew response. A total of three genomic regions were found to have an effect on powdery mildew response, together explaining 58% of the total variation. At 65 days after planting, two genomic regions were significantly associated with powdery mildew resistance. For both loci, the allele from “VC3890A” was associated with increased resistance. At 85 days, a third genomic region was also associated with powdery mildew response. For this locus, the allele from the susceptible parent (“TC1966”) was the one associated with higher levels of powdery mildew resistance. These results indicate that putative partial resistance loci for powdery mildew in mungbean can be identified with DNA markers, even in a population of modest size analyzed at a single location in a single year.

RFLP mapping of a major bruchid resistance gene in mungbean (Vigna radiata, L. Wilczek)

SummaryBruchids (genus Callosobruchus) are among the most destructive insect pests of mungbeans and other members of the genus, Vigna. Genetic resistance to bruchids was previously identified in a wild mungbean relative, TC1966. To analyze the underlying genetics, accelerate breeding, and provide a basis for map-based cloning of this gene, we have mapped the TC1966 bruchid resistance gene using restriction fragment length polymorphism (RFLP) markers. Fifty-eight F2 progeny from a cross between TC1966 and a susceptible mungbean cultivar were analyzed with 153 RFLP markers. Resistance mapped to a single locus on linkage group VIII, approximately 3.6 centimorgans from the nearest RFLP marker. Because the genome of mungbean is relatively small (estimated to be between 470 and 560 million base pairs), this RFLP marker may be suitable as a starting point for chromosome walking. Based on RFLP analysis, an individual was also identified in the F2 population that retained the bruchid resistance gene within a tightly linked double crossover. This individual will be valuable in developing resistant mungbean lines free of linkage drag.

Targeted isolation, sequence analysis, and physical mapping of nonTIR NBS-LRR genes in soybean

Abstract Most cloned plant disease resistance genes (R-genes) code for proteins belonging to the nucleotide binding site (NBS) leucine-rich repeat (LRR) superfamily. NBS-LRRs can be divided into two classes based on the presence of a TIR domain (Toll and interleukin receptor-like sequence) or a coiled coil motif (nonTIR) in their N-terminus. We used conserved motifs specific to nonTIR-NBS-LRR sequences in a targeted PCR approach to generate nearly 50 genomic soybean sequences with strong homology to known resistance gene analogs (RGAs) of the nonTIR class. Phylogenetic analysis classified these sequences into four main subclasses. A representative clone from each subclass was used for genetic mapping, bacterial artificial chromosome (BAC) library screening, and construction of RGA-containing BAC contigs. Of the 14 RGAs that could be mapped genetically, 12 localized to a 25-cM region of soybean linkage group F already known to contain several classical disease resistance loci. A majority of the genomic region encompassing the RGAs was physically isolated in eight BAC contigs, together spanning more than 1 Mb of genomic sequence with at least 12 RGA copies. Phylogenetic and sequence analysis, together with genetic and physical mapping, provided insights into the genome organization and evolution of this large cluster of soybean RGAs.