David Z. Ting

A high-performance long wavelength superlattice complementary barrier infrared detector

We describe a long wavelength infrared detector where an InAs/GaSb superlattice absorber is surrounded by a pair of electron-blocking and hole-blocking unipolar barriers. A 9.9 μm cutoff device without antireflection coating based on this complementary barrier infrared detector design exhibits a responsivity of 1.5 A/W and a dark current density of 0.99×10−5 A/cm2 at 77 K under 0.2 V bias. The detector reaches 300 K background limited infrared photodetection (BLIP) operation at 87 K, with a black-body BLIP D∗ value of 1.1×1011 cm Hz1/2/W for f/2 optics under 0.2 V bias.

640/spl times/486 long-wavelength two-color GaAs/AlGaAs quantum well infrared photodetector (QWIP) focal plane array camera

We have designed and fabricated an optimized long-wavelength/very-long wavelength two-color quantum well infrared photodetector (QWIP) device structure. The device structure was grown on a 3-in semi-insulating GaAs substrate by molecular beam epitaxy (MBE). The wafer was processed into several 640/spl times/486 format monolithically integrated 8-9 and 14-15 /spl mu/m two-color (or dual wavelength) QWIP focal plane arrays (FPAs). These FPAs were then hybridized to 640/spl times/486 silicon CMOS readout multiplexers. A thinned (i.e., substrate removed) FPA hybrid was integrated into a liquid helium cooled dewar for electrical and optical characterization and to demonstrate simultaneous two-color imagery. The 8-9 /spl mu/m detectors in the FPA have shown background limited performance (BLIP) at 70 K operating temperature for 300 K background with f/2 cold stop. The 14-15 /spl mu/m detectors of the FPA reaches BLIP at 40 K operating temperature under the same background conditions. In this paper we discuss the performance of this long-wavelength dualband QWIP FPA in terms of quantum efficiency, detectivity, noise equivalent temperature difference (NE/spl Delta/T), uniformity, and operability.

640

Epitaxially grown self-assembled InAs-InGaAs-GaAs quantum dots (QDs) are exploited for the development of large-format long-wavelength infrared focal plane arrays (FPAs). The dot-in-a-well (DWELL) structures were experimentally shown to absorb both 45deg and normal incident light, therefore, a reflection grating structure was used to enhance the quantum efficiency. The devices exhibit peak responsivity out to 8.1 mum, with peak detectivity reaching ~1times1010 Jones at 77 K. The devices were fabricated into the first long-wavelength 640times512 pixel QD infrared photodetector imaging FPA, which has produced excellent infrared imagery with noise equivalent temperature difference of 40 mK at 60-K operating temperature

\,\times\,

The electrical properties of CdTe and Cd1−xZnxTe crystals grown under excess tellurium by a modified Bridgman technique are critically dependent on the zinc content. Below an x value of 0.07, the as-grown CdZnTe crystals are n type while, above this value, CdZnTe crystals are p type. The origin of the shallow donor level at 0.01 eV below the conduction band is most likely singly ionized Te antisites (Te at Cd sites). The origin of the deep donor level at 0.75 eV below the conduction band is therefore doubly ionized tellurium antisites. Based on this model, the conduction type of CdZnTe crystals is determined by the results of compensation between the shallow donors of Te antisites and the shallow acceptors of Cd vacancies. High resistivity Cd0.9Zn0.1Te crystals are produced by compensating the p-type crystals with indium impurity at a low doping level of 1–5×1015 cm−3. At room temperature, CdZnTe radiation detectors can resolve the six low energy peaks in the 241Am spectrum, a performance comparable to th...

512 Pixels Long-Wavelength Infrared (LWIR) Quantum-Dot Infrared Photodetector (QDIP) Imaging Focal Plane Array

We present a device concept for a spintronic transistor based on the spin relaxation properties a two-dimensional electron gas (2DEG). The device design is very similar to that of the Datta and Das spin transistor. However, our proposed device works in the diffusive regime rather than in the ballistic regime. This eases lithographical and processing requirements. The switching action is achieved through the biasing of a gate contact, which controls the lifetime of spins injected into the 2DEG from a ferromagnetic emitter, thus allowing the traveling spins to be either aligned with a ferromagnetic collector or randomizing them before collection. The device configuration can easily be turned into a memory and a readout head for magnetically stored information.

Tellurium antisites in CdZnTe

Publisher Summary This chapter provides an overview of type-II superlattice infrared detectors. The type-II InAs/GaSb superlattices have several fundamental properties that make them suitable for infrared detection: (1) their band gaps can be made arbitrarily small by design, (2) they are more immune to band-to-band tunneling compared with bulk material, (3) the judicious use of strain in type-II InAs/GaInSb strained layer superlattice (SLS) can enhance its absorption strength over that of the type-II InAs/GaSb superlattice to a level comparable with HgVdTe (MCT), and (4) type-II InAs/Ga(In)Sb superlattices also reduce Auger recombination. In addition, the dark current characteristics of type-II superlattice-based single element long-wavelength infrared (LWIR) detectors are currently approaching state-of-the-art MCT detector. Noise measurements highlight the need for surface leakage suppression, which can be tackled by improved etching, passivation, and device design. The chapter also describes the principles behind advanced superlattice infrared detectors based on heterostructure designs. It also explores some aspects of device fabrication and characterization.

A resonant spin lifetime transistor

We describe the concept of the submonolayer quantum dot infrared photodetector (SML QDIP) and report experimental device results on long-wavelength infrared detection. An SML QDIP structure was fabricated into megapixel focal plane arrays, which produced clear infrared images up to 80 K. Detectors in the focal plane showed a responsivity peak at 7.8 μm and noise equivalent temperature difference of 33 mK at 70 K.We describe the concept of the submonolayer quantum dot infrared photodetector (SML QDIP) and report experimental device results on long-wavelength infrared detection. An SML QDIP structure was fabricated into megapixel focal plane arrays, which produced clear infrared images up to 80 K. Detectors in the focal plane showed a responsivity peak at 7.8 μm and noise equivalent temperature difference of 33 mK at 70 K.

Type-II Superlattice Infrared Detectors

In the past decade, there has been active research on infrared detectors based on intersubband transitions in self-assembled quantum dots (QDs). In the past two years, at least four research groups have independently demonstrated focal plane arrays based on this technology. In this paper, the progress from the first raster scanned image obtained with a QD detector to the demonstration of a 640 512 imager based on self-assembled QDs is reviewed. In particular, emphasis will be placed on a novel quantum dots-in-a-well (DWELL) design, which represents a hybrid between a conventional quantum-well infrared photodetector (QWIP) and a quantum-dot infrared photodetector (QDIP). In the DWELL detectors, the active region consists of InAs quantum dots embedded in an InGaAs quantum well. Like QDIPs, the DWELL detectors have 3-D confinement and display normal incidence operation while demonstrating reproducible ldquodial-in recipesrdquo for control over the operating wavelength, like QWIPs. Moreover, the DWELL detectors also have demonstrated bias-tunability and multicolor operation in the midwave infrared (MWIR, 3-5 ), long-wave infrared (LWIR, 8-12 ), and very long wave infrared (VLWIR, ) regimes. Recently midformat 320 256 and 640 512 focal plane arrays (FPAs) with an NETD of 40 mK at have been reported. The paper will conclude with a perspective on the future directions on the research on QDIP FPA including enhanced functionality and higher operating temperatures.

Submonolayer quantum dot infrared photodetector

Optical modulation response is used to study the influence of radiative, Shockley-Read-Hall, and Auger recombination processes on the minority carrier lifetime in a mid-wave infrared InAs/InAsSb superlattice. A comparison of calculated and measured temperature dependencies shows that the lifetime is influenced mainly by radiative recombination at low temperatures, resulting in an increase of the minority carrier lifetime from 1.8 μs at 77 K to 2.8 μs at 200 K. At temperatures above 200 K, Auger recombination increases rapidly and limits the lifetime. Shockley-Read-Hall limited lifetimes on the order of 10 μs are predicted for superlattices with lower background doping concentration.

Quantum Dot Based Infrared Focal Plane Arrays

We propose an InAs/GaSb/AlSb-based asymmetric resonant interband tunneling diode as a spin filter. The interband design exploits large valence band spin–orbit interaction to provide strong spin selectivity, without suffering from fast hole spin relaxation. Spin filtering efficiency is also enhanced by the reduction of tunneling through quasibound states near the zone center, where spin spitting vanishes and spin selectivity is difficult. Our calculations show that, when coupled with an emitter or collector capable of lateral momentum selectivity, the asymmetric resonant interband tunneling diode can achieve significant spin filtering in conventional nonmagnetic semiconductor heterostructures under zero magnetic field.