Dan DelVescovo

Reaction Mechanisms and HCCI Combustion Processes of Mixtures of n-Heptane and the Butanols

A reduced primary reference fuel (PRF)-Alcohol-Di-tert-butyl Peroxide (DTBP) mechanism with 108 species and 435 reactions, including sub-mechanisms of PRF, methanol, ethanol, DTBP and the four butanol isomers, is proposed for homogeneous charge compression ignition (HCCI) engine combustion simulations of butanol isomers/n-heptane mixtures. HCCI experiments fuelled with butanol isomer/n-heptane mixtures on two different engines are conducted for the validation of proposed mechanism. The mechanism has been validated against shock tube ignition delays, laminar flame speeds, species profiles in premixed flames and engine HCCI combustion data, and good agreements with experimental results are demonstrated under various validation conditions. It is found that although the reactivity of neat tert-butanol is the lowest, mixtures of tert-butanol/n-heptane exhibit the highest reactivity among the butanol isomer/n-heptane mixtures if the n-heptane blending ratio exceeds 20% (mole). Kinetic analysis shows that the highest C-H bond energy in the tert-butanol molecule is partially responsible for this phenomenon. It is also found that the reaction tC4H9OH+CH3O2 =tC4H9O+CH3O2H plays important role and eventually produces the OH radical to promote the ignition and combustion. The proposed mechanism is able to capture HCCI combustion processes of the butanol/n-heptane mixtures under different operating conditions. In addition, the trend that tert-butanol /n-heptane has the highest reactivity is also captured in HCCI combustion simulations. The results indicate that the current mechanism can be used for HCCI engine predictions of PRF and alcohol fuels.

Natural Gas for High Load Dual-Fuel Reactivity Controlled Compression Ignition (RCCI) in Heavy-Duty Engines

Reactivity controlled compression ignition (RCCI) has been shown to be capable of providing improved engine efficiencies coupled with the benefit of low emissions via in-cylinder fuel blending. Much of the previous body of work has studied the use of gasoline as the premixed low-reactivity fuel. However, there is interest in exploring the use of alternative fuels in advanced combustion strategies. Due to the strong market growth of natural gas as a fuel in both mobile and stationary applications, a study on the use of methane for RCCI combustion was performed. Single cylinder heavy-duty engine experiments were undertaken to examine the operating range of the RCCI combustion strategy with methane/diesel fueling, and was compared against gasoline/diesel RCCI operation. The experimental results show a significant load extension of RCCI engine operation with methane/diesel fueling compared to gasoline/diesel fueling. For gasoline/diesel fueling, a maximum load of 6.9 bar IMEPg at CA50 = 0° aTDC and 7.0 bar IMEPg at CA50 = 4° aTDC was obtained without use of EGR. For methane/diesel fueling a maximum load of 15.4 bar IMEPg at CA50 = 0° aTDC and 17.3 bar IMEPg at CA50 = 4° aTDC was achieved, showing the effectiveness of the use of methane in extending the load limit for RCCI engine operation.Copyright