Dong Nyoung Heo

Electrospun gelatin/polyurethane blended nanofibers for wound healing

In this study, we prepared a blended nanofiber scaffold using synthetic and natural polymers, polyurethane (PU) and gelatin respectively, using the electrospinning method to prepare a material for wound dressing. In order to confirm the properties of this gelatin/PU blended nanofiber scaffold, we performed scanning electron microscopy, atomic force microscopy, attenuated total reflectance Fourier-transform infrared spectroscopy, thermal gravimetric analysis, contact angle, water uptake, mechanical property, recovery, and degradation tests, and cellular response. The results obtained indicate that the mean diameter of these nanofibers was uniformly electrospun and ranged from 0.4 to 2.1 microm. According to the results, when the amount of gelatin in the blended solution decreased, the contact angle increased and water uptake of the scaffold decreased concurrently. In the mechanical tests, the blended nanofibrous scaffolds were elastic, and elasticity increased as the total amount of PU increased. Moreover, as the total amount of gelatin increased, the cell proliferation increased with the same amount of culture time. Therefore, this gelatin/PU blended nanofiber scaffold has potential application for use as a wound dressing.

Photo-cured hyaluronic acid-based hydrogels containing simvastatin as a bone tissue regeneration scaffold

We describe in this study the positive influences on in vitro and in vivo osteogenesis of photo-cured hyaluronic acid (HA) hydrogels loaded with simvastatin (SIM). Prior to loading SIM, we first characterized the HA hydrogels for their mechanical properties and swelling ratios. The results from this testing indicated that these two factors improved as the substitution degree of 2-aminoethyl methacrylate (AEMA) increased. MTT and live/dead assays showed that the HA hydrogels have good biocompatibility for use as scaffolds for bone tissue regeneration. Moreover, another MTT assay showed that the photo-cured HA hydrogels III fabricated with 30% AEMA (300 mg) conjugated HA (HA-AEMA iii) loaded with between 0.1 and 1 mg of SIM had a similar cytotoxicity as compared to the HA hydrogel III itself. The sustained release of SIM was observed to occur in the HA hydrogel III loaded with 1 mg of SIM. In vitro and in vivo experiments showed that the HA hydrogel III loaded with 1 mg of SIM had a significant influence on osteogenesis.

Electrospun chitosan nanofibers with controlled levels of silver nanoparticles. Preparation, characterization and antibacterial activity

The ideal wound dressing would have properties that allow for absorption of exudates, and inhibition of microorganism for wound protection. In this study, we utilized an electrospinning (ELSP) technique to design a novel wound dressing. Chitosan (CTS) nanofibers containing various ratios of silver nanoparticles (AgNPs) were obtained. AgNPs were generated directly in the CTS solution by using a chemical reduction method. The formation and presence of AgNPs in the CTS/AgNPs composite was confirmed by x-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV) and thermogravimetric analysis (TGA). The electrospun CTS/AgNPs nanofibers were characterized morphologically by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These nanofibers were subsequently tested to evaluate their antibacterial activity against gram-negative Pseudomonas aeruginosa (P. aeruginosa) and gram-positive Methicillin-resistant Staphylococcus aureus (MRSA). Results of this antibacterial testing suggest that CTS/AgNPs nanofibers may be effective in topical antibacterial treatment in wound care.

Enhanced bone regeneration with a gold nanoparticle–hydrogel complex

Gold nanoparticles (GNPs) are widely used in diagnostics, drug delivery, biomedical imaging, and photo-thermal therapy due to their surface plasmon resonance, fluorescence, and easy-surface functionalization. According to recent studies, GNPs display a positive effect on the osteogenic differentiation of mesenchymal stem cells (MSCs) and MC3T3-E1 osteoblast-like cells. The aim of this study was to develop a new approach for bone tissue regeneration based on the utilization of a biodegradable hydrogel loaded with GNPs. We have used photo-curable gelatin hydrogels (Gel) in order to provide a proof of principle of GNPs in regeneration strategies for bone tissue repair. We have investigated the effects of these Gel-GNP composite hydrogels both in vitro and in vivo. The in vitro results showed that the hydrogels loaded with GNPs promote proliferation, differentiation, and alkaline phosphate (ALP) activities of human adipose-derived stem cells (ADSCs) as they differentiate towards osteoblast cells in a dose-dependent manner. Moreover, the in vivo results showed that these hydrogels loaded with high concentrations of GNPs had a significant influence on new bone formation. Through these in vitro and vivo tests, we found that the Gel-GNP can be a useful material for bone tissue engineering.

The effect of gold nanoparticle size on osteogenic differentiation of adipose-derived stem cells.

There have been many medical applications based on gold nanoparticles (GNPs) over the past several centuries. Recently, researchers have focused on bone tissue engineering applications utilizing GNPs. The effect of various sizes of gold nanoparticles on the differentiation of human adipose-derived stem cells (ADSCs) into osteoblasts was investigated. The concentration of gold nanoparticles was fixed at 1 μM and varying sizes of 15, 30, 50, 75 and 100 nm (spherical GNPs) were used. The lack of cytotoxicity was confirmed by establishing viability of ADSCs using cell counting kit-8 (CCK-8) and live/dead assays. The results showed that each size of GNPs had no significant toxicity on ADSCs during 1 week of incubation. Osteogenic differentiation of ADSCs was confirmed by alkaline phosphatase (ALP) staining, ALP activity, calcium deposition, and real time PCR experiments. It was found, through dark field assays and microscope cell images, that 30 nm and 50 nm GNPs were preferentially up taken into the ADSCs. As expected, all sizes of gold nanoparticles promoted the differentiation of ADSCs toward osteoblasts more than control. Among all sizes, 30 and 50 nm GNPs appeared to have the highest differentiation rates. The data consistently demonstrated that 30 and 50 nm GNPs are the most effective in promoting osteogenic differentiation of ADSCs.

Photo-cured hyaluronic acid-based hydrogels containing growth and differentiation factor 5 (GDF-5) for bone tissue regeneration

In this study we describe the generation and influences on in vitro and in vivo osteogenesis of photo-cured hyaluronic acid (HA) hydrogels loaded with growth and differentiation factor 5 (GDF-5). Prior to loading GDF-5, we characterized the release profiles from these hydrogels and tested their respective cell viability, differentiation and in vivo bone regeneration. The results from this testing indicated that GDF-5 was observed to release in a sustained manner from the HA hydrogels I-III. MTT and Live/Dead assays showed that the HA hydrogels I-III have good biocompatibility for use as scaffolds for bone tissue regeneration. In vitro cell tests showed a higher level of MC3T3-E1 cell proliferation and differentiation on HA hydrogels I-III than on HA hydrogel 0. Moreover, in vivo animal tests showed that the HA hydrogels I and III had a significant improvement on osteogenesis. Overall, our results suggest that the HA-based hydrogel is a good biomaterial to deliver osteogenic differentiation factors such as GDF-5, and GDF-5 can be useful as an effective alternative to aid new bone formation.

Inhibition of Osteoclast Differentiation by Gold Nanoparticles Functionalized with Cyclodextrin Curcumin Complexes

Gold nanoparticles (GNPs) have been previously reported to inhibit osteoclast (OC) formation. However, previous research only confirmed the osteoclastogenesis inhibitory effect under in vitro conditions. The aim of this study was to develop a therapeutic agent for osteoporosis based on the utilization of GNPs and confirm their effect both in vitro and in vivo. We prepared β-cyclodextrin (CD) conjugated GNPs (CGNPs), which can form inclusion complexes with curcumin (CUR-CGNPs), and used these to investigate their inhibitory effects on receptor activator of nuclear factor-κb ligand (RANKL)-induced osteoclastogenesis in bone marrow-derived macrophages (BMMs). The CUR-CGNPs significantly inhibited the formation of tartrate-resistant acid phosphatase (TRAP)-positive multinuclear cells in BMMs without inducing cytotoxicity. The mRNA expressions of genetic markers of OC differentiation including c-Fos, nuclear factor of activated T cells 1 (NFATc1), TRAP, and osteoclast associated receptor (OSCAR) were significantly decreased in the presence of CUR-CGNPs. In addition, the CUR-CGNPs inhibited OC differentiation of BMMs through suppression of the RANKL-induced signaling pathway. Additionally, CUR-CGNPs caused a decrease in RANKL-induced actin ring formation, which is an essential morphological characteristic of OC formation allowing them to carry out bone resorption activity. Furthermore, the in vivo results of an ovariectomy (OVX)-induced osteoporosis model showed that CUR-CGNPs significantly improved bone density and prevented bone loss. Therefore, CUR-CGNPs may prove to be useful as therapeutic agents for preventing and treating osteoporosis.

Multifunctional hydrogel coatings on the surface of neural cuff electrode for improving electrode-nerve tissue interfaces

UNLABELLED Recently, implantable neural electrodes have been developed for recording and stimulation of the nervous system. However, when the electrode is implanted onto the nerve trunk, the rigid polyimide has a risk of damaging the nerve and can also cause inflammation due to a mechanical mismatch between the stiff polyimide and the soft biological tissue. These processes can interrupt the transmission of nerve signaling. In this paper, we have developed a nerve electrode coated with PEG hydrogel that contains poly(lactic-co-glycolic) acid (PLGA) microspheres (MS) loaded with anti-inflammatory cyclosporin A (CsA). Micro-wells were introduced onto the electrode in order to increase their surface area. This allows for loading a high-dose of the drug. Additionally, chemically treating the surface with aminopropylmethacrylamide can improve the adhesive interface between the electrode and the hydrogel. The surface of the micro-well cuff electrode (MCE) coated with polyethylene glycol (PEG) hydrogel and drug loaded PLGA microspheres (MS) were characterized by SEM and optical microscopy. Additionally, the conductive polymers, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT/PSS), were formed on the hydrogel layer for improving the nerve signal quality, and then characterized for their electrochemical properties. The loading efficiencies and release profiles were investigated by High Performance Liquid Chromatography (HPLC). The drug loaded electrode resulted in a sustained release of CsA. Moreover, the surface coated electrode with PEG hydrogel and CsA loaded MP showed a significantly decreased fibrous tissue deposition and increased axonal density in animal tests. We expect that the developed nerve electrode will minimize the tissue damage during regeneration of the nervous system. STATEMENT OF SIGNIFICANCE The nerve electrodes are used for interfacing with the central nervous system (CNS) or with the peripheral nervous system (PNS). The interface electrodes should facilitate a closed interconnection with the nerve tissue and provide for selective stimulation and recording from multiple, independent, neurons of the neural system. In this case, an extraneural electrodes such as cuff and perineural electrodes are widely investigated because they can completely cover the nerve trunk and provide for a wide interface area. In this study, we have designed and prepared a functionalized nerve cuff electrode coated with PEG hydrogel containing Poly lactic-co-glycol acid (PLGA) microspheres (MS) loaded with cyclosporine A (CsA). To our knowledge, our findings suggest that surface coating a soft-hydrogel along with an anti-inflammatory drug loaded MS can be a useful strategy for improving the long-term biocompatibility of electrodes.

Titanium dental implants surface-immobilized with gold nanoparticles as osteoinductive agents for rapid osseointegration

Gold nanoparticles (GNPs) are quite attractive materials for use as osteogenic agents due to their potential effects on the stimulation of osteoblast differentiation. In this study, an osseo-integrated titanium (Ti) implant surface coated with GNPs was used for promotion of bone regeneration. We prepared a silanized Ti surface by chemical treatment of (3-Mercaptopropyl) trimethoxysilane (MPTMS) and immobilized the GNP layer (Ti-GNP) on their surfaces via Au-S bonding. The GNP layer is uniformly immobilized on the surface and the layer covers the titanium oxide surface well, as confirmed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The Ti-GNP was used to investigate the effectiveness of this system both in vitro and in vivo. The in vitro results showed that the Ti-GNP significantly enhances the osteogenic differentiation with increased mRNA expression of osteogenic differentiation specific genes in human adipose-derived stem cells (ADSCs). Furthermore, the in vivo results showed that Ti-GNP had a significant influence on the osseous interface formation. Through these in vitro and vivo tests, we found that Ti-GNP can be useful as osseo-integration inducing dental implants for formation of an osseous interface and maintenance of nascent bone formation.

Poly(l-Lactic Acid)/Gelatin Fibrous Scaffold Loaded with Simvastatin/Beta-Cyclodextrin-Modified Hydroxyapatite Inclusion Complex for Bone Tissue Regeneration

Recently, the application of nanostructured materials in the field of tissue engineering has garnered attention to mediate treatment and regeneration of bone defects. In this study, poly(l-lactic acid) (PLLA)/gelatin (PG) fibrous scaffolds are fabricated and β-cyclodextrin (βCD) grafted nano-hydroxyapatite (HAp) is coated onto the fibrous scaffold surface via an interaction between βCD and adamantane. Simvastatin (SIM), which is known to promote osteoblast viability and differentiation, is loaded into the remaining βCD. The specimen morphologies are characterized by scanning electron microscopy. The release profile of SIM from the drug loaded scaffold is also evaluated. In vitro proliferation and osteogenic differentiation of human adipose derived stem cells on SIM/HAp coated PG composite scaffolds is characterized by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red S staining), and real time Polymerase chain reaction (PCR). The scaffolds are then implanted into rabbit calvarial defects and analyzed by microcomputed tomography for bone formation after four and eight weeks. These results demonstrate that SIM loaded PLLA/gelatin/HAp-(βCD) scaffolds promote significantly higher ALP activity, mineralization, osteogenic gene expression, and bone regeneration than control scaffolds. This suggests the potential application of this material toward bone tissue engineering.