Subarna Khanal

Gold–Copper Nano-Alloy, “Tumbaga”, in the Era of Nano: Phase Diagram and Segregation

Gold–copper (Au–Cu) phases were employed already by pre-Columbian civilizations, essentially in decorative arts, whereas nowadays, they emerge in nanotechnology as an important catalyst. The knowledge of the phase diagram is critical to understanding the performance of a material. However, experimental determination of nanophase diagrams is rare because calorimetry remains quite challenging at the nanoscale; theoretical investigations, therefore, are welcomed. Using nanothermodynamics, this paper presents the phase diagrams of various polyhedral nanoparticles (tetrahedron, cube, octahedron, decahedron, dodecahedron, rhombic dodecahedron, truncated octahedron, cuboctahedron, and icosahedron) at sizes 4 and 10 nm. One finds, for all the shapes investigated, that the congruent melting point of these nanoparticles is shifted with respect to both size and composition (copper enrichment). Segregation reveals a gold enrichment at the surface, leading to a kind of core–shell structure, reminiscent of the historical artifacts. Finally, the most stable structures were determined to be the dodecahedron, truncated octahedron, and icosahedron with a Cu-rich core/Au-rich surface. The results of the thermodynamic approach are compared and supported by molecular-dynamics simulations and by electron-microscopy (EDX) observations.

Trimetallic nanostructures: the case of AgPd–Pt multiply twinned nanoparticles

We report the synthesis, structural characterization, and atomistic simulations of AgPd-Pt trimetallic (TM) nanoparticles. Two types of structure were synthesized using a relatively facile chemical method: multiply twinned core-shell, and hollow particles. The nanoparticles were small in size, with an average diameter of 11 nm and a narrow distribution, and their characterization by aberration corrected scanning transmission electron microscopy allowed us to probe the structure of the particles at an atomistic level. In some nanoparticles, the formation of a hollow structure was also observed, that facilitates the alloying of Ag and Pt in the shell region and the segregation of Ag atoms on the surface, affecting the catalytic activity and stability. We also investigated the growth mechanism of the nanoparticles using grand canonical Monte Carlo simulations, and we have found that Pt regions grow at overpotentials on the AgPd nanoalloys, forming 3D islands at the early stages of the deposition process. We found very good agreement between the simulated structures and those observed experimentally.

Highly monodisperse multiple twinned AuCu–Pt trimetallic nanoparticles with high index surfaces

Trimetallic nanoparticles possess different properties than their mono- and bi-metallic counterparts, opening a wide range of possibilities for diverse potential applications with the notion to study possible morphology, atomic ordering, reduce precious metal consumption and many others. In this paper, we present a comprehensive experimental study on AuCu-Pt trimetallic nanoparticles with an average diameter of 15 ± 1.0 nm, synthesized in a one-pot synthesis method and characterized by the Cs-corrected scanning transmission electron microscopy technique that allowed us to probe the structure at the atomic level resolution. A new way to control the nanoparticle morphology by the presence of third metal (Pt) is also discussed by the overgrowth of Pt on the as prepared AuCu core by Frank-van der Merwe (FM) layer-by-layer and Stranski-Krastanov (SK) island-on-wetting-layer growth modes. With the application of this research, we are now a step closer to produce optimum catalysts in which the active phase forms only surface monolayers. In addition, the nanoalloy exhibits high index facet surfaces with {211} and {321} families that are highly open-structure surfaces and are interesting for the catalytic applications.

CuS2-Passivated Au-Core, Au3Cu-Shell Nanoparticles Analyzed by Atomistic-Resolution Cs-Corrected STEM

Au-core, Au3Cu-alloyed shell nanoparticles passivated with CuS2 were fabricated by the polyol method, and characterized by Cs-corrected scanning transmission electron microscopy. The analysis of the high-resolution micrographs reveals that these nanoparticles have decahedral structure with shell periodicity, and that each of the particles is composed by Au core and Au3Cu alloyed shell surrounded by CuS2 surface layer. X-ray diffraction measurements and results from numerical simulations confirm these findings. From the atomic resolution micrographs, we identified edge dislocations at the twin boundaries of the particles, as well as evidence of the diffusion of Cu atoms into the Au region, and the reordering of the lattice on the surface, close to the vertices of the particle. These defects will impact the atomic and electronic structures, thereby changing the physical and chemical properties of the nanoparticles. On the other hand, we show for the first time the formation of an ordered superlattice of Au3Cu and a self-capping layer made using one of the alloy metals. This has significant consequences on the physical mechanism that form multicomponent nanoparticles.

Origin and shape evolution of core–shell nanoparticles in Au–Pd: from few atoms to high Miller index facets

Au–Pd core–shell nanocubes and triangular nanoparticles were systematically synthesized from a few Pd layers up to fully grown morphologies by a modified seed-mediated growth method. The shape evolution of Au–Pd core–shell nanoparticles from single crystal and singly twinned seed to final concave nanocube and triangular plates are presented at atomic level by Cs-corrected scanning transmission electron microscopy (STEM). The growth mechanism of both morphologies was studied throughout different sizes. It was found that the concave nanocubes grew from octahedral Au seeds due to fast growth along 〈111〉 directions; while the triangular nanoparticles grew from singly twinned Au seeds, growing twice as fast in 〈110〉 directions along the twin boundary; compared to the 〈111〉 direction perpendicular to the twin boundary. Both the concave nanocubes and triangular nanoparticles presented high index facet (HIF) surfaces that will increase the catalytic activity of different reactions.

Synthesis, characterization, and growth simulations of Cu–Pt bimetallic nanoclusters

Summary Highly monodispersed Cu–Pt bimetallic nanoclusters were synthesized by a facile synthesis approach. Analysis of transmission electron microscopy (TEM) and spherical aberration (C s)-corrected scanning transmission electron microscopy (STEM) images shows that the average diameter of the Cu–Pt nanoclusters is 3.0 ± 1.0 nm. The high angle annular dark field (HAADF-STEM) images, intensity profiles, and energy dispersive X-ray spectroscopy (EDX) line scans, allowed us to study the distribution of Cu and Pt with atomistic resolution, finding that Pt is embedded randomly in the Cu lattice. A novel simulation method is applied to study the growth mechanism, which shows the formation of alloy structures in good agreement with the experimental evidence. The findings give insight into the formation mechanism of the nanosized Cu–Pt bimetallic catalysts.

Structural order in ultrathin films of the monolayer protected clusters based upon 4 nm gold nanocrystals: an experimental and theoretical study

The structural order in ultrathin films of monolayer protected clusters (MPCs) is important in a number of application areas but can be difficult to demonstrate by conventional methods, particularly when the metallic core dimension, d, is in the intermediate size-range, 1.5 < d < 5.0 nm. Here, improved techniques for the synthesis of monodisperse thiolate-protected gold nanoparticles have made possible the production of dodecane-thiolate saturated ∼4 ± 0.5 nm Au clusters with single-crystal core structure and morphology. An ultrathin ordered film or superlattice of these nanocrystal-core MPCs is prepared and investigated using aberration corrected scanning/transmission electron microscopy (STEM) which allowed imaging of long-range hexagonally ordered superlattices of the nanocrystals, separated by the thiolate groups. The lattice constants determined by direct imaging are in good agreement with those determined by small-angle electron diffraction. The STEM image revealed the characteristic grain boundary (GB) with sigma (Σ) 13 in the interface between two crystals. The formation and structures found are interpreted on the basis of theoretical calculations employing molecular dynamics (MD) simulations and coarse-grained (CG) approach.

Citrate Stabilized Silver Nanoparticles: Study of Crystallography and Surface Properties

Citrate stabilized silver (Ag) colloidal solution were synthesized and characterized for crystallographic and surface properties by using transmission electron microscopy (TEM) and zeta potential measurement techniques. TEM investigation depicted the size of Ag o ranges from 5 to 50 nm with smaller particles having single crystal structure while larger particles with structural defects (such as multiply twinned, high coalescence and Moire patterns). ζ-potential measurement confirms the presence of Ag + in nAg stock solution. The shift in ζ-potential measurement by +25.1 mV in the filtered solution suggests the presence of Ag + in Ag o nanoparticles.

Advanced electron microscopy in the study of multimetallic nanoparticles

Metal nanoparticles have led to exciting progress in a versatile array of applications. For the purpose of better tailoring of nanoparticle activities and understanding the correlation between their structures and properties, control over the composition, shape, size, and morphology of multimetallic nanoparticles plays an important role on revealing their novel or enhanced functions for potential application. In this chapter, we give an overview of various chemical synthesis techniques, and advanced electron microscopy characterization techniques including Z-contrast imaging, microanalysis, tomography, geometrical phase analysis, and holography were used to provide an atomic-scale insight into the structure–properties of different materials: Au/Pd, Au/Co, Pt/Pd, Au/Cu, Ag/Pd/Pt, and Au/Cu/Pt nanoparticles.

Cu-Ni nano-alloy

Bimetallic nanoparticles like Cu-Ni are particularly attractive due to their magnetic and catalytic properties; however, their properties depend strongly on the structure of the alloy i.e. mixed, core-shell or Janus. To predict the alloy structure, this paper investigates the size and shape effects as well as the surface segregation effect on the Cu-Ni phase diagram. Phase maps have been plotted to determine the mixing/demixing behavior of this alloy according the particle shape. Cu-Ni nanoalloy can form a mixed particle or a Janus one depending on the synthesis temperature. Surface segregation is also considered and reveals a nickel surface-enrichment. Finally, this paper provides a useful roadmap for experimentalists.