David McGloin

Simultaneous micromanipulation in multiple planes using a self-reconstructing light beam

Optical tweezers are commonly used for manipulating microscopic particles, with applications in cell manipulation, colloid research, manipulation of micromachines and studies of the properties of light beams. Such tweezers work by the transfer of momentum from a tightly focused laser to the particle, which refracts and scatters the light and distorts the profile of the beam. The forces produced by this process cause the particle to be trapped near the beam focus. Conventional tweezers use gaussian light beams, which cannot trap particles in multiple locations more than a few micrometres apart in the axial direction, because of beam distortion by the particle and subsequent strong divergence from the focal plane. Bessel beams, however, do not diverge and, furthermore, if part of the beam is obstructed or distorted the beam reconstructs itself after a characteristic propagation distance. Here we show how this reconstructive property may be utilized within optical tweezers to trap particles in multiple, spatially separated sample cells with a single beam. Owing to the diffractionless nature of the Bessel beam, secondary trapped particles can reside in a second sample cell far removed (∼3 mm) from the first cell. Such tweezers could be used for the simultaneous study of identically prepared ensembles of colloids and biological matter, and potentially offer enhanced control of ‘lab-on-a-chip’ and optically driven microstructures.

Interfering Bessel beams for optical micromanipulation

We examine the properties of interfering high-order Bessel beams. We implement an experimental setup that allows us to realize these interferograms, using interfering Laguerre-Gaussian beams and an axicon. We demonstrate the use of such beams for controlled rotation of microscopic particles in optical tweezers and rotators. The self-healing properties of interfering Bessel beams allow the simultaneous manipulation and rotation of particles in spatially separated sample cells.

Optical levitation in a Bessel light beam

A vertically oriented zero order Bessel light beam is shown to create a one-dimensional array of trapped particles over extended (millimeter) distances. The particles take up equilibrium positions over the entire length of the beam and this is a consequence of the interplay between optical scattering and the self-healing properties of the Bessel beam. This work has analogies to recent studies of optically bound matter and allows for the simple creation of one-dimensional particle chains and their subsequent spectroscopic analysis.

Holographic optical trapping of aerosol droplets

We demonstrate the use of holographic optical tweezers for trapping particles in air, specifically aerosol droplets. We show the trapping and manipulation of arrays of liquid aerosols as well as the controlled coagulation of two or more droplets. We discuss the ability of spatial light modulators to manipulate airborne droplets in real time as well as highlight the difficulties associated with loading and trapping particles in such an environment. We conclude with a discussion of some of the applications of such a technique.

Applications of spatial light modulators in atom optics

We discuss the application of spatial light modulators (SLMs) to the field of atom optics. We show that SLMs may be used to generate a wide variety of optical potentials that are useful for the guiding and dipole trapping of atoms. This functionality is demonstrated by the production of a number of different light potentials using a single SLM device. These include Mach-Zender interferometer patterns and the generation of a bottle-beam. We also discuss the current limitations in SLM technology with regard to the generation of both static and dynamically deformed potentials and their use in atom optics.

Optical Tweezers With Increased Axial Trapping Efficiency

We demonstrate that the axial trapping efficiency in optical tweezers is improved by using a Laguerre-Gaussian laser mode as the trapping beam. For a wide range of particle sizes and sample cell depths, the laser power required with an l = 3 Laguerre-Gaussian mode is reduced by a factor of two compared with that of the fundamental mode. This is important for biological applications where a reduction in the laser power lessens the risk of damage to living samples.

Optical tweezers: 20 years on

In 1986, Arthur Ashkin and colleagues published a seminal paper in Optics Letters, ‘Observation of a single-beam gradient force optical trap for dielectric particles’ which outlined a technique for trapping micrometre-sized dielectric particles using a focused laser beam, a technology which is now termed optical tweezers. This paper will provide a background in optical manipulation technologies and an overview of the applications of optical tweezers. It contains some recent work on the optical manipulation of aerosols and concludes with a critical discussion of where the future might lead this maturing technology.

Optical trapping of three-dimensional structures using dynamic holograms

We demonstrate the use of a spatial light modulator (SLM) to facilitate the trapping of particles in three-dimensional structures through time-sharing. This method allows particles to be held in complex, three-dimensional configurations using cycling of simple holograms. Importantly, we discuss limiting factors inherent in current phase only SLM design for applications in both optical tweezing and atom trapping.

Transfer of orbital angular momentum from a stressed fiber-optic waveguide to a light beam.

A stressed fiber-optic waveguide is used to impart orbital angular momentum to a Hermite-Gaussian (HG(10)) laser mode. The transmitted beam has an annular intensity profile and a well-defined azimuthal phase dependence. We confirm the phase structure of the beam by observing the interference pattern produced between it and a plane wave. The transfer of the angular momentum to the light occurs because of a difference in phase velocity within the fiber for two orthogonal modes that comprise the input beam. This represents a mechanism for the transfer of orbital angular momentum to a light beam that has not hitherto been identified.

Thermocapillary manipulation of droplets using holographic beam shaping: Microfluidic pin ball

We demonstrate that holographically generated optical patterns offer greater flexibility for the thermocapillary control of water droplets than Gaussian spots; droplets can be stopped in faster flows while using less optical intensity when the surface tension variations are created by line patterns instead of single spots. Further, experiments are performed making use of variable light patterns to achieve controlled droplet routing in a four-way cross microfluidic channel. Finally, multiple droplet storage is demonstrated as well as changing drop order.