Daniel Bahena

Structure of the thiolated Au130 cluster.

The structure of the recently discovered Au130-thiolate and -dithiolate clusters is explored in a combined experiment-theory approach. Rapid electron diffraction in scanning/transmission electron microscopy (STEM) enables atomic-resolution imaging of the gold core and the comparison with density functional theory (DFT)-optimized realistic structure models. The results are consistent with a 105-atom truncated-decahedral core protected by 25 short staple motifs, incorporating disulfide bridges linking the dithiolate ligands. The optimized structure also accounts, via time-dependent DFT (TD-DFT) simulation, for the distinctive optical absorption spectrum, and rationalizes the special stability underlying the selective formation of the Au130 cluster in high yield. The structure is distinct from, yet shares some features with, each of the known Au102 and Au144/Au146 systems.

Advanced microscopy of star-shaped gold nanoparticles and their adsorption-uptake by macrophages

Metallic nanoparticles have diverse applications in biomedicine, as diagnostics, image contrast agents, nanosensors and drug delivery systems. Anisotropic metallic nanoparticles possess potential applications in cell imaging and therapy + diagnostics (theranostics), but controlled synthesis and growth of these anisotropic or branched nanostructures has been challenging and usually require use of high concentrations of surfactants. Star-shaped gold nanoparticles were synthesized in high yield through a seed mediated route using HEPES as a precise shape-directing capping agent. Characterization was performed using advanced electron microscopy techniques including atomic resolution TEM, obtaining a detailed characterization of nanostructure and atomic arrangement. Spectroscopy techniques showed that the particles have narrow size distribution, monodispersity and high colloidal stability, with absorbance into NIR region and high efficiency for SERS applications. Gold nanostars showed to be biocompatible and efficiently adsorbed and internalized by macrophages, as revealed by advanced FE-SEM and backscattered electron imaging techniques of complete unstained uncoated cells. Additionally, low voltage STEM and X-ray microanalysis revealed the ultra-structural location and confirmed stability of nanoparticles after endocytosis with high spatial resolution.

Trimetallic nanostructures: the case of AgPd–Pt multiply twinned nanoparticles

We report the synthesis, structural characterization, and atomistic simulations of AgPd-Pt trimetallic (TM) nanoparticles. Two types of structure were synthesized using a relatively facile chemical method: multiply twinned core-shell, and hollow particles. The nanoparticles were small in size, with an average diameter of 11 nm and a narrow distribution, and their characterization by aberration corrected scanning transmission electron microscopy allowed us to probe the structure of the particles at an atomistic level. In some nanoparticles, the formation of a hollow structure was also observed, that facilitates the alloying of Ag and Pt in the shell region and the segregation of Ag atoms on the surface, affecting the catalytic activity and stability. We also investigated the growth mechanism of the nanoparticles using grand canonical Monte Carlo simulations, and we have found that Pt regions grow at overpotentials on the AgPd nanoalloys, forming 3D islands at the early stages of the deposition process. We found very good agreement between the simulated structures and those observed experimentally.

Highly monodisperse multiple twinned AuCu–Pt trimetallic nanoparticles with high index surfaces

Trimetallic nanoparticles possess different properties than their mono- and bi-metallic counterparts, opening a wide range of possibilities for diverse potential applications with the notion to study possible morphology, atomic ordering, reduce precious metal consumption and many others. In this paper, we present a comprehensive experimental study on AuCu-Pt trimetallic nanoparticles with an average diameter of 15 ± 1.0 nm, synthesized in a one-pot synthesis method and characterized by the Cs-corrected scanning transmission electron microscopy technique that allowed us to probe the structure at the atomic level resolution. A new way to control the nanoparticle morphology by the presence of third metal (Pt) is also discussed by the overgrowth of Pt on the as prepared AuCu core by Frank-van der Merwe (FM) layer-by-layer and Stranski-Krastanov (SK) island-on-wetting-layer growth modes. With the application of this research, we are now a step closer to produce optimum catalysts in which the active phase forms only surface monolayers. In addition, the nanoalloy exhibits high index facet surfaces with {211} and {321} families that are highly open-structure surfaces and are interesting for the catalytic applications.

Synthesis, characterization, and growth simulations of Cu–Pt bimetallic nanoclusters

Summary Highly monodispersed Cu–Pt bimetallic nanoclusters were synthesized by a facile synthesis approach. Analysis of transmission electron microscopy (TEM) and spherical aberration (C s)-corrected scanning transmission electron microscopy (STEM) images shows that the average diameter of the Cu–Pt nanoclusters is 3.0 ± 1.0 nm. The high angle annular dark field (HAADF-STEM) images, intensity profiles, and energy dispersive X-ray spectroscopy (EDX) line scans, allowed us to study the distribution of Cu and Pt with atomistic resolution, finding that Pt is embedded randomly in the Cu lattice. A novel simulation method is applied to study the growth mechanism, which shows the formation of alloy structures in good agreement with the experimental evidence. The findings give insight into the formation mechanism of the nanosized Cu–Pt bimetallic catalysts.

Structural order in ultrathin films of the monolayer protected clusters based upon 4 nm gold nanocrystals: an experimental and theoretical study

The structural order in ultrathin films of monolayer protected clusters (MPCs) is important in a number of application areas but can be difficult to demonstrate by conventional methods, particularly when the metallic core dimension, d, is in the intermediate size-range, 1.5 < d < 5.0 nm. Here, improved techniques for the synthesis of monodisperse thiolate-protected gold nanoparticles have made possible the production of dodecane-thiolate saturated ∼4 ± 0.5 nm Au clusters with single-crystal core structure and morphology. An ultrathin ordered film or superlattice of these nanocrystal-core MPCs is prepared and investigated using aberration corrected scanning/transmission electron microscopy (STEM) which allowed imaging of long-range hexagonally ordered superlattices of the nanocrystals, separated by the thiolate groups. The lattice constants determined by direct imaging are in good agreement with those determined by small-angle electron diffraction. The STEM image revealed the characteristic grain boundary (GB) with sigma (Σ) 13 in the interface between two crystals. The formation and structures found are interpreted on the basis of theoretical calculations employing molecular dynamics (MD) simulations and coarse-grained (CG) approach.

One-step/one-pot decoration of oxide microparticles with silver nanoparticles.

HYPOTHESIS Heterogeneous nucleation of silver oxide (Ag2O) onto oxide microparticles (OMPs) followed by spontaneous thermal decomposition produce nanostructures made of OMPs decorated with silver nanoparticles (OMP|AgNPs). EXPERIMENTS Colloidal chemistry methods have been used to produce the decoration of OMPs with silver nanoparticles (AgNPs), by carrying out the Ag2O precipitation/thermal decomposition. The process is driven in water enriched acetone medium containing NaOH, NH3, AgNO3 and SiO2MPs as substrate. Optical and morphological properties of OMP|AgNPs were characterized by using STEM, EDS, HRTEM and Raman spectroscopy. FINDINGS A new synthetic method to decorate OMPs (TiO2, SiO2) with metallic AgNPs in a single step/single pot reaction is proven effective to produce OMP|AgNPs either in aqueous or water enriched media.

Characterization of conductive nanobiomaterials derived from viral assemblies by low-voltage STEM imaging and Raman scattering

New technologies require the development of novel nanomaterials that need to be fully characterized to achieve their potential. High-resolution low-voltage scanning transmission electron microscopy (STEM) has proven to be a very powerful technique in nanotechnology, but its use for the characterization of nanobiomaterials has been limited. Rotavirus VP6 self-assembles into nanotubular assemblies that possess an intrinsic affinity for Au ions. This property was exploited to produce hybrid nanobiomaterials by the in situ functionalization of recombinant VP6 nanotubes with gold nanoparticles. In this work, Raman spectroscopy and advanced analytical electron microscopy imaging with spherical aberration-corrected (Cs) STEM and nanodiffraction at low-voltage doses were employed to characterize nanobiomaterials. STEM imaging revealed the precise structure and arrangement of the protein templates, as well as the nanostructure and atomic arrangement of gold nanoparticles with high spatial sub-Angstrom resolution and avoided radiation damage. The imaging was coupled with backscattered electron imaging, ultra-high resolution scanning electron microscopy and x-ray spectroscopy. The hybrid nanobiomaterials that were obtained showed unique properties as bioelectronic conductive devices and showed enhanced Raman scattering by their precise arrangement into superlattices, displaying the utility of viral assemblies as functional integrative self-assembled nanomaterials for novel applications.

Electron diffraction and crystal orientation phase mapping under scanning transmission electron microscopy

Electron diffraction pattern acquisition in scanning transmission electron microscopy (STEM) mode is a very attractive technique for the study of the crystallographic characteristics of nanostructured materials. One of the most important aspects of this technique is to ensure an illumination on the sample as parallel as possible, which translates into reducing the convergence angle of the electron beam as much as possible. Different parameters of electron microscopes have a direct impact on the convergence angle of the electron beam; once these parameters are identified, and their effect on the convergence angle is studied, optimum conditions for the acquisition of electron diffraction patterns while in STEM mode (D-STEM) can be identified. In the present study, several of these parameters were identified and assessed; among these parameters we can mention the condenser aperture 2 size, the excitation of the condenser minilens, and the spot size used, among others. The results obtained allowed to identify the optimum conditions to produce a convergence angle smaller than 1 mrad, with an electron probe size smaller than 3 nm. When combined with precession electron diffraction (PED), this D-STEM technique allows obtaining crystal orientation phase maps with a spatial resolution determined mainly by the electron probe size. Several examples of these combined techniques applied to different nanostructured systems, like lead chalcogenide nanoparticles, Au clusters, GaN nanofilms, Co nanowires, and Au decahedral nanoparticles, are presented.

Study of Au/Pd and Au/Co bimetallic nanoparticles using aberration corrected STEM

The synergetic combination of two metals in bimetallic (BM) nanoparticle (NP) significantly changes the optical, catalytic, electronic and magnetic properties. The possible reason for synergetic effects is the heterometallic bond between two metals, dilution of active site, the combination of two kinds of metals and their fine structures. The enhanced catalytic properties of BM nanoparticles are widely used in several industrial reactions. For practical applications and better understanding of this system, there should be well-controlled synthesis of shape and size selected structures, powerful structural characterization tools including advanced in situ atomic-level analytical techniques, modern modeling tools with supercomputers, and in-depth understanding of structure-property relationship. In this paper, we are presenting the use of Z-contrast imaging in aberration-corrected HAADF STEM images in the study of atomic ordering in nanoalloys and core/shell and also investigating the growth mechanism in Au-Pd and the interface region between Au and Pd.