Din Ping Tsai

High-Efficiency Broadband Anomalous Reflection by Gradient Meta-Surfaces

We combine theory and experiment to demonstrate that a carefully designed gradient meta-surface supports high-efficiency anomalous reflections for near-infrared light following the generalized Snells law, and the reflected wave becomes a bounded surface wave as the incident angle exceeds a critical value. Compared to previously fabricated gradient meta-surfaces in infrared regime, our samples work in a shorter wavelength regime with a broad bandwidth (750-900 nm), exhibit a much higher conversion efficiency (∼80%) to the anomalous reflection mode at normal incidence, and keep light polarization unchanged after the anomalous reflection. Finite-difference-time-domain (FDTD) simulations are in excellent agreement with experiments. Our findings may lead to many interesting applications, such as antireflection coating, polarization and spectral beam splitters, high-efficiency light absorbers, and surface plasmon couplers.

Directed subwavelength imaging using a layered metal-dielectric system

We examine some of the optical properties of a metamaterial consisting of thin layers of alternating metal and dielectric. We can model this material as a homogeneous effective medium with anisotropic dielectric permittivity. When the components of this permittivity have different signs, the behavior of the system becomes very interesting: the normally evanescent parts of a P-polarized incident field are now transmitted, and there is a preferred direction of propagation. We show that a slab of this material can form an image with sub-wavelength details, at a position which depends on the frequency of light used. The quality of the image is affected by absorption and by the finite width of the layers; we go beyond the effective medium approximation to predict how thin the layers need to be in order to obtain subwavelength resolution.

High-Efficiency Broadband Meta-Hologram with Polarization- Controlled Dual Images

Holograms, the optical devices to reconstruct predesigned images, show many applications in our daily life. However, applications of hologram are still limited by the constituent materials and therefore their working range is trapped at a particular electromagnetic region. In recent years, the metasurfaces, an array of subwavelength antenna with varying sizes, show the abilities to manipulate the phase of incident electromagnetic wave from visible to microwave frequencies. Here, we present a reflective-type and high-efficiency meta-hologram fabricated by metasurface for visible wavelength. Using gold cross nanoantennas as building blocks to construct our meta-hologram devices with thickness ∼ λ/4, the reconstructed images of meta-hologram show polarization-controlled dual images with high contrast, functioning for both coherent and incoherent light sources within a broad spectral range and under a wide range of incidence angles. The flexibility demonstrated here for our meta-hologram paves the road to a wide range of applications related to holographic images at arbitrary electromagnetic wave region.

Micromachined tunable metamaterials: a review

This paper reviews micromachined tunable metamaterials, whereby the tuning capabilities are based on the mechanical reconfiguration of the lattice and/or the metamaterial element geometry. The primary focus of this review is the feasibility of the realization of micromachined tunable metamaterials via structure reconfiguration and the current state of the art in the fabrication technologies of structurally reconfigurable metamaterial elements. The micromachined reconfigurable microstructures not only offer a new tuning method for metamaterials without being limited by the nonlinearity of constituent materials, but also enable a new paradigm of reconfigurable metamaterial-based devices with mechanical actuations. With recent development in nanomachining technology, it is possible to develop structurally reconfigurable metamaterials with faster tuning speed, higher density of integration and more flexible choice of the working frequencies.

Toroidal Dipolar Response in a Metamaterial

Making a Point with Metamaterials A long-predicted electromagnetic excitation, the toroidal moment (or anapole), is associated with toroidal shape and current flow within a structure and has been implicated in nuclear and particle physics. This distinct family of electromagnetic excitations has not been observed directly because they are masked by much stronger electric and magnetic multipoles. Kaelberer et al. (p. 1510, published online 4 November) have developed a metamaterial structure based on stacked loops of inverted split-ring resonators (“metamolecules”) whose response under excitation is consistent with the existence of a toroidal moment. The metamaterial is designed so that both the electric and magnetic dipole moments induced by an incident electromagnetic wave are suppressed, while the toroidal response is isolated and resonantly enhanced to a detectable level. A material that embeds metal wire loops in a dielectric has properties consistent with an exotic electromagnetic excitation. Toroidal multipoles are fundamental electromagnetic excitations different from those associated with the familiar charge and magnetic multipoles. They have been held responsible for parity violation in nuclear and particle physics, but direct evidence of their existence in classical electrodynamics has remained elusive. We report on the observation of a resonant electromagnetic response in an artificially engineered medium, or metamaterial, that cannot be attributed to magnetic or charge multipoles and can only be explained by the existence of a toroidal dipole. Our direct experimental evidence of the toroidal response brings attention to the often ignored electromagnetic interactions involving toroidal multipoles, which could be present in naturally occurring systems, especially at the macromolecule level, where toroidal symmetry is ubiquitous.

Plasmon inducing effects for enhanced photoelectrochemical water splitting: X-ray absorption approach to electronic structures.

Artificial photosynthesis using semiconductors has been investigated for more than three decades for the purpose of transferring solar energy into chemical fuels. Numerous studies have revealed that the introduction of plasmonic materials into photochemical reaction can substantially enhance the photo response to the solar splitting of water. Until recently, few systematic studies have provided clear evidence concerning how plasmon excitation and which factor dominates the solar splitting of water in photovoltaic devices. This work demonstrates the effects of plasmons upon an Au nanostructure-ZnO nanorods array as a photoanode. Several strategies have been successfully adopted to reveal the mutually independent contributions of various plasmonic effects under solar irradiation. These have clarified that the coupling of hot electrons that are formed by plasmons and the electromagnetic field can effectively increase the probability of a photochemical reaction in the splitting of water. These findings support a new approach to investigating localized plasmon-induced effects and charge separation in photoelectrochemical processes, and solar water splitting was used herein as platform to explore mechanisms of enhancement of surface plasmon resonance.

Metamaterial with polarization and direction insensitive resonant transmission response mimicking electromagnetically induced transparency

We report on a planar metamaterial, the resonant transmission frequency of which does not depend on the polarization and angle of incidence of electromagnetic waves. The resonance results from the excitation of high-Q antisymmetric trapped current mode and shows sharp phase dispersion characteristic to Fano-type resonances of the electromagnetically induced transparency phenomenon.

Aluminum Plasmonic Multicolor Meta-Hologram

We report a phase-modulated multicolor meta-hologram (MCMH) that is polarization-dependent and capable of producing images in three primary colors. The MCMH structure is made of aluminum nanorods that are arranged in a two-dimensional array of pixels with surface plasmon resonances in red, green, and blue. The aluminum nanorod array is patterned on a 30 nm thick SiO2 spacer layer sputtered on top of a 130 nm thick aluminum mirror. With proper design of the structure, we obtain resonances of narrow bandwidths to allow for implementation of the multicolor scheme. Taking into account of the wavelength dependence of the diffraction angle, we can project images to specific locations with predetermined size and order. With tuning of aluminum nanorod size, we demonstrate that the image color can be continuously varied across the visible spectrum.

Towards the lasing spaser: controlling metamaterial optical response with semiconductor quantum dots

We report the first experimental demonstration of compensating Joule losses in metallic photonic metamaterial using optically pumped PbS semiconductor quantum dots.

Microelectromechanical Maltese-cross metamaterial with tunable terahertz anisotropy.

Dichroic polarizers and waveplates exploiting anisotropic materials have vast applications in displays and numerous optical components, such as filters, beamsplitters and isolators. Artificial anisotropic media were recently suggested for the realization of negative refraction, cloaking, hyperlenses, and controlling luminescence. However, extending these applications into the terahertz domain is hampered by a lack of natural anisotropic media, while artificial metamaterials offer a strong engineered anisotropic response. Here we demonstrate a terahertz metamaterial with anisotropy tunable from positive to negative values. It is based on the Maltese-cross pattern, where anisotropy is induced by breaking the four-fold symmetry of the cross by displacing one of its beams. The symmetry breaking permits the excitation of a Fano mode active for one of the polarization eigenstates controlled by actuators using microelectromechanical systems. The metamaterial offers new opportunities for the development of terahertz variable waveplates, tunable filters and polarimetry.