Delfim Santos

Preparation, characterization and biocompatibility studies on risperidone-loaded solid lipid nanoparticles (SLN): high pressure homogenization versus ultrasound.

The suitability of solid lipid nanoparticles (SLN) for the encapsulation of risperidone (RISP), an antipsychotic lipophilic drug, was assessed for oral administration. The hot high pressure homogenization (HPH) and the ultrasound (US) technique were used as production methods for SLN. All the studies on the SLN formulations were done in parallel, in order to compare the results and conclude about the advantages and limitations of both techniques. The particle sizes were in the nanometer range for all prepared SLN formulations and the zeta potential absolute values were high, predicting good long-term stability. Optical analyses demonstrated the achievement of stable colloidal dispersions. Physicochemical characterization of dispersions and bulk lipids, performed by differential scanning calorimetry (DSC) and X-ray assays, support prediction of occurrence of drug incorporation in the SLN and good long term stability of the systems. The toxicity of SLN with Caco-2 cells and the existence of contaminations derived from the production equipments were assessed by the (4,5-dimethylthiazol-2-yl)2,5-diphenyl-tetrazolium bromide (MTT) assay. The results showed 90% of cell viability after SLN exposure, with no significant differences within all prepared formulations (p > 0.05). From this study, we conclude that SLN can be considered as efficient carriers for RISP encapsulation. Moreover, HPH and US revealed to be both effective methods for SLN production.

Bioinspired imprinted PHEMA-hydrogels for ocular delivery of carbonic anhydrase inhibitor drugs.

Hydrogels with high affinity for carbonic anhydrase (CA) inhibitor drugs have been designed trying to mimic the active site of the physiological metallo-enzyme receptor. Using hydroxyethyl methacrylate (HEMA) as the backbone component, zinc methacrylate, 1- or 4-vinylimidazole (1VI or 4VI), and N-hydroxyethyl acrylamide (HEAA) were combined at different ratios to reproduce in the hydrogels the cone-shaped cavity of the CA, which contains a Zn(2+) ion coordinated to three histidine residues. 4VI resembles histidine functionality better than 1VI, and, consequently, pHEMA-ZnMA(2) hydrogels bearing 4VI moieties were those with the greatest ability to host acetazolamide or ethoxzolamide (2 to 3 times greater network/water partition coefficient) and to sustain the release of these antiglaucoma drugs (50% lower release rate estimated by fitting to the square root kinetics). The use of acetazolamide as template during polymerization did not enhance the affinity of the network for the drugs. In addition to the remarkable improvement in the performance as controlled release systems, the biomimetic hydrogels were highly cytocompatible and possessed adequate oxygen permeability to be used as medicated soft contact lenses or inserts. The results obtained highlight the benefits of mimicking the structure of the physiological receptors for the design of advanced drug delivery systems.

Solid lipid nanoparticles (SLN) - based hydrogels as potential carriers for oral transmucosal delivery of Risperidone: Preparation and characterization studies

Two different solid lipid nanoparticles (SLN)-based hydrogels (HGs) formulations were developed as potential mucoadhesive systems for risperidone (RISP) oral transmucosal delivery. The suitability of the prepared semi-solid formulations for application on oral mucosa was assessed by means of rheological and textural analysis, during 30 days. Plastic flows with thixotropy and high adhesiveness were obtained for all the tested systems, which predict their success for the oral transmucosal application proposed. The SLN remained within the colloidal range after HGs preparation. However, after 30 days of storage, a particle size increase was detected in one type of the HGs formulations. In vitro drug release studies revealed a more pronounced RISP release after SLN hydrogel entrapment, when compared to the dispersions alone. In addition, a pH-dependent release was observed as well. The predicted in vivo RISP release mechanism was Fickian diffusion alone or combined with erosion.

Preparation and Solid-State Characterization of Inclusion Complexes Formed Between Miconazole and Methyl-β-Cyclodextrin

The aim of this study is to confirm the formation of inclusion complexes between miconazole (MCZ) and two derivatives of beta-cyclodextrin, methyl-beta-cyclodextrin (MβCD) and 2-hydroxypropyl-beta-cyclodextrin (HPβCD) in aqueous solution by phase solubility studies. Inclusion complexes with MβCD in the solid state were then prepared by different methods, i.e., kneading, coevaporation (COE), spray-drying (SD), and lyophilization (LPh). The physicochemical properties of these complexes were subsequently studied by means of differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction techniques. Phase solubility diagrams with MβCD and HPβCD were classified as AP type, indicating the formation of 1:1 and 1:2 stoichiometric inclusion complexes. The apparent stability constants (KS) calculated from the phase solubility diagram were 145.69xa0M−1 (K1:1) and 11.11xa0M−1 (K1:2) for MβCD and 126.94xa0M−1 (K1:1) and 2.20xa0M−1 (K1:2) for HPβCD. The method of preparation of the inclusion complexes in the solid state was shown to greatly affect the properties of the formed complex. Hence, the LPh, SD, and COE methods produce true inclusion complexes between MCZ and MβCD. In contrast, crystalline drug was still clearly detectable in the kneaded (KN) product.

Lipid-based Nanocarriers As An Alternative for Oral Delivery of Poorly Water- Soluble Drugs: Peroral and Mucosal Routes

The hydrophobic character of most drug molecules and their potential for degradation under the hostile environment of the gastrointestinal tract (GIT) constitutes the main obstacle in the development of a successful oral drug delivery system, since these are related to limitations of bioavailability and absorption processes. However, according to the advantages of the oral route, alternative ways of drug administration in the oral cavity should be considered. In this context, it is essential to have a systematic knowledge of the GIT and the oral cavity components, for a better understanding of the processes taking place during the oral administration of drugs. This review gives an overview of those anatomical and physiological features and elucidates about the current approaches employed to enhance the bioavailability of oral poorly water-soluble drugs. Strategies including the uses of lipid-based nanocarriers, such as nanoemulsions, liposomes and lipid nanoparticles are discussed, considering their ability to improve solubility, dissolution kinetics, absorption and, consequently, biopharmaceutical properties. Some toxicological concerns are also highlighted.

Module assemblage technology for floating systems: In vitro flotation and in vivo gastro-retention

The aim of this research was to study, in vitro by resultant-weight measurement and in vivo by gamma-scintigraphy experiments in humans, the floatation behavior of systems obtained by modules assembled in void configuration. The assembled system technology allowed the manufacturing of a system characterized by the presence of an internal void space that provided an apparent density lower than water. The gastro-retention times of floating assembled systems were determined in comparison with non-floating systems having the same mass and composition. In vitro the floatation of the system started immediately after immersion in water and lasted for more than 5 h. The in vivo studies confirmed that the in vitro floating ability of void configuration was maintained also in the human stomach where the system stayed for periods of time ranging from 2.5 to 5.0 h, depending on the food regimen and the sex of the subject. Reiterate eating and drinking further prolonged the stomach residence time.

Preparações radiofarmacêuticas e suas aplicações

Radiopharmaceuticals are substances without pharmacological activity that are used in Nuclear Medicine for diagnosis and therapy for several diseases. Diagnosis radiopharmaceuticals generally emit g radiation or positrons (b+), because their decay originates penetrating electromagnetic radiation that can cross the tissues and be externally detected. Therapeutic radiopharmaceuticals must include in their composition ionized particles emission nucleus (a, b- or Auger electrons), since their action is based in selective tissue destruction. There are two main methods for image acquisition: SPECT (Single Photon Emission Computerized Tomography) that uses g emission radionuclides (99mTc, 123I, 67Ga, 201Tl) and PET (Positron Emission Tomography) that uses positron emission radionuclides like 11C, 13N, 15O, 18F. Radiopharmaceuticals can be classified into perfusion radiopharmaceuticals (first generation) or specific radiopharmaceuticals (second generation). Perfusion radiopharmaceuticals are transported in the blood e reach the target organ in the direct proportion of the blood stream. Specific radiopharmaceuticals contain a biologically active molecule that binds to cellular receptors that must remain biospecific after binding to the radiopharmaceutical. For this type of radiopharmaceuticals, tissue or organ uptake is determined by the biomolecule capacity of recognizing receptors in those biological structures. Radiopharmaceuticals are produced ready to use, in cold kits or in autologal preparations. According to the preparation type there is a different quality control procedure. Most of the radiopharmaceuticals used nowadays are of the perfusion type. Research focus in the development of specific radiopharmaceuticals that can provide information, at the molecular level, of biochemical alterations associated to different pathologies.

Further Knowledge on the Phenolic Profile of Colocasia esculenta (L.) Shott

Colocasia esculenta (L.) Shott, commonly called taro, is an ancient species selected for its edible tuber. Its huge elephant ear like leaves are also consumed in sauces and stews or as soups. Forty-one phenolic metabolites (11 hydroxycinnamic acid derivatives and 30 glycosylated flavonoids) were identified by high-performance liquid chromatography-diode array detection-electrospray ionization/mass spectrometry (HPLC-DAD-ESI/MS(n)) in the leaves of two C. esculenta varieties cultivated in Azores Islands. To our knowledge, 34 of the 41 phenolic compounds are being reported for the first time in this species. Phenolics quantification was achieved by an HPLC-DAD accurate and sensitive validated method. Although the qualitative profile of the two varieties is quite similar, quantitative differences were observed between them. Giant white and red varieties (local denomination) contain, respectively, ca. 14 and 21% of phenolic acids, 37 and 28% of flavones mono-C-glycosides, 42 and 43% of flavones di-C-glycosides, 3 and 4% of flavones mono-C-(O-glycosyl)glycosides, and both of them ca. 2% of flavones di-C-(O-glycosyl)glycosides and 2% of flavones-O-glycosides. Luteolin-6-C-hexoside was the compound present in higher amounts in both varieties. The established phenolic profile is an added value for the authenticity and quality control of C. esculenta and may be useful in the discrimination of its varieties.

Influence of taro (Colocasia esculenta L. Shott) growth conditions on the phenolic composition and biological properties

Colocasia esculenta (L.) Shott, commonly known as taro, is an essential food for millions of people. The leaves are consumed in sauces, purees, stews, and soups, being also used in wound healing treatment. Nowadays, the consumers demand for bioactive compounds from the diet led to the development of new agricultural strategies for the production of health-promoting constituents in vegetables. In this work, two strategies (variety choice and irrigation conditions) were considered in the cultivation of C. esculenta. The effect on the phenolic composition of the leaves was evaluated. Furthermore, a correlation between the biological activity of the different varieties and their chemical composition was established. Qualitative and quantitative differences in the phenolic composition were observed between varieties; furthermore, the irrigation conditions also influenced the composition. C. esculenta varieties were able to scavenge several oxidant species and to inhibit hyaluronidase, but data suggest that metabolites other than phenolics are involved. The results show that cultivation strategies can effectively modulate the accumulation of these types of bioactive compounds. Furthermore C. esculenta wound healing potential can be attributed, at least in part, to the protection of the wound site against oxidative/nitrosative damage and prevention of hyaluronic acid degradation.

Combining strategies to optimize a gel formulation containing miconazole: the influence of modified cyclodextrin on textural properties and drug release

Background: Miconazol, an antimycotic drug, is commonly formulated into semisolid formulations designed to be applied in the oral cavity to treat oral candidiasis. However, given its limited aqueous solubility, permeation through the biological membranes is low and therefore its activity is also limited. Cyclodextrins (CDs) have been widely used to increase the solubility and stability of poorly water-soluble drugs. Aim: The aim of this study is to formulate a gel containing an inclusion complex between a modified CD, methyl-β-cyclodextrin (MβCD), and miconazole (MCZ). The influence of the CD on the textural properties of the prepared gel and the drug release from formulation were evaluated. Methods: The gels were prepared using two polymers, Carbopol 71G and Pluronic F127, which were selected taking into account their bioadhesiveness and thermal-sensitive gelling properties, respectively. Texture profile analyses were performed at two different temperatures to ascertain the influence of the temperature on the gel texture properties. The in vitro MCZ release profiles from the prepared gel and the commercial gel formulations were evaluated and compared using modified Franz diffusion cells. Results: The addition of MβCD to the gel resulted in a decrease of the gel adhesiveness and firmness, and the MCZ release profile through f1 and f2 proved to be similar to the commercial product. Conclusions: A gel comprising miconazol in the form of an inclusion complex with MβCD showed suitable textural properties to be applied to the buccal mucosa. The MβCD enhanced the solubility of the MCZ in the gel formulation resulting in adequate in vitro drug release profiles.