Dennis van der Vliet

Design and synthesis of bimetallic electrocatalyst with multilayered Pt-skin surfaces.

Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.

Multimetallic Au/FePt3 Nanoparticles as Highly Durable Electrocatalyst

We report the design and synthesis of multimetallic Au/Pt-bimetallic nanoparticles as a highly durable electrocatalyst for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. This system was first studied on well-defined Pt and FePt thin films deposited on a Au(111) surface, which has guided the development of novel synthetic routes toward shape-controlled Au nanoparticles coated with a Pt-bimetallic alloy. It has been demonstrated that these multimetallic Au/FePt(3) nanoparticles possess both the high catalytic activity of Pt-bimetallic alloys and the superior durability of the tailored morphology and composition profile, with mass-activity enhancement of more than 1 order of magnitude over Pt catalysts. The reported synergy between well-defined surfaces and nanoparticle synthesis offers a persuasive approach toward advanced functional nanomaterials.

Improving the hydrogen oxidation reaction rate by promotion of hydroxyl adsorption.

The development of hydrogen-based energy sources as viable alternatives to fossil-fuel technologies has revolutionized clean energy production using fuel cells. However, to date, the slow rate of the hydrogen oxidation reaction (HOR) in alkaline environments has hindered advances in alkaline fuel cell systems. Here, we address this by studying the trends in the activity of the HOR in alkaline environments. We demonstrate that it can be enhanced more than fivefold compared to state-of-the-art platinum catalysts. The maximum activity is found for materials (Ir and Pt₀.₁Ru₀.₉) with an optimal balance between the active sites that are required for the adsorption/dissociation of H₂ and for the adsorption of hydroxyl species (OHad). We propose that the more oxophilic sites on Ir (defects) and PtRu material (Ru atoms) electrodes facilitate the adsorption of OHad species. Those then react with the hydrogen intermediates (Had) that are adsorbed on more noble surface sites.

Unique electrochemical adsorption properties of Pt-skin surfaces.

PtM alloys (M = Co, Ni, Fe, etc.) have been extensively studied for their use in fuel cells, both in well-defined extended surfaces, as well as in nanoparticles. After the report about exceptional activity of Pt3Ni(111)-skin surface [1a] for the oxygen reduction reaction (ORR) a lot of efforts have been made to mimic this catalytic behavior at the nanoscale. It has been shown that a Pt3Ni(111) crystal annealed in ultrahigh vacuum (UHV) shows an oscillating segregation profile, with the outermost layer consisting of pure platinum while the second layer is enriched in nickel compared to the bulk composition. Such a surface we termed Pt skin, and owing to the presence of the non-noble metal in the subsurface layer it has altered electronic properties compared to the monometallic Pt single crystal with the same orientation. Accordingly, altered electronic properties induce a change in adsorption behavior, specifically a shift of surface-oxide formation to higher potentials. This adsorption behavior is believed to be the origin of the high activity for the ORR. On the opposite side of the potential scale, the adsorption of hydrogenated species, denoted as underpotentially adsorbed hydrogen (Hupd), is also largely affected on Pt-skin surfaces. [4] Despite numerous efforts dedicated to synthesize nanocatalysts with Pt-skin-type surfaces, it still remains a challenge to claim their existence at the nanoscale. To systematically resolve this issue, we attempt to provide fundamental insight into the adsorption properties of well-defined Pt-skin surfaces under relevant electrochemical conditions and to transfer that knowledge to corresponding nanocatalysts. For that reason, we first examine the formation and composition of Pt-skin surfaces by low-energy ion scattering (LEIS) and scanning tunneling microscopy (STM) in UHV, and second we study the composition of the surfaces in an electrochemical environment to establish their adsorption properties. We demonstrate by cyclic voltammetry that the surface coverage of Hupd on Pt skin is about half of that found on Pt(111), whereas the surface coverage of a saturated monolayer of carbon monoxide is similar for both surfaces. This is an important finding, which provides a link towards accurate determination of the electrochemically active surface area of nanoscale catalysts. The developed methodology provides additional evidence for the existence of Pt-skin surfaces on Pt-bimetallic nanocatalysts and can substantially diminish errors in the evaluation of the real surface area and catalytic activity. A thorough examination of the Pt-skin surfaces was performed in view of their importance in electrocatalysis as well as in response to recent questions and doubts in the

Unique Activity of Platinum Adislands in the CO Electrooxidation Reaction

The development of electrocatalytic materials of enhanced activity and efficiency through careful manipulation, at the atomic scale, of the catalyst surface structure has long been a goal of electrochemists. To accomplish this ambitious objective, it would be necessary both to obtain a thorough understanding of the relationship between the atomic-level surface structure and the catalytic properties and to develop techniques to synthesize and stabilize desired active sites. In this contribution, we present a combined experimental and theoretical study in which we demonstrate how this approach can be used to develop novel, platinum-based electrocatalysts for the CO electrooxidation reaction in CO(g)-saturated solution; the catalysts show activities superior to any pure-metal catalysts previously known. We use a broad spectrum of electrochemical surface science techniques to synthesize and rigorously characterize the catalysts, which are composed of adisland-covered platinum surfaces, and we show that highly undercoordinated atoms on the adislands themselves are responsible for the remarkable activity of these materials.

Monodisperse Pt3Co nanoparticles as electrocatalyst: the effects of particle size and pretreatment on electrocatalytic reduction of oxygen

Monodisperse Pt(3)Co nanoparticles have been synthesized with size control via an organic solvothermal approach. The obtained nanoparticles were incorporated into a carbon matrix and applied as electrocatalysts for the oxygen reduction reaction to investigate the effects of particle size and pretreatment on their catalytic performance. It has been found that the optimal conditions for maximum mass activity were with particles of approximately 4.5 nm and a mild annealing temperature of about 500 degrees C. While the particle size effect can be correlated to the average surface coordination number, Monte Carlo simulations have been introduced to depict the nanoparticle structure and segregation profile, which revealed that the annealing temperature has a direct influence on the particle surface relaxation, segregation and adsorption/catalytic properties. The obtained fundamental understanding of activity enhancement in Pt-bimetallic alloy catalysts could be utilized to guide the development of advanced nanomaterials for catalytic applications.

Functional links between Pt single crystal morphology and nanoparticles with different size and shape: the oxygen reduction reaction case

Design of active and stable Pt-based nanoscale electrocatalysts for the oxygen reduction reaction (ORR) will be the key to improving the efficiency of fuel cells that are needed to deliver reliable, affordable and environmentally friendly energy. Here, by exploring the ORR on Pt single crystals, cubo-octahedral (polyhedral) Pt NPs with different sizes (ranging from 2 to 7 nm), and 7–8 nm Pt NPs with different shapes (cubo-octahedral vs. cube vs. octahedral), we presented a surface science approach capable of rationalizing, and ultimately understanding, fundamental relationships between stability of Pt NPs and activity of the ORR in acidic media. By exploring the potential induced dissolution/re-deposition of Pt between 0.05 and 1.3 V, we found that concomitant variations in morphology of Pt(111) and Pt(100) lead to narrowing differences in activity between Pt single crystal surfaces. We also found that regardless of an initial size or shape, NPs are metastable and easily evolve to thermodynamically equilibrated shape and size with very similar activity for the ORR. We concluded that while initially clearly observed, the particle size and shape effects diminish as the particles age to the point that it may appear that the ORR depends neither on the particle size nor particle shape.

Rational Development of Ternary Alloy Electrocatalysts

Improving the efficiency of electrocatalytic reduction of oxygen represents one of the main challenges for the development of renewable energy technologies. Here, we report the systematic evaluation of Pt-ternary alloys (Pt3(MN)1 with M, N = Fe, Co, or Ni) as electrocatalysts for the oxygen reduction reaction (ORR). We first studied the ternary systems on extended surfaces of polycrystalline thin films to establish the trend of electrocatalytic activities and then applied this knowledge to synthesize ternary alloy nanocatalysts by a solvothermal approach. This study demonstrates that the ternary alloy catalysts can be compelling systems for further advancement of ORR electrocatalysis, reaching higher catalytic activities than bimetallic Pt alloys and improvement factors of up to 4 versus monometallic Pt.

Final Report - Durable Catalysts for Fuel Cell Protection during Transient Conditions

The objective of this project was to develop catalysts that will enable proton exchange membranes (PEM) fuel cell systems to weather the damaging conditions in the fuel cell at voltages beyond the thermodynamic stability of water during the transient periods of start-up/shut-down and fuel starvation. Such catalysts are required to make it possible for the fuel cell to satisfy the 2015 DOE targets for performance and durability. The project addressed a key issue of importance for successful transition of PEM fuel cell technology from development to pre-commercial phase. This issue is the failure of the catalyst and the other thermodynamically unstable membrane electrode assembly (MEA) components during start-up/shut-down and local fuel starvation at the anode, commonly referred to as transient conditions. During these periods the electrodes can reach potentials higher than the usual 1.23V upper limit during normal operation. The most logical way to minimize the damage from such transient events is to minimize the potential seen by the electrodes. At lower positive potentials, increased stability of the catalysts themselves and reduced degradation of the other MEA components is expected.