Dmitry A. Grishanov

GeO2 Thin Film Deposition on Graphene Oxide by the Hydrogen Peroxide Route: Evaluation for Lithium-Ion Battery Anode

A peroxogermanate thin film was deposited in high yield at room temperature on graphene oxide (GO) from peroxogermanate sols. The deposition of the peroxo-precursor onto GO and the transformations to amorphous GeO2, crystalline tetragonal GeO2, and then to cubic elemental germanium were followed by electron microscopy, XRD, and XPS. All of these transformations are influenced by the GO support. The initial deposition is explained in view of the sol composition and the presence of GO, and the different thermal transformations are explained by reactions with the graphene support acting as a reducing agent. As a test case, the evaluation of the different materials as lithium ion battery anodes was carried out revealing that the best performance is obtained by amorphous germanium oxide@GO with >1000 mAh g-1 at 250 mA g-1 (between 0 and 2.5 V vs Li/Li+ cathode), despite the fact that the material contained only 51 wt % germanium. This is the first demonstration of the peroxide route to produce peroxogermanate thin films and thereby supported germanium and germanium oxide coatings. The advantages of the process over alternative methodologies are discussed.

Layer-by-layer assembly of porphyrin-based metal–organic frameworks on solids decorated with graphene oxide

Fabrication of metal–organic frameworks (MOFs) as films on surfaces is a challenging and actively developed field in the context of potential applications of surface-integrated MOFs (SURMOFs) in sensing, catalysis and molecular electronics. Herein, we report a method for the preparation of composites of graphene oxide (GO) and zinc tetracarboxyphenyl porphyrin SURMOFs, which are potentially useful as synergetic catalysts on planar solid supports. The SURMOF films were assembled via layer-by-layer coordination of zinc porphyrins with ZnAc2 clusters on the ultrathin surface coatings of GO. We found that non-covalent adsorption of zinc acetate on the GO films is essential for anchoring porphyrin molecules in the growth-initiating template layer. UV-vis spectroscopy provided evidence for a stepwise assembly of the deposited SURMOF films. By using a combination of X-ray diffraction, scanning electron microscopy and atomic force microscopy methods, we show that the resulting GO-associated SURMOFs exhibit a leaflet-like planar morphology with out-of-plane periodicity. Because of the influence of the well-defined surface geometry, the molecular organization in thin SURMOFs is different from that of synthetic bulk materials with a similar composition. The results of BET method measurements suggest that the fabricated SURMOF films have exceptionally large surface areas and adsorption capacities. Our results provide a basis for new types of composite SURMOF structures using GO surface coatings as growth-guiding scaffolds for metal–organic coordination networks integrated with various solid supports.

Peroxide Coordination of Tellurium in Aqueous Solutions

Tellurium-peroxo complexes in aqueous solutions have never been reported. In this work, ammonium peroxotellurates (NH4 )4 Te2 (μ-OO)2 (μ-O)O4 (OH)2 (1) and (NH4 )5 Te2 (μ-OO)2 (μ-O)O5 (OH)⋅1.28 H2 O⋅0.72 H2 O2 (2) were isolated from 5 % hydrogen peroxide aqueous solutions of ammonium tellurate and characterized by single-crystal and powder X-ray diffraction analysis, by Raman spectroscopy and thermal analysis. The crystal structure of 1 comprises ammonium cations and a symmetric binuclear peroxotellurate anion [Te2 (μ-OO)2 (μ-O)O4 (OH)2 ](4-) . The structure of 2 consists of an unsymmetrical [Te2 (μ-OO)2 (μ-O)O5 (OH)](5-) anion, ammonium cations, hydrogen peroxide, and water. Peroxotellurate anions in both 1 and 2 contain a binuclear Te2 (μ-OO)2 (μ-O) fragment with one μ-oxo- and two μ-peroxo bridging groups. (125) Te NMR spectroscopic analysis shows that the peroxo bridged bitellurate anions are the dominant species in solution, with 3-40 %wt H2 O2 and for pH values above 9. DFT calculations of the peroxotellurate anion confirm its higher thermodynamic stability compared with those of the oxotellurate analogues. This is the first direct evidence for tellurium-peroxide coordination in any aqueous system and the first report of inorganic tellurium-peroxo complexes. General features common to all reported p-block element peroxides could be discerned by the characterization of aqueous and crystalline peroxotellurates.

Vanadium Oxide Thin Film Formation on Graphene Oxide by Microexplosive Decomposition of Ammonium Peroxovanadate and Its Application as a Sodium Ion Battery Anode

Formation of vanadium oxide nanofilm-coated graphene oxide (GO) is achieved by thermally induced explosive disintegration of a microcrystalline ammonium peroxovanadate-GO composite. GO sheets isolate the microcrystalline grains and capture and contain the microexplosion products, resulting in the deposition of the nanoscale products on the GO. Thermal treatment of the supported nanofilm yields a sequence of nanocrystalline phases of vanadium oxide (V3O7, VO2) as a function of temperature. This is the first demonstration of microexplosive disintegration of a crystalline peroxo compound to yield a nanocoating. The large number of recently reported peroxide-rich crystalline materials suggests that the process can be a useful general route for nanofilm formation. The V3O7@GO composite product was tested as a sodium ion battery anode and showed high charge capacity at high rate charge-discharge cycling (150 mAh g-1 at 3000 mA g-1 vs 300 mAh g-1 at 100 mA g-1) due to the nanomorphology of the vanadium oxide.

Synthesis of high volumetric capacity graphene oxide-supported tellurantimony Na- and Li-ion battery anodes by hydrogen peroxide sol gel processing

High-charge-capacity sodium-ion battery anodes made of Sb2Te3@reduced graphene oxide are reported for the first time. Uniform nano-coating of graphene oxide is carried out from common sol of peroxotellurate and peroxoantimonate under room temperature processing. Reduction by hydrazine under glycerol reflux yields Sb2Te3@reduced graphene oxide. The electrodes exhibit exceptionally high volumetric charge capacity, above 2300mAhcm-3 at 100mAg-1 current density, showing very good rate capabilities and retaining 60% of this capacity even at 2000mAg-1. A comparison of sodiation and lithiation shows that lithiation exhibits better volumetric charge capacity, but surprisingly only marginally better relative rate capability retention at 2000mAg-1. Tellurium-based electrodes are attractive due to the high volumetric charge capacity of Te, its very high electric conductivity, and the low relative expansion upon lithiation/sodiation.

One-pot synthesis of 4-alkyl-2-amino-4H-chromene derivatives

Abstract A one-pot synthesis of 4-alkyl-2-amino-4H-chromene derivatives by base-initiated reactions of aliphatic aldehydes, malononitrile, and resorcinol in water is described.

Crystal structures of non-proteinogenic amino acid peroxosolvates: rare example of H-bonded hydrogen peroxide chains

Novel peroxosolvates of the non-proteinogenic amino acids sarcosine C3H7NO2·H2O2 (1) and phenylserine C9H11NO3·H2O2 (2) were prepared and their structures were determined by X-ray crystallography. All «active» hydrogen atoms (amino, hydroxo, and peroxo) in these adducts are involved in hydrogen bonding. All H2O2 molecules form two donor hydrogen bonds HOOH⋯−O2C–. In contrast to the widely studied structures of natural amino acid peroxosolvates, in structure 2 charge-assisted NH+⋯O2H2 hydrogen bonds were not found. Crystal 2 represents a rare example of peroxide molecules combined in infinite H-bonded chains.