Dennis L. Ashford
University of North Carolina at Chapel Hill
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Dennis L. Ashford.
Chemical Reviews | 2015
Dennis L. Ashford; Melissa K. Gish; Aaron K. Vannucci; M. Kyle Brennaman; Joseph L. Templeton; John M. Papanikolas; Thomas J. Meyer
Applications Dennis L. Ashford,† Melissa K. Gish,† Aaron K. Vannucci,‡ M. Kyle Brennaman,† Joseph L. Templeton,† John M. Papanikolas,† and Thomas J. Meyer*,† †Department of Chemistry, University of North Carolina at Chapel Hill, CB 3290, Chapel Hill, North Carolina 27599, United States ‡Department of Chemistry and Biochemistry, University of South Carolina, Columbia, South Carolina 29208, United States
Journal of the American Chemical Society | 2016
M. Kyle Brennaman; Robert J. Dillon; Leila Alibabaei; Melissa K. Gish; Christopher J. Dares; Dennis L. Ashford; Ralph L. House; Gerald J. Meyer; John M. Papanikolas; Thomas J. Meyer
The dye-sensitized photoelectrosynthesis cell (DSPEC) integrates high bandgap, nanoparticle oxide semiconductors with the light-absorbing and catalytic properties of designed chromophore-catalyst assemblies. The goals are photoelectrochemical water splitting into hydrogen and oxygen and reduction of CO2 by water to give oxygen and carbon-based fuels. Solar-driven water oxidation occurs at a photoanode and water or CO2 reduction at a cathode or photocathode initiated by molecular-level light absorption. Light absorption is followed by electron or hole injection, catalyst activation, and catalytic water oxidation or water/CO2 reduction. The DSPEC is of recent origin but significant progress has been made. It has the potential to play an important role in our energy future.
Journal of the American Chemical Society | 2014
Dennis L. Ashford; Alexander M. Lapides; Aaron K. Vannucci; Kenneth Hanson; Daniel A. Torelli; Daniel P. Harrison; Joseph L. Templeton; Thomas J. Meyer
A general electropolymerization/electro-oligomerization strategy is described for preparing spatially controlled, multicomponent films and surface assemblies having both light harvesting chromophores and water oxidation catalysts on metal oxide electrodes for applications in dye-sensitized photoelectrosynthesis cells (DSPECs). The chromophore/catalyst ratio is controlled by the number of reductive electrochemical cycles. Catalytic rate constants for water oxidation by the polymer films are similar to those for the phosphonated molecular catalyst on metal oxide electrodes, indicating that the physical properties of the catalysts are not significantly altered in the polymer films. Controlled potential electrolysis shows sustained water oxidation over multiple hours with no decrease in the catalytic current.
Journal of the American Chemical Society | 2016
Benjamin D. Sherman; Matthew V. Sheridan; Kyung Ryang Wee; Seth L. Marquard; Degao Wang; Leila Alibabaei; Dennis L. Ashford; Thomas J. Meyer
Tandem junction photoelectrochemical water-splitting devices, whereby two light absorbing electrodes targeting separate portions of the solar spectrum generate the voltage required to convert water to oxygen and hydrogen, enable much higher possible efficiencies than single absorber systems. We report here on the development of a tandem system consisting of a dye-sensitized photoelectrochemical cell (DSPEC) wired in series with a dye-sensitized solar cell (DSC). The DSPEC photoanode incorporates a tris(bipyridine)ruthenium(II)-type chromophore and molecular ruthenium based water oxidation catalyst. The DSPEC was tested with two more-red absorbing DSC variations, one utilizing N719 dye with an I3-/I- redox mediator solution and the other D35 dye with a tris(bipyridine)cobalt ([Co(bpy)3]3+/2+) based mediator. The tandem configuration consisting of the DSPEC and D35/[Co(bpy)3]3+/2+ based DSC gave the best overall performance and demonstrated the production of H2 from H2O with the only energy input from simulated solar illumination.
ChemPhysChem | 2012
Wenjing Song; Zuofeng Chen; Christopher R. K. Glasson; Kenneth Hanson; Hanlin Luo; Michael R. Norris; Dennis L. Ashford; Javier J. Concepcion; M. Kyle Brennaman; Thomas J. Meyer
Dye-sensitized photoelectrosynthesis cells (DSPECs) represent a promising approach to solar fuels with solar-energy storage in chemical bonds. The targets are water splitting and carbon dioxide reduction by water to CO, other oxygenates, or hydrocarbons. DSPECs are based on dye-sensitized solar cells (DSSCs) but with photoexcitation driving physically separated solar fuel half reactions. A systematic basis for DSPECs is available based on a modular approach with light absorption/excited-state electron injection, and catalyst activation assembled in integrated structures. Progress has been made on catalysts for water oxidation and CO(2) reduction, dynamics of electron injection, back electron transfer, and photostability under conditions appropriate for water splitting. With added reductive scavengers, as surrogates for water oxidation, DSPECs have been investigated for hydrogen generation based on transient absorption and photocurrent measurements. Detailed insights are emerging which define kinetic and thermodynamic requirements for the individual processes underlying DSPEC performance.
Journal of the American Chemical Society | 2016
David F. Zigler; Zachary A. Morseth; Li Wang; Dennis L. Ashford; M. Kyle Brennaman; Erik M. Grumstrup; Erinn C. Brigham; Melissa K. Gish; Robert J. Dillon; Leila Alibabaei; Gerald J. Meyer; Thomas J. Meyer; John M. Papanikolas
Interfacial electron transfer at titanium dioxide (TiO2) is investigated for a series of surface bound ruthenium-polypyridyl dyes whose metal-to-ligand charge-transfer state (MLCT) energetics are tuned through chemical modification. The 12 complexes are of the form Ru(II)(bpy-A)(L)2(2+), where bpy-A is a bipyridine ligand functionalized with phosphonate groups for surface attachment to TiO2. Functionalization of ancillary bipyridine ligands (L) enables the potential of the excited state Ru(III/)* couple, E(+/)*, in 0.1 M perchloric acid (HClO4(aq)) to be tuned from -0.69 to -1.03 V vs NHE. Each dye is excited by a 200 fs pulse of light in the visible region of the spectrum and probed with a time-delayed supercontiuum pulse (350-800 nm). Decay of the MLCT excited-state absorption at 376 nm is observed without loss of the ground-state bleach, which is a clear signature of electron injection and formation of the oxidized dye. The dye-dependent decays are biphasic with time constants in the 3-30 and 30-500 ps range. The slower injection rate constant for each dye is exponentially distributed relative to E(+/)*. The correlation between the exponentially diminishing density of TiO2 sub-band acceptor levels and injection rate is well described using Marcus-Gerischer theory, with the slower decay components being assigned to injection from the thermally equilibrated state and the faster components corresponding to injection from higher energy states within the (3)MLCT manifold. These results and detailed analyses incorporating molecular photophysics and semiconductor density of states measurements indicate that the multiexponential behavior that is often observed in interfacial injection studies is not due to sample heterogeneity. Rather, this work shows that the kinetic heterogeneity results from competition between excited-state relaxation and injection as the photoexcited dye relaxes through the (3)MLCT manifold to the thermally equilibrated state, underscoring the potential for a simple kinetic model to reproduce the complex kinetic behavior often observed at the interface of mesoporous metal oxide materials.
Chemical Science | 2014
Animesh Nayak; Robin R. Knauf; Kenneth Hanson; Leila Alibabaei; Javier J. Concepcion; Dennis L. Ashford; Jillian L. Dempsey; Thomas J. Meyer
A layer-by-layer procedure has been used to prepare chromophore–catalyst assemblies consisting of phosphonate-derivatized porphyrin chromophores and a phosphonate-derivatized Ru(II) water oxidation catalyst on the surfaces of SnO2 and TiO2 mesoporous, nanoparticle films. In the procedure, initial surface binding of the phosphonate-derivatized porphyrin is followed in sequence by reaction with ZrOCl2 and then with the phosphonate-derivatized water oxidation catalyst [RuII(2,6-bis-(1-methylbenzimidazole-2-yl)pyridine)(2,2′-bipyridine-4,4′-hydroxymethylphosphonate)(H2O)]2+, [RuII(Mebimpy)(4,4′-(PO(OH)2–CH2)2-bpy)(OH2)]2+. Fluorescence from both the free base and Zn(II) porphyrin derivatives on SnO2 is quenched; substantial emission quenching of the Zn(II) porphyrin occurs on TiO2. Transient absorption difference spectra provide direct evidence for appearance of the porphyrin radical cation on SnO2via excited-state electron injection. For the chromophore–catalyst assembly on SnO2, transient absorption difference spectra demonstrate rapid intra-assembly electron transfer oxidation of the catalyst following excitation and injection by the porphyrin chromophore.
Inorganic Chemistry | 2014
Derek M. Ryan; Michael K. Coggins; Javier J. Concepcion; Dennis L. Ashford; Zhen Fang; Leila Alibabaei; Da Ma; Thomas J. Meyer; Marcey L. Waters
Artificial photosynthesis based on dye-sensitized photoelectrosynthesis cells requires the assembly of a chromophore and catalyst in close proximity on the surface of a transparent, high band gap oxide semiconductor for integrated light absorption and catalysis. While there are a number of approaches to assemble mixtures of chromophores and catalysts on a surface for use in artificial photosynthesis based on dye-sensitized photoelectrosynthesis cells, the synthesis of discrete surface-bound chromophore-catalyst conjugates is a challenging task with few examples to date. Herein, a versatile synthetic approach and electrochemical characterization of a series of oligoproline-based light-harvesting chromophore-water-oxidation catalyst assemblies is described. This approach combines solid-phase peptide synthesis for systematic variation of the backbone, copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) as an orthogonal approach to install the chromophore, and assembly of the water-oxidation catalyst in the final step. Importantly, the catalyst was found to be incompatible with the conditions both for amide bond formation and for the CuAAC reaction. The modular nature of the synthesis with late-stage assembly of the catalyst allows for systematic variation in the spatial arrangement of light-harvesting chromophore and water-oxidation catalyst and the role of intrastrand distance on chromophore-catalyst assembly properties. Controlled potential electrolysis experiments verified that the surface-bound assemblies function as water-oxidation electrocatalysts, and electrochemical kinetics data demonstrate that the assemblies exhibit greater than 10-fold rate enhancements compared to the homogeneous catalyst alone.
Journal of Physical Chemistry Letters | 2015
M. Kyle Brennaman; Michael R. Norris; Melissa K. Gish; Erik M. Grumstrup; Leila Alibabaei; Dennis L. Ashford; Alexander M. Lapides; John M. Papanikolas; Joseph L. Templeton; Thomas J. Meyer
Surface-bound, perylenediimide (PDI)-based molecular assemblies have been synthesized on nanocrystalline TiO2 by reaction of a dianhydride with a surface-bound aniline and succinimide bonding. In a second step, the Fe(II) polypyridyl complex [Fe(II)(tpy-PhNH2)2](2+) was added to the outside of the film, also by succinimide bonding. Ultrafast transient absorption measurements in 0.1 M HClO4 reveal that electron injection into TiO2 by (1)PDI* does not occur, but rather leads to the ultrafast formation of the redox-separated pair PDI(•+),PDI(•-), which decays with complex kinetics (τ1 = 0.8 ps, τ2 = 15 ps, and τ3 = 1500 ps). With the added Fe(II) polypyridyl complex, rapid (<25 ps) oxidation of Fe(II) by the PDI(•+),PDI(•-) redox pair occurs to give Fe(III),PDI(•-) persisting for >400 μs in the film environment.
Journal of the American Chemical Society | 2012
Dennis L. Ashford; Wenjing Song; Javier J. Concepcion; Christopher R. K. Glasson; M. Kyle Brennaman; Michael R. Norris; Zhen Fang; Joseph L. Templeton; Thomas J. Meyer