Donald H. Atha

Copper Oxide Nanoparticle Mediated DNA Damage in Terrestrial Plant Models

Engineered nanoparticles, due to their unique electrical, mechanical, and catalytic properties, are presently found in many commercial products and will be intentionally or inadvertently released at increasing concentrations into the natural environment. Metal- and metal oxide-based nanomaterials have been shown to act as mediators of DNA damage in mammalian cells, organisms, and even in bacteria, but the molecular mechanisms through which this occurs are poorly understood. For the first time, we report that copper oxide nanoparticles induce DNA damage in agricultural and grassland plants. Significant accumulation of oxidatively modified, mutagenic DNA lesions (7,8-dihydro-8-oxoguanine; 2,6-diamino-4-hydroxy-5-formamidopyrimidine; 4,6-diamino-5-formamidopyrimidine) and strong plant growth inhibition were observed for radish (Raphanus sativus), perennial ryegrass (Lolium perenne), and annual ryegrass (Lolium rigidum) under controlled laboratory conditions. Lesion accumulation levels mediated by copper ions and macroscale copper particles were measured in tandem to clarify the mechanisms of DNA damage. To our knowledge, this is the first evidence of multiple DNA lesion formation and accumulation in plants. These findings provide impetus for future investigations on nanoparticle-mediated DNA damage and repair mechanisms in plants.

Standardization of PCR Amplification for Fragile X Trinucleotide Repeat Measurements

To provide the clinical diagnostics community with accurate protocols and measurements for the detection of genetic disorders, we have established a quantitative measurement program for trinucleotide repeats associated with human disease. In this study, we have focused on the triplet repeat associated with fragile X syndrome. Five cell lines obtained from the Coriell Cell Repository were analyzed after polymerase chain reaction (PCR) amplification and size separation. These cell lines were reported to contain CGG repeat elements (ranging from 29 to 110 repeats). Our initial measurements focused on measurement variability: (a) between slab‐PAGE and capillary (CE) separation systems (b) interlane variability (slab‐PAGE) (c) intergel variability, and (d) variability associated with amplification. Samples were run in triplicate for all measurements, and the analysis performed using GeneScan™ analysis software. The repeat sizes were verified by DNA sequence analyzes. The standard deviations for interlane measurements in slab‐gels ranged from 0.05 to 0.35. There was also little variation in size measurements performed on different gels and among PCR amplifications. The CGG repeat measurements performed by capillary electrophoresis were more precise, with standard deviations ranging from 0.02 to 0.29. The slab‐PAGE and CE size measurements were in agreement except for the pre‐mutation alleles, which yielded significantly smaller sizes by CE.

Manganese-induced oxidative DNA damage in neuronal SH-SY5Y cells: Attenuation of thymine base lesions by glutathione and N-acetylcysteine

Manganese (Mn) is an essential trace element required for normal function and development. However, exposure to this metal at elevated levels may cause manganism, a progressive neurodegenerative disorder with neurological symptoms similar to idiopathic Parkinsons disease (IPD). Elevated body burdens of Mn from exposure to parental nutrition, vapors in mines and smelters and welding fumes have been associated with neurological health concerns. The underlying mechanism of Mn neurotoxicity remains unclear. Accordingly, the present study was designed to investigate the toxic effects of Mn(2+) in human neuroblastoma SH-SY5Y cells. Mn(2+) caused a concentration dependent decrease in SH-SY5Y cellular viability compared to controls. The LD50 value was 12.98 μM Mn(2+) (p<0.001 for control vs. 24h Mn treatment). Both TUNEL and annexin V/propidium iodide (PI) apoptosis assays confirmed the induction of apoptosis in the cells following exposure to Mn(2+) (2 μM, 62 μM or 125 μM). In addition, Mn(2+) induced both the formation and accumulation of DNA single strand breaks (via alkaline comet assay analysis) and oxidatively modified thymine bases (via gas chromatography/mass spectrometry analysis). Pre-incubation of the cells with characteristic antioxidants, either 1mM N-acetylcysteine (NAC) or 1mM glutathione (GSH) reduced the level of DNA strand breaks and the formation of thymine base lesions, suggesting protection against oxidative cellular damage. Our findings indicate that (1) exposure of SH-SY5Y cells to Mn promotes both the formation and accumulation of oxidative DNA damage, (2) SH-SY5Y cells with accumulated DNA damage are more likely to die via an apoptotic pathway and (3) the accumulated levels of DNA damage can be abrogated by the addition of exogenous chemical antioxidants. This is the first known report of Mn(2+)-induction and antioxidant protection of thymine lesions in this SH-SY5Y cell line and contributes new information to the potential use of antioxidants as a therapeutic strategy for protection against Mn(2+)-induced oxidative DNA damage.

NIST gold nanoparticle reference materials do not induce oxidative DNA damage

Abstract One primary challenge in nanotoxicology studies is the lack of well-characterised nanoparticle reference materials which could be used as positive or negative nanoparticle controls. The National Institute of Standards and Technology (NIST) has developed three gold nanoparticle (AuNP) reference materials (10, 30 and 60 nm). The genotoxicity of these nanoparticles was tested using HepG2 cells and calf-thymus DNA. DNA damage was assessed based on the specific and sensitive measurement of four oxidatively-modified DNA lesions (8-hydroxy-2´-deoxyguanosine, 8-hydroxy-2´-deoxyadenosine, (5´S)-8,5´-cyclo-2´-deoxyadenosine and (5´R)-8,5´-cyclo-2´-deoxyadenosine) using liquid chromatography/tandem mass spectrometry. Significantly elevated, dose-dependent DNA damage was not detected at concentrations up to 0.2 μg/ml, and free radicals were not detected using electron paramagnetic resonance spectroscopy. These data suggest that the NIST AuNPs could potentially serve as suitable negative-control nanoparticle reference materials for in vitro and in vivo genotoxicity studies. NIST AuNPs thus hold substantial promise for improving the reproducibility and reliability of nanoparticle genotoxicity studies.

Identification of Known P53 Point Mutations by Capillary Electrophoresis Using Unique Mobility Profiles in a Blinded Study

This study is part of an ongoing project at the National Institute of Standards and Technology (NIST) that generates a panel of DNA clones containing the most common mutations found in the human p53 tumor suppressor gene. This panel will be made available as a reference source for evaluation and testing for p53 mutations. Single strand conformation polymorphism (SSCP) analysis has found widespread acceptance as a tool for simply and rapidly screening for mutations, albeit with a detection rate that can be below 100%. We have begun to analyze mutations found in exon 7 of the p53 gene by SSCP using laser induced fluorescence capillary electrophoresis (LIF-CE). PCR fragments, containing single point mutations, were amplified from genomic DNA isolated from cell lines using primers labeled with two different fluorophores. This dual labeling approach allowed better traceability of mobility shifts as a function of the experimental conditions. While analyzing the clones H596, Colo320, Namalwa and wild type (reference samples) at different temperatures, ranging from 25 to 45 degrees C, it was observed that each mutation responded in a unique way to changes in temperature both in magnitude and direction of shifts relative to the wild type sample. In a blinded study, ten p53 exon 7 samples were matched automatically, using ABI PRISM Genotyper software, against the four reference samples. From these 10 samples, six were correctly identified as containing one of the reference mutations, two corresponded to wild type, and two were correctly identified as non-reference mutations. This approach should prove helpful in the rapid screening of target sequences that are known to bear a limited number of mutations.

Functionalization-Dependent Induction of Cellular Survival Pathways by CdSe Quantum Dots in Primary Normal Human Bronchial Epithelial Cells

Quantum dots (QDs) are semiconductor nanocrystals exhibiting unique optical properties that can be exploited for many practical applications ranging from photovoltaics to biomedical imaging and drug delivery. A significant number of studies have alluded to the cytotoxic potential of these materials, implicating Cd-leaching as the causal factor. Here, we investigated the role of heavy metals in biological responses and the potential of CdSe-induced genotoxicity. Our results indicate that, while negatively charged QDs are relatively noncytotoxic compared to positively charged QDs, the same does not hold true for their genotoxic potential. Keeping QD core composition and size constant, 3 nm CdSe QD cores were functionalized with mercaptopropionic acid (MPA) or cysteamine (CYST), resulting in negatively or positively charged surfaces, respectively. CYST-QDs were found to induce significant cytotoxicity accompanied by DNA strand breakage. However, MPA-QDs, even in the absence of cytotoxicity and reactive oxygen species formation, also induced a high number of DNA strand breaks. QD-induced DNA damage was confirmed by identifying the presence of p53 binding protein 1 (53BP1) in the nuclei of exposed cells and subsequent diminishment of p53 from cytoplasmic cellular extracts. Further, high-throughput real-time PCR analyses revealed upregulation of DNA damage and response genes and several proinflammatory cytokine genes. Most importantly, transcriptome sequencing revealed upregulation of the metallothionein family of genes in cells exposed to MPA-QDs but not CYST-QDs. These data indicate that cytotoxic assays must be supplemented with genotoxic analyses to better understand cellular responses and the full impact of nanoparticle exposure when making recommendations with regard to risk assessment.

Detection of p53 gene mutation: Analysis by single‐strand conformation polymorphism and Cleavase fragment length polymorphism

We have generated a collection of clones containing single point mutations within the exon 5—9 hot spot regions of the p53 gene by using polymerase chain reaction (PCR) to amplify select regions of the gene from characterized cell lines. These clones were then used to address the sensitivity of mutation detection using slab‐gel single‐strand conformation polymorphism (SSCP) and Cleavase fragment length polymorphism (CFLP) assay systems. Both methods exhibited high sensitivities for the detection of mutations in cloned p53 mutations in this study: 97% for CFLP and 94% for SSCP. In addition to resulting in higher sensitivity of mutation detection, CFLP has the capability to analyze longer fragments. In this study, CFLP identified five intronic mutations which were not investigated in the exon‐specific SSCP assay. These results agree with those found elsewhere and demonstrate that CFLP scanning can have practical advantages when used for the identification of sequence alterations within the p53 gene.

Analytical Validation of Telomerase Activity for Cancer Early Detection: TRAP/PCR-CE and hTERT mRNA Quantification Assay for High-Throughput Screening of Tumor Cells

Activation of telomerase plays a critical role in unlimited proliferation and immortalization of cells. Telomerase activity has been shown to correlate with tumor progression, indicating that tumors expressing this enzyme possess aggressive clinical behavior and that telomerase activity may be a useful biomarker for early detection of cancer. However, measurements of telomerase activity by current methods such as telomeric repeat amplification protocol (TRAP)/polymerase chain reaction (PCR) or antibody-based radioimmunoassay (RIA) are low-throughput and not robust enough to easily accommodate the required statistical analysis to determine whether telomerase activity is a practical biomarker. As part of the National Cancer Institute Early Detection Research Network of analytical validation, we have developed a robot assisted TRAP assay (RApidTRAP) of telomerase, a potential biomarker for cancer early detection. Measurements of human telomerase reverse transcriptase catalytic subunit (hTERT) mRNA were performed in concert with measurement of telomerase activity. For this purpose we determined hTERT mRNA concentration and telomerase activity in human normal (RPE-28) and cancer (A549) cell lines as well as in human serum (SRM 1951A). Telomerase activity measurements were made using the TRAP/PCR capillary electrophoresis (CE) method on (50 to 1000) cells/reaction isolated from cell extracts. Measurement of hTERT mRNA was made using specific primers and probes on a LightCycler in the range of (10 to 7000) cells/reaction. Comparison of high-throughput telomerase activity measurements using the robot and those performed manually were consistent in sensitivity and reproducibility. Using this combination of telomerase activity and hTERT mRNA measurements, the automated system improved efficiency over traditional TRAP/PCR methods.

Analysis of laser-induced plasmid DNA photolysis by capillary electrophoresis

Capillary electrophoresis (CE) was used to monitor the laser-induced conversion of supercoiled pKOL8UV5 plasmid DNA into nicked conformers. The plasmid samples (0.1 mg/ml) were incubated in the absence or presence of 110 mumol/l ethidium bromide (EB) and then exposed to 100 J of argon laser radiation (488 nm). The nicked, open circular conformers were separated from the supercoiled DNA by a 15% increase in retention time. Approximately 90% of the control DNA was in the supercoiled form. Laser radiation in the presence of EB caused complete conversion of the supercoiled plasmid DNA into nicked conformers. Laser-induced fluorescence CE (LIF-CE) was about 100-fold more sensitive than UV-CE in the detection of these conformers. Agarose gel electrophoresis confirmed these findings and showed the presence of the nicked plasmid conformers. Based on these comparisons, CE is an efficient analytical tool for the identification of laser-induced conformational changes in plasmid DNA.

Renewable Standard Reference Material for the Detection of TP53 Mutations

AbstractBackground: Numerous DNA-based tests are currently in use or under development for the detection of mutations associated with disease. Most of the current methods use PCR amplification technologies and detection after separation or chromatography of the products. We have developed a panel of standard reference materials consisting of 12 plasmid clones containing a 2.0kb region of the TP53 gene, including exons 5–9. Eleven of these clones contain a single mutation within the mutational hot spots of the TP53 gene, the twelfth is wild-type in this region of the gene. The mutations are amino acid (aa) 128: C to T; aa 175: G to A; aa 237: T to C; aa 245: G to A; aa 248: C to T; aa 248: G to A; aa 249: G to T; aa 273: C to T; aa 273: G to A; aa 282: C to T; and aa 328: T to C. These standard reference materials (SRMs), created by site-directed mutagenesis of wild-type TP53 from a human cell line, include the specific mutations most commonly found to be associated with cancer. Their use will improve disease detection by serving as validation materials to monitor errors in measurement methods, including PCR amplification, amplicon separation, and data analysis from different technology platforms. Methods and results: The single point mutations of the panel were validated by capillary electrophoresis single-strand conformational polymorphism analysis, denaturing gradient gel electrophoresis, and denaturing high-performance liquid chromatography, as well as full sequence analysis of both DNA strands of the cloned material. For both heteroduplex analysis methods, the presence of the mutations was resolved for each SRM. Conclusion: The generation of a standard TP53 reference panel and demonstration that the panel can successfully validate mutation detection across different mutation scanning technology platforms. Hence, this panel functions as an SRM to normalize results obtained from different laboratories using different techniques.