Michael R. Norris

Catalytic Water Oxidation by Single-Site Ruthenium Catalysts

A series of monomeric ruthenium polypyridyl complexes have been synthesized and characterized, and their performance as water oxidation catalysts has been evaluated. The diversity of ligand environments and how they influence rates and reaction thermodynamics create a platform for catalyst design with controllable reactivity based on ligand variations.

Solar water splitting in a molecular photoelectrochemical cell.

Significance Solar water splitting into H2 and O2 with visible light has been achieved by a molecular assembly. The dye sensitized photoelectrosynthesis cell configuration combined with core–shell structures with a thin layer of TiO2 on transparent, nanostructured transparent conducting oxides (TCO), with the outer TiO2 shell formed by atomic layer deposition. In this configuration, excitation and injection occur rapidly and efficiently with the injected electrons collected by the nanostructured TCO on the nanosecond timescale where they are collected by the planar conductive electrode and transmitted to the cathode for H2 production. This allows multiple oxidative equivalents to accumulate at a remote catalyst where water oxidation catalysis occurs. Artificial photosynthesis and the production of solar fuels could be a key element in a future renewable energy economy providing a solution to the energy storage problem in solar energy conversion. We describe a hybrid strategy for solar water splitting based on a dye sensitized photoelectrosynthesis cell. It uses a derivatized, core–shell nanostructured photoanode with the core a high surface area conductive metal oxide film––indium tin oxide or antimony tin oxide––coated with a thin outer shell of TiO2 formed by atomic layer deposition. A “chromophore–catalyst assembly” 1, [(PO3H2)2bpy)2Ru(4-Mebpy-4-bimpy)Rub(tpy)(OH2)]4+, which combines both light absorber and water oxidation catalyst in a single molecule, was attached to the TiO2 shell. Visible photolysis of the resulting core–shell assembly structure with a Pt cathode resulted in water splitting into hydrogen and oxygen with an absorbed photon conversion efficiency of 4.4% at peak photocurrent.

Visible photoelectrochemical water splitting into H2 and O2 in a dye-sensitized photoelectrosynthesis cell.

Significance Mesoporous SnO2/TiO2 core/shell nanostructured electrodes derivatized with a surface-bound Ru(II) polypyridyl-based chromophore–catalyst assembly are used for water splitting into H2 and O2 with visible light in a dye-sensitized photoelectrosynthesis cell. Photocurrents with a small applied bias are among the highest reported. Stabilization of the assembly on the surface of the TiO2 shell by using atomic layer deposition to deposit overlayers of Al2O3 or TiO2 results in long-term water splitting even in a phosphate buffer at pH 7. A hybrid strategy for solar water splitting is exploited here based on a dye-sensitized photoelectrosynthesis cell (DSPEC) with a mesoporous SnO2/TiO2 core/shell nanostructured electrode derivatized with a surface-bound Ru(II) polypyridyl-based chromophore–catalyst assembly. The assembly, [(4,4’-(PO3H2)2bpy)2Ru(4-Mebpy-4’-bimpy)Ru(tpy)(OH2)]4+ ([RuaII-RubII-OH2]4+, combines both a light absorber and a water oxidation catalyst in a single molecule. It was attached to the TiO2 shell by phosphonate-surface oxide binding. The oxide-bound assembly was further stabilized on the surface by atomic layer deposition (ALD) of either Al2O3 or TiO2 overlayers. Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO2/TiO2|-[RuaII-RubII-OH2]4+(Al2O3 or TiO2) photoanodes in photoelectrochemical cells with a Pt cathode and a small applied bias resulted in visible-light water splitting as shown by direct measurements of both evolved H2 and O2. The performance of the resulting DSPECs varies with shell thickness and the nature and extent of the oxide overlayer. Use of the SnO2/TiO2 core/shell compared with nanoITO/TiO2 with the same assembly results in photocurrent enhancements of ∼5. Systematic variations in shell thickness and ALD overlayer lead to photocurrent densities as high as 1.97 mA/cm2 with 445-nm, ∼90-mW/cm2 illumination in a phosphate buffer at pH 7.

Splitting CO2 into CO and O2 by a single catalyst

The metal complex [(tpy)(Mebim-py)RuII(S)]2+ (tpy = 2,2′ : 6′,2′′-terpyridine; Mebim-py = 3-methyl-1-pyridylbenzimidazol-2-ylidene; S = solvent) is a robust, reactive electrocatalyst toward both water oxidation to oxygen and carbon dioxide reduction to carbon monoxide. Here we describe its use as a single electrocatalyst for CO2 splitting, CO2 → CO + 1/2 O2, in a two-compartment electrochemical cell.

Low-overpotential water oxidation by a surface-bound ruthenium-chromophore- ruthenium-catalyst assembly

When anchored to nanoITO (indium tin oxide), the ruthenium chromophore-catalyst assembly shown acts as an electrocatalyst for water oxidation, with O2 evolution occurring at an overpotential of 230 mV in 0.1 M HClO4 . The potential response of the electrode points to 3 e(-) /2 H(+) oxidized [Rua (III) Rub (IV) O](5+) as the active form of the assembly.

Interfacial Dynamics and Solar Fuel Formation in Dye-Sensitized Photoelectrosynthesis Cells

Dye-sensitized photoelectrosynthesis cells (DSPECs) represent a promising approach to solar fuels with solar-energy storage in chemical bonds. The targets are water splitting and carbon dioxide reduction by water to CO, other oxygenates, or hydrocarbons. DSPECs are based on dye-sensitized solar cells (DSSCs) but with photoexcitation driving physically separated solar fuel half reactions. A systematic basis for DSPECs is available based on a modular approach with light absorption/excited-state electron injection, and catalyst activation assembled in integrated structures. Progress has been made on catalysts for water oxidation and CO(2) reduction, dynamics of electron injection, back electron transfer, and photostability under conditions appropriate for water splitting. With added reductive scavengers, as surrogates for water oxidation, DSPECs have been investigated for hydrogen generation based on transient absorption and photocurrent measurements. Detailed insights are emerging which define kinetic and thermodynamic requirements for the individual processes underlying DSPEC performance.

Ultrafast, Light-Induced Electron Transfer in a Perylene Diimide Chromophore-Donor Assembly on TiO2.

Surface-bound, perylenediimide (PDI)-based molecular assemblies have been synthesized on nanocrystalline TiO2 by reaction of a dianhydride with a surface-bound aniline and succinimide bonding. In a second step, the Fe(II) polypyridyl complex [Fe(II)(tpy-PhNH2)2](2+) was added to the outside of the film, also by succinimide bonding. Ultrafast transient absorption measurements in 0.1 M HClO4 reveal that electron injection into TiO2 by (1)PDI* does not occur, but rather leads to the ultrafast formation of the redox-separated pair PDI(•+),PDI(•-), which decays with complex kinetics (τ1 = 0.8 ps, τ2 = 15 ps, and τ3 = 1500 ps). With the added Fe(II) polypyridyl complex, rapid (<25 ps) oxidation of Fe(II) by the PDI(•+),PDI(•-) redox pair occurs to give Fe(III),PDI(•-) persisting for >400 μs in the film environment.

CdSe on a mesoporous transparent conducting oxide scaffold as a photocathode

We report here a photocathode based on a high surface area conductive metal oxide scaffold sensitized by CdSe quantum dots attached via organic linkers. Photoreduction of methylviologen demonstrates efficient photoreactions occuring at electrode surfaces and verifies that the high surface area scaffold is promising for use as a photocathode material.