Daniel Gensler

Oxygen enhanced lung MRI by simultaneous measurement of T1 and T2* during free breathing using ultrashort TE

To provide a robust method for the simultaneous quantification of T1 and T2* in the human lung during free breathing. Breathing pure oxygen accelerates T1 and T2* relaxation in the lung. While T1 shortening reflects an increased amount of dissolved molecular oxygen in lung tissue, T2* shortening shows an increased concentration of oxygen in the alveolar gas. Therefore, both parameters reflect different aspects of the oxygen uptake and provide complementary lung functional information.

Impact of imaging landmark on the risk of MRI‐related heating near implanted medical devices like cardiac pacemaker leads

Implanted medical devices such as cardiac pacemakers pose a potential hazard in magnetic resonance imaging. Electromagnetic fields have been shown to cause severe radio frequency‐induced tissue heating in some cases. Imaging exclusion zones have been proposed as an instrument to reduce patient risk. The purpose of this study was to further assess the impact of the imaging landmark on the risk for unintended implant heating by measuring the radio frequency‐induced electric fields in a body phantom under several imaging conditions at 1.5T. The results show that global radio frequency‐induced coupling is highest with the torso centered along the superior–inferior direction of the transmit coil. The induced E‐fields inside the body shift when changing body positioning, reducing both global and local radio frequency coupling if body and/or conductive implant are moved out from the transmit coil center along the z‐direction. Adequate selection of magnetic resonance imaging landmark can significantly reduce potential hazards in patients with implanted medical devices. Magn Reson Med, 2010.

Reducing RF-related heating of cardiac pacemaker leads in MRI: implementation and experimental verification of practical design changes.

There are serious concerns regarding safety when performing magnetic resonance imaging in patients with implanted conductive medical devices, such as cardiac pacemakers, and associated leads, as severe incidents have occurred in the past. In this study, several approaches for altering an implants lead design were systematically developed and evaluated to enhance the safety of implanted medical devices in a magnetic resonance imaging environment. The individual impact of each design change on radiofrequency heating was then systematically investigated in functional lead prototypes at 1.5 T. Radiofrequency‐induced heating could be successfully reduced by three basic changes in conventional pacemaker lead design: (1) increasing the lead tip area, (2) increasing the lead conductor resistance, and (3) increasing outer lead insulation conductivity. The findings show that radiofrequency energy pickup in magnetic resonance imaging can be reduced and, therefore, patient safety can be improved with dedicated construction changes according to a “safe by design” strategy. Incorporation of the described alterations into implantable medical devices such as pacemaker leads can be used to help achieve favorable risk‐benefit‐ratios when performing magnetic resonance imaging in the respective patient group. Magn Reson Med, 2012.

MR safety: Fast T1 thermometry of the RF‐induced heating of medical devices

Determining the MR compatibility of medical implants and devices is becoming increasingly relevant. In most cases, the heating of conductive implants due to radiefrequency (RF) excitation pulses is measured by fluoroptic temperature sensors in relevant tests for approval. Another common method to determine these heating effects is MR thermometry using the proton resonance frequency. This method gives good results in homogeneous phantoms. However in many cases, technical shortcomings such as susceptibility artifacts prohibit exact proton resonance frequency thermometry near medical implants. Therefore, this work aimed at developing a fast T1‐based method which allows controlled MR‐related heating of a medical implant while simultaneously quantifying the spatial and temporal temperature distribution. To this end, an inversion recovery snapshot Fast Low‐Angle Shot (FLASH) sequence was modified with additional off‐resonant heating pulses. With an accelerated imaging method and a sliding‐window technique, every 7.6 s a new temperature map could be generated with a spatial in‐plane resolution of 2 mm. The temperature deviation from calculated temperature values to reference fluoroptic probe was found to be smaller than 1 K. Magn Reson Med, 2012.

Myocardial T1: Quantification by Using an ECG-triggered Radial Single-Shot Inversion-Recovery MR Imaging Sequence

PURPOSE To develop and validate a fast cardiac magnetic resonance imaging T1 mapping technique with high spatial resolution based on a radial inversion-recovery (IR) spoiled gradient-echo acquisition. MATERIALS AND METHODS Approval for the study was granted by the local institutional review board, and all subjects gave written informed consent. An electrocardiographically triggered radial single-shot IR (TRASSI) sequence was developed in conjunction with a custom-written fitting algorithm. The proposed imaging technique was validated in phantom measurements and then used for cardiac T1 mapping in 62 subjects with or without cardiac disease. The study population included 51 healthy subjects, three patients with arrhythmia, and eight patients with myocardial infarction. The potential heart rate dependency of the TRASSI method was tested by using linear regression analysis. Statistically significant differences between the sexes and various section orientations were analyzed with a Student t test for independent groups and a repeated-measures analysis of variance for dependent groups. RESULTS High-spatial-resolution T1 maps (1.17 × 1.17 mm) without motion artifacts and without heart rate dependency (slope = -0.0303, R(2) = 0.0000887, P = .899) were acquired with an acquisition time of less than 6 seconds in all subjects. The mean T1 of healthy left ventricular myocardium across all examined subjects was 1031 msec ± 33 (standard deviation). Testing for reproducibility in three individuals with 34 repetitive measurements revealed a mean standard deviation of 4.1 msec (0.412%). Subacute and chronic myocardial infarction could be detected in all eight patients. T1 disturbances due to arrhythmia proved to be minimal in three patients (standard deviation, <1.2%). CONCLUSION Fast and accurate cardiac T1 mapping is feasible within a single-shot IR experiment.

Impact of Thoracic Surgery on Cardiac Morphology and Function in Small Animal Models of Heart Disease: A Cardiac MRI Study in Rats

Background Surgical procedures in small animal models of heart disease might evoke alterations in cardiac morphology and function. The aim of this study was to reveal and quantify such potential artificial early or long term effects in vivo, which might account for a significant bias in basic cardiovascular research, and, therefore, could potentially question the meaning of respective studies. Methods Female Wistar rats (n = 6 per group) were matched for weight and assorted for sham left coronary artery ligation or control. Cardiac morphology and function was then investigated in vivo by cine magnetic resonance imaging at 7 Tesla 1 and 8 weeks after the surgical procedure. The time course of metabolic and inflammatory blood parameters was determined in addition. Results Compared to healthy controls, rats after sham surgery showed a lower body weight both 1 week (267.5±10.6 vs. 317.0±11.3 g, n<0.05) and 8 weeks (317.0±21.1 vs. 358.7±22.4 g, n<0.05) after the intervention. Left and right ventricular morphology and function were not different in absolute measures in both groups 1 week after surgery. However, there was a confined difference in several cardiac parameters normalized to the body weight (bw), such as myocardial mass (2.19±0.30/0.83±0.13 vs. 1.85±0.22/0.70±0.07 mg left/right per g bw, p<0.05), or enddiastolic ventricular volume (1.31±0.36/1.21±0.31 vs. 1.14±0.20/1.07±0.17 µl left/right per g bw, p<0.05). Vice versa, after 8 weeks, cardiac masses, volumes, and output showed a trend for lower values in sham operated rats compared to controls in absolute measures (782.2±57.2/260.2±33.2 vs. 805.9±84.8/310.4±48.5 mg, p<0.05 for left/right ventricular mass), but not normalized to body weight. Matching these findings, blood testing revealed only minor inflammatory but prolonged metabolic changes after surgery not related to cardiac disease. Conclusion Cardio-thoracic surgical procedures in experimental myocardial infarction cause distinct alterations upon the global integrity of the organism, which in the long term also induce circumscribed repercussions on cardiac morphology and function. This impact has to be considered when analyzing data from respective animal studies and transferring these findings to conditions in patients.

Direct cooling of the catheter tip increases safety for CMR-guided electrophysiological procedures

BackgroundOne of the safety concerns when performing electrophysiological (EP) procedures under magnetic resonance (MR) guidance is the risk of passive tissue heating due to the EP catheter being exposed to the radiofrequency (RF) field of the RF transmitting body coil. Ablation procedures that use catheters with irrigated tips are well established therapeutic options for the treatment of cardiac arrhythmias and when used in a modified mode might offer an additional system for suppressing passive catheter heating.MethodsA two-step approach was chosen. Firstly, tests on passive catheter heating were performed in a 1.5 T Avanto system (Siemens Healthcare Sector, Erlangen, Germany) using a ASTM Phantom in order to determine a possible maximum temperature rise. Secondly, a phantom was designed for simulation of the interface between blood and the vascular wall. The MR-RF induced temperature rise was simulated by catheter tip heating via a standard ablation generator. Power levels from 1 to 6 W were selected. Ablation duration was 120 s with no tip irrigation during the first 60 s and irrigation at rates from 2 ml/min to 35 ml/min for the remaining 60 s (Biotronik Qiona Pump, Berlin, Germany). The temperature was measured with fluoroscopic sensors (Luxtron, Santa Barbara, CA, USA) at a distance of 0 mm, 2 mm, 4 mm, and 6 mm from the catheter tip.ResultsA maximum temperature rise of 22.4°C at the catheter tip was documented in the MR scanner. This temperature rise is equivalent to the heating effect of an ablators power output of 6 W at a contact force of the weight of 90 g (0.883 N). The catheter tip irrigation was able to limit the temperature rise to less than 2°C for the majority of examined power levels, and for all examined power levels the residual temperature rise was less than 8°C.ConclusionUp to a maximum of 22.4°C, the temperature rise at the tissue surface can be entirely suppressed by using the catheters own irrigation system. The irrigated tip system can be used to increase MR safety of EP catheters by suppressing the effects of unwanted passive catheter heating due to RF exposure from the MR scanner.

Value of the CHA2DS2-VASc score and Fabry-specific score for predicting new-onset or recurrent stroke/TIA in Fabry disease patients without atrial fibrillation

ObjectivesTo evaluate potential risk factors for stroke or transient ischemic attacks (TIA) and to test the feasibility and efficacy of a Fabry-specific stroke risk score in Fabry disease (FD) patients without atrial fibrillation (AF).BackgroundFD patients often experience cerebrovascular events (stroke/TIA) at young age.Methods159 genetically confirmed FD patients without AF (aged 40 ± 14 years, 42.1% male) were included, and risk factors for stroke/TIA events were determined. All patients were followed up over a median period of 60 (quartiles 35–90) months. The pre-defined primary outcomes included new-onset or recurrent stroke/TIA and all-cause death.ResultsPrior stroke/TIA (HR 19.97, P < .001), angiokeratoma (HR 4.06, P = .010), elevated creatinine (HR 3.74, P = .011), significant left ventricular hypertrophy (HR 4.07, P = .017), and reduced global systolic strain (GLS, HR 5.19, P = .002) remained as independent risk predictors of new-onset or recurrent stroke/TIA in FD patients without AF. A Fabry-specific score was established based on above defined risk factors, proving somehow superior to the CHA2DS2-VASc score in predicting new-onset or recurrent stroke/TIA in this cohort (AUC 0.87 vs. 0.75, P = .199).ConclusionsPrior stroke/TIA, angiokeratoma, renal dysfunction, left ventricular hypertrophy, and global systolic dysfunction are independent risk factors for new-onset or recurrent stroke/TIA in FD patients without AF. It is feasible to predict new or recurrent cerebral events with the Fabry-specific score based on the above defined risk factors. Future studies are warranted to test if FD patients with high risk for new-onset or recurrent stroke/TIA, as defined by the Fabry-specific score (≥ 2 points), might benefit from antithrombotic therapy. Clinical trial registration HEAL-FABRY (evaluation of HEArt invoLvement in patients with FABRY disease, NCT03362164).