Daniel A. Balikov

Three-dimensional graphene foams promote osteogenic differentiation of human mesenchymal stem cells

Graphene is a novel material whose application in biomedical sciences has only begun to be realized. In the present study, we have employed three-dimensional graphene foams as culture substrates for human mesenchymal stem cells and provide evidence that these materials can maintain stem cell viability and promote osteogenic differentiation.

Development of 3D Microvascular Networks Within Gelatin Hydrogels Using Thermoresponsive Sacrificial Microfibers.

A 3D microvascularized gelatin hydrogel is produced using thermoresponsive sacrificial poly(N-isopropylacrylamide) microfibers. The capillary-like microvascular network allows constant perfusion of media throughout the thick hydrogel, and significantly improves the viability of human neonatal dermal fibroblasts encapsulated within the gel at a high density.

Pendant allyl crosslinking as a tunable shape memory actuator for vascular applications

UNLABELLED Thermo-responsive shape memory polymers (SMPs) can be programmed to fit into small-bore incisions and recover their functional shape upon deployment in the body. This property is of significant interest for developing the next generation of minimally-invasive medical devices. To be used in such applications, SMPs should exhibit adequate mechanical strengths that minimize adverse compliance mismatch-induced host responses (e.g. thrombosis, hyperplasia), be biodegradable, and demonstrate switch-like shape recovery near body temperature with favorable biocompatibility. Combinatorial approaches are essential in optimizing SMP material properties for a particular application. In this study, a new class of thermo-responsive SMPs with pendant, photocrosslinkable allyl groups, x%poly(ε-caprolactone)-co-y%(α-allyl carboxylate ε-caprolactone) (x%PCL-y%ACPCL), are created in a robust, facile manner with readily tunable material properties. Thermomechanical and shape memory properties can be drastically altered through subtle changes in allyl composition. Molecular weight and gel content can also be altered in this combinatorial format to fine-tune material properties. Materials exhibit highly elastic, switch-like shape recovery near 37°C. Endothelial compatibility is comparable to tissue culture polystyrene (TCPS) and 100%PCL in vitro and vascular compatibility is demonstrated in vivo in a murine model of hindlimb ischemia, indicating promising suitability for vascular applications. STATEMENT OF SIGNIFICANCE With the ongoing thrust to make surgeries minimally-invasive, it is prudent to develop new biomaterials that are highly compatible and effective in this workflow. Thermo-responsive shape memory polymers (SMPs) have great potential for minimally-invasive applications because SMP medical devices (e.g. stents, grafts) can fit into small-bore minimally-invasive surgical devices and recover their functional shape when deployed in the body. To realize their potential, it is imperative to devise combinatorial approaches that enable optimization of mechanical, SM, and cellular responses for a particular application. In this study, a new class of thermo-responsive SMPs is created in a robust, facile manner with readily tunable material properties. Materials exhibit excellent, switch-like shape recovery near body temperature and promising biocompatibility for minimally-invasive vascular applications.

Poly(l-Lactic Acid)/Gelatin Fibrous Scaffold Loaded with Simvastatin/Beta-Cyclodextrin-Modified Hydroxyapatite Inclusion Complex for Bone Tissue Regeneration

Recently, the application of nanostructured materials in the field of tissue engineering has garnered attention to mediate treatment and regeneration of bone defects. In this study, poly(l-lactic acid) (PLLA)/gelatin (PG) fibrous scaffolds are fabricated and β-cyclodextrin (βCD) grafted nano-hydroxyapatite (HAp) is coated onto the fibrous scaffold surface via an interaction between βCD and adamantane. Simvastatin (SIM), which is known to promote osteoblast viability and differentiation, is loaded into the remaining βCD. The specimen morphologies are characterized by scanning electron microscopy. The release profile of SIM from the drug loaded scaffold is also evaluated. In vitro proliferation and osteogenic differentiation of human adipose derived stem cells on SIM/HAp coated PG composite scaffolds is characterized by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red S staining), and real time Polymerase chain reaction (PCR). The scaffolds are then implanted into rabbit calvarial defects and analyzed by microcomputed tomography for bone formation after four and eight weeks. These results demonstrate that SIM loaded PLLA/gelatin/HAp-(βCD) scaffolds promote significantly higher ALP activity, mineralization, osteogenic gene expression, and bone regeneration than control scaffolds. This suggests the potential application of this material toward bone tissue engineering.

Patterned polymer matrix promotes stemness and cell-cell interaction of adult stem cells

BackgroundThe interaction of stem cells with their culture substrates is critical in controlling their fate and function. Declining stemness of adult-derived human mesenchymal stem cells (hMSCs) during in vitro expansion on tissue culture polystyrene (TCPS) severely limits their therapeutic efficacy prior to cell transplantation into damaged tissues. Thus, various formats of natural and synthetic materials have been manipulated in attempts to reproduce in vivo matrix environments in which hMSCs reside.ResultsWe developed a series of patterned polymer matrices for cell culture by hot-pressing poly(ε-caprolactone) (PCL) films in femtosecond laser-ablated nanopore molds, forming nanofibers on flat PCL substrates. hMSCs cultured on these PCL fiber matrices significantly increased expression of critical self-renewal factors, Nanog and OCT4A, as well as markers of cell-cell interaction PECAM and ITGA2. The results suggest the patterned polymer fiber matrix is a promising model to maintain the stemness of adult hMSCs.ConclusionThis approach meets the need for scalable, highly repeatable, and tuneable models that mimic extracellular matrix features that signal for maintenance of hMSC stemness.

A temperature-sensitive, self-adhesive hydrogel to deliver iPSC-derived cardiomyocytes for heart repair

Induced pluripotent stem cells (iPSCs) from patients’ somatic tissues provide a viable source to create autologous cardiomyocytes (CMs) for potential cardiac-related cell therapies. However, a gap between the generation of iPSC-derived cardiomyocytes (iPSC-CMs) and the successful intra-cardiac engraftment of the cells to restore heart function remains to be bridged. Clinical data reporting engraftment of cells within human heart tissue has not been without its challenges, with significant cell loss from the site of delivery due to the physical stress of the cardiac cycle and the hostile inflammatory response within the infarct zone.[1–3] Hydrogels have been proven to support the survival of multiple cell types and have served as a platform for cell transplantation.[4, 5] Yet the use of tissue-adhesive, temperature-sensitive hydrogels to deliver iPSC-derived cardiomyocytes to infarcted heart remains to be explored. Therefore, we developed a polymer hydrogel to encapsulate, deliver, and integrate iPSC-CMs into infarcted myocardium to restore heart function. A temperature-sensitive biodegradable copolymer (polyethylene glycol-co-poly-e-caprolactone (PEG-PCL)) was synthesized [6] and conjugated with a collagen-binding peptide (SYIRIADTNIT). [7] The polymer was soluble in aqueous solutions at room temperature and underwent solution-to-gel transition at 37°C (Fig. 1 a,b).[6] As the peptide-modified polymer had a strong affinity to collagen I in vitro (Fig. 1c), it was expected that it would significantly increase the binding of the hydrogel to an infarcted heart, thus immobilizing iPSC-CMs within the damaged myocardium. Functional, beating cardiomyocytes were derived from patient fibroblast-derived iPSCs using a “Matrigel sandwich” method.[8] Cardiac differentiation was confirmed by fluorescence-activated cell sorting (FACS) and by immunostaining with known cardiac markers cardiac troponin T (cTNT), ryanodine receptor 2 (RYR) and α-actinin (Fig. 1f). The iPSC-CMs encapsulated in the polymer hydrogel at 37°C for two weeks maintained their viability (Fig. 1g) and cardiac phenotype, as evidenced by strong expression of troponin T and Nkx2.5 (Fig. 1h); thus, PEG-PCL does not appear to have obvious toxic effects on iPSC-CMs. Fig. 1 PEG-PCL copolymer was (a) dissolved in PBS at RT and (b) gelled at 37°C within 5 min (Sol-gel transition). Collagen-binding study was performed by adding peptide-modified polymer to collagen-coated surface at 37°C, and unbound polymer ... Engraftment of iPSC-CMs into infarcted myocardium using the peptide-modified hydrogel and its impact on infarcted heart function and structure were assessed with a rat myocardial infarction (MI) model. All animal surgery and animal care were approved by the Institutional Animal Care and Use Committee (IACUC) at Vanderbilt University (protocol: M/12/074). The left anterior descending (LAD) coronary artery of nude rats was ligated to induce MI. At 30 minutes post-MI, iPSC-CMs alone, or modified copolymer solution with or without iPSC-CMs (2–4 million/rat) were injected around the infarct border zone. A negative control group received the LAD ligation and phosphate-buffered saline (PBS) injection without cells or copolymer. At two weeks post-injection, heart dimensions and functional output were assessed by echocardiography. All groups had ventricular dilation and reduced fractional shortening (FS) (Fig. 2). However, rats treated with iPSC-CM-encapsulated copolymer demonstrated significantly less decline in FS (Δ= −6.37±0.49%) compared to other groups (Δ= −12.77±2.04%, −11.44±2.04% and −12.65±1.53% for PBS control, iPSC-CM only, and polymer only groups, respectively (Fig. 2a). p=0.016 vs. PBS, p=0.021 vs. iPSC-CM only, and p=0.005 vs. polymer only). Overall, the iPSC-CM plus polymer group demonstrated 50.1%, 28.2% and 49.6% improvement in LV systolic function over PBS, iPSC-CM only and polymer only groups (Fig. 2b). Moreover, rats treated with iPSC-CM plus polymer demonstrated a trend toward less LV enlargement (Δ= 15.07±3.24%) compared to other groups (Δ=24.44±3.99%, 25.02±2.03% and 23.17±4.51% for PBS control, iPSC-CM only, and polymer only groups, respectively; Fig. 2c) although this reached statistical significance only in comparison to the iPSC-CM group (p=0.032). Overall, iPSC-CM plus polymer group demonstrated 38.3%, 39.8% and 35.0% less LV enlargement over PBS, iPSC-CM only and polymer only groups, suggesting that iPSC-CM encapsulated in polymer curtailed adverse ventricular remodeling better than other treatment modalities. Fig. 2 The effects of hydrogel-encapsulated iPSC-CMs on left ventricle function and remodeling. (a–c) Echocardiography was performed before the ligation of rat LAD coronary arteries (baseline) and again 2 weeks post-delivery (n=5 rats per group). (a, ... Histological examination of the hearts was performed, and the LV anterior free wall thickness was measured using ImageJ and averaged from 3 randomly selected regions in each rat heart. Result demonstrated that, in addition to LV chamber enlargement, the LAD ligation resulted in dramatic thinning and significant fibrosis of the LV anterior free wall at two weeks in control groups (Fig. 2e). In contrast, heart injected with polymer-encapsulated iPSC-CMs had smaller LV chamber, thicker LV free wall and less fibrosis (Fig. 2e). Overall, hearts in the iPSC-CM plus polymer group were significantly thicker than all other groups; the average LV anterior wall thickness of cell plus polymer group was 2.46±0.06mm, compared with 0.48±0.07, 0.35±0.05 and 0.39±0.02mm in PBS, cell only and polymer only groups, respectively (Fig. 2d, p<0.001). In summary, implantation of iPSC-CMs encapsulated in polymer hydrogel was much more effective at limiting adverse LV remodeling and preserving cardiac function after MI than other treatment modalities. Importantly, as implantation of iPSC-CMs or polymer alone did not elicit as favorable outcomes as the iPSC-CMs plus polymer group, we attribute the latter group’s synergistic effects to enhanced survival of transplanted iPSC-CMs in vivo. Consistent with this notion, staining for human nuclei confirmed the presence of iPSC-CMs, delivered with the polymer hydrogel, in the peri-infarct region of the host rat myocardium at 2 weeks (Fig. 2f); moreover, the implanted cells maintained their cardiac phenotype, as demonstrated by positive staining of cardiac α-actinin (Fig. 2f). By contrast, no human nuclei were detected in hearts of control groups at 2 weeks. In conclusion, we describe a temperature-sensitive, collagen-binding hydrogel based system to deliver human iPSC-derived cardiomyocytes to improve cardiac structure and function in infarcted rat heart. Moreover, our studies indicate that the beneficial effects of encapsulating iPSC-CMs in hydrogel are mediated through enhanced survival of transplanted iPSC-CMs in vivo. While future studies are needed to demonstrate long-term functional engraftment of transplanted cells, our study illustrates a promising biomaterial-based approach to overcome a commonly recognized obstacle to the potentially revolutionary cell-based approaches to repair failing hearts: survival of donor cells in the infarcted heart.

Current progress in nanotechnology applications for diagnosis and treatment of kidney diseases.

Significant progress has been made in nanomedicine, primarily in the form of nanoparticles, for theranostic applications to various diseases. A variety of materials, both organic and inorganic, have been used to develop nanoparticles with promise to achieve improved efficacy in medical applications as well as reduced systemic side effects compared to current standard of care medical practices. In particular, this article highlights the recent development and application of nanoparticles for diagnosing and treating nephropathologies.

Cationic Nanocylinders Promote Angiogenic Activities of Endothelial Cells

Polymers have been used extensively taking forms as scaffolds, patterned surface and nanoparticle for regenerative medicine applications. Angiogenesis is an essential process for successful tissue regeneration, and endothelial cell–cell interaction plays a pivotal role in regulating their tight junction formation, a hallmark of angiogenesis. Though continuous progress has been made, strategies to promote angiogenesis still rely on small molecule delivery or nuanced scaffold fabrication. As such, the recent paradigm shift from top-down to bottom-up approaches in tissue engineering necessitates development of polymer-based modular engineering tools to control angiogenesis. Here, we developed cationic nanocylinders (NCs) as inducers of cell–cell interaction and investigated their effect on angiogenic activities of human umbilical vein endothelial cells (HUVECs) in vitro. Electrospun poly (l-lactic acid) (PLLA) fibers were aminolyzed to generate positively charged NCs. The aninolyzation time was changed to produce two different aspect ratios of NCs. When HUVECs were treated with NCs, the electrostatic interaction of cationic NCs with negatively charged plasma membranes promoted migration, permeability and tubulogenesis of HUVECs compared to no treatment. This effect was more profound when the higher aspect ratio NC was used. The results indicate these NCs can be used as a new tool for the bottom-up approach to promote angiogenesis.

Tunable Surface Repellency Maintains Stemness and Redox Capacity of Human Mesenchymal Stem Cells

Human bone marrow derived mesenchymal stem cells (hMSCs) hold great promise for regenerative medicine due to their multipotent differentiation capacity and immunomodulatory capabilities. Substantial research has elucidated mechanisms by which extracellular cues regulate hMSC fate decisions, but considerably less work has addressed how material properties can be leveraged to maintain undifferentiated stem cells. Here, we show that synthetic culture substrates designed to exhibit moderate cell-repellency promote high stemness and low oxidative stress-two indicators of naïve, healthy stem cells-in commercial and patient-derived hMSCs. Furthermore, the material-mediated effect on cell behavior can be tuned by altering the molar percentage (mol %) and/or chain length of poly(ethylene glycol) (PEG), the repellant block linked to hydrophobic poly(ε-caprolactone) (PCL) in the copolymer backbone. Nano- and angstrom-scale characterization of the cell-material interface reveals that PEG interrupts the adhesive PCL domains in a chain-length-dependent manner; this prevents hMSCs from forming mature focal adhesions and subsequently promotes cell-cell adhesions that require connexin-43. This study is the first to demonstrate that intrinsic properties of synthetic materials can be tuned to regulate the stemness and redox capacity of hMSCs and provides new insight for designing highly scalable, programmable culture platforms for clinical translation.

Copolymer-Mediated Cell Aggregation Promotes a Proangiogenic Stem Cell Phenotype In Vitro and In Vivo

Material-induced cell aggregation drives a proangiogenic expression profile. Copolymer substrates containing cell-repellent and cell-adhesive domains force the aggregation of human mesenchymal stem cells, which results in enhanced tubulogenesis in vitro and stabilization of vasculature in vivo. These findings can be used to design instructive biomaterial scaffolds for clinical use.