Doris Hansmann

The potential role of human osteoblasts for periprosthetic osteolysis following exposure to wear particles

Aseptic loosening in total hip replacement is mainly caused by wear particles inducing inflammation and osteolysis. Wear can be a consequence of micromotions at the interface between implant and bone cement. Due to complex cellular interactions, different mediators (e.g. cytokines, proteinases) are released, which can promote osteolytic processes in the periprosthetic tissue followed by loosening of the implant. Furthermore, a reduced matrix synthesis and an induced apoptosis rate can be observed. The purpose of this study was to evaluate to what extent human primary osteoblasts exposed to wear particles are involved in the osteolysis. The viability, the secretion of collagen and collagenases and the variety of released cytokines after particle exposure was examined. Therefore, human osteoblasts were incubated with particles experimentally generated in the interface between hip stems with rough and smooth surface finishings as well as different material compositions (Ti-6Al-7Nb, Co-28Cr-6Mo and 316L) and bone cement mantle made of Palacos R containing zirconium oxide particles. Commercially pure titanium particles, titanium oxide, polymethylmethacrylate and particulate zirconium oxide were used as references. The results revealed distinct effects on the cytokine release of human osteoblasts towards particulate debris. Thereby, human osteoblasts released increased levels of interleukine (IL)-6 and IL-8 after treatment with metallic wear particles. The expression of VEGF was slightly induced by all particle entities at lower concentrations. Apoptotic rates were enhanced for osteoblasts exposed to all the tested particles. Furthermore, the de novo synthesis of type 1 collagen was reduced and the expression of the matrix metalloproteinase (MMP)-1 was considerably increased. However, wear particles of Co-28Cr-6Mo stems seemed to be more aggressive, whereas particles derived from stainless steel stems caused less adverse cellular reaction. Among the reference particles, which caused less altered reactions in the metabolism of osteoblasts in general, ZrO2 can be assumed as the material with the smallest cell biological effects.

Response of human osteoblasts exposed to wear particles generated at the interface of total hip stems and bone cement

Aseptic loosening of total hip replacement is mainly caused by wear particles. Abrasive wear occurs at articulating surfaces or as a consequence of micro-motions at the interface between femoral stem and bone cement. Direct impact of wear particles on osteolysis, the remodeling of the bone stock and a directly affected function of osteoblasts was described. The present study examined the response of human osteoblasts exposed to different wear particles, which were generated in a test device providing oscillating micro-motions at the interface between femoral stem and standard bone cement. Characterization of released particles was performed by quantifying the size distribution and the metal content of the wear debris. Human osteoblasts were incubated with particles obtained from hip stems with different material compositions (Ti-6Al-7Nb and Co-28Cr-6Mo) and rough and smooth surface finishings combined with standard bone cement (Palacos(R) R) containing zirconium oxide particles. Commercially pure titanium particles (cp-Ti) and particulate zirconium oxide (ZrO(2)) were used for comparative analyses. The results revealed significant (p < 0.05) reduction of the cell viability after exposure to higher concentration of metallic particles, particularly from Co-based alloys. In contrast, ZrO(2) alone showed significantly less adverse effects on the cells. When increasing metallic particle concentrations massive inhibition was also observed in the release of cytokines including interleukine-6 (IL-6) and interleukine-8 (IL-8), but the expression of Procollagen I and the cell viability showed the highest reduction after exposure to Co-based alloy particles from rough stems.

Differentiation Capacity of Human Chondrocytes Embedded in Alginate Matrix

Healing capacity of cartilage is low. Thus, cartilage defects do not regenerate as hyaline but mostly as fibrous cartilage which is a major drawback since this tissue is not well adapted to the mechanical loading within the joint. During in vitro cultivation in monolayers, chondrocytes proliferate and de-differentiate to fibroblasts. In three-dimensional cell cultures, de-differentiated chondrocytes could re-differentiate toward the chondrogenic lineage and re-express the chondrogenic phenotype. The objective of this study was to characterize the mesenchymal stem cell (MSC) potential of human chondrocytes isolated from articular cartilage. Furthermore, the differentiation capacity of human chondrocytes in three-dimensional cell cultures was analyzed to target differentiation direction into hyaline cartilage. After isolation and cultivation of chondrogenic cells, the expression of the MSC-associated markers: cluster of differentiation (CD)166, CD44, CD105, and CD29 was performed by flow cytometry. The differentiation capacity of human chondrocytes was analyzed in alginate matrix cultured in Dulbecco’s modified eagle medium with (chondrogenic stimulation) and without (control) chondrogenic growth factors. Additionally, the expression of collagen type II, aggrecan, and glycosaminoglycans was determined. Cultivated chondrocytes showed an enhanced expression of the MSC-associated markers with increasing passages. After chondrogenic stimulation in alginate matrix, the chondrocytes revealed a significant increase of cell number compared with unstimulated cells. Further, a higher synthesis rate of glycosaminoglycans and a positive collagen type II and aggrecan immunostaining was detected in stimulated alginate beads. Human chondrocytes showed plasticity whilst cells were encapsulated in alginate and stimulated by growth factors. Stimulated cells demonstrated characteristics of chondrogenic re-differentiation due to collagen type II and aggrecan synthesis.

TGF-β1 and IGF-1 influence the re-differentiation capacity of human chondrocytes in 3D pellet cultures in relation to different oxygen concentrations.

To prevent de-differentiation of chondrocytes in vitro, the 3D environment, growth factors and different oxygen concentrations were considered. In this in vitro study, we quantified the influence of insulin-like growth factor (IGF)-1 and/or transforming growth factor (TGF)-β1 under differing oxygen (5/21% O(2)) levels on the proliferation and synthesis rates of hyaline extracellular matrix (ECM) components in chondrogenic pellet cultures. Human chondrocytes isolated from articular cartilage were transferred into conical tubes to form pellets. Pellets were stimulated with TGF-β1 and/or IGF-1. After 2 and 5 weeks of cultivation the DNA concentration and expression of pro-collagen type 1, type 2 and aggrecan were analysed. Under hypoxia the DNA content remained stable. In contrast, under normoxia, cells showed an increase of DNA concentration after stimulation with TGF-β1/IGF-1 and TGF-β1. Nevertheless, DNA contents under normoxia did not reach the values of hypoxic-cultivated cells. Under both culture conditions a reduced synthesis of pro-collagen type 1 could be determined. Although the expression of pro-collagen type 2 was significantly higher under normoxia, a decrease in the case of TGF-β1/IGF-1- and IGF-1-stimulated cells was observed. Under hypoxia pro-collagen type 2 contents remained stable or increased for TGF-β1/IGF-1-stimulated cells. Furthermore, incubation with growth factors resulted in aggrecan accumulation under hypoxia, while a reduced expression under normoxia could be determined for TGF-β1/IGF-1- and IGF-1-stimulated cells. Our results demonstrate that the treatment with growth factors causes differences in the expression of ECM compounds within pellet cultures. While under normoxia TGF-β1 alone leads to a positive effect of the expression of hyaline cartilage-specific ECM components, an additive effect of both growth factors was only determined under hypoxia.

Comparative Analysis of the Oxygen Supply and Viability of Human Osteoblasts in Three-Dimensional Titanium Scaffolds Produced by Laser-Beam or Electron-Beam Melting

Synthetic materials for bone replacement must ensure a sufficient mechanical stability and an adequate cell proliferation within the structures. Hereby, titanium materials are suitable for producing patient-individual porous bone scaffolds by using generative techniques. In this in vitro study, the viability of human osteoblasts was investigated in porous 3D Ti6Al4V scaffolds, which were produced by electron-beam (EBM) or laser-beam melting (LBM). For each examination, two cylindrical scaffolds (30 mm × 10 mm in size, 700 µm × 700 µm macropores) were placed on each other and seeded with cells. The oxygen consumption and the acidification in the center of the structures were investigated by means of microsensors. Additionally, the synthesis of pro-collagen type 1 was analyzed. On the LBM titanium scaffolds, vital bone cells were detected in the center and in the periphery after 8 days of cultivation. In the EBM titanium constructs, however, vital cells were only visible in the center. During the cultivation period, the cells increasingly produced procollagen type 1 in both scaffolds. In comparison to the periphery, the oxygen content in the center of the scaffolds slightly decreased. Furthermore, a slight acidification of the medium was detectable. Compared to LBM, the EBM titanium scaffolds showed a less favorable behavior with regard to cell seeding.

Cell viability, collagen synthesis and cytokine expression in human osteoblasts following incubation with generated wear particles using different bone cements

In total hip arthroplasty, wear particles generated at articulating surfaces and interfaces between bone, cement and implants have a negative impact on osteoblasts, leading to osteolysis and implant loosening. The aim of this experimental study was to determine the effects of particulate wear debris generated at the interface between straight stainless steel hip stems (Exeter(®)) and three different bone cements (Palacos(®) R, Simplex™ P and Cemex(®) Genta) on cell viability, collagen synthesis and cytokine expression in human osteoblasts. Primary osteoblasts were treated with various concentrations of wear particles. The synthesis of procollagen type I and different cytokines was analysed, and markers for apoptosis and necrosis were also detected. The cytokine synthesis rates in the osteoblasts were initially increased and varied, depending on incubation time and particle concentration. Specific differences in the synthesis rates of interleukin (IL)‑6, IL-8, vascular endothelial growth factor (VEGF) and monocyte chemotactic protein-1 (MCP-1) were observed with the different bone cements examined. The negative effect of the particles on the synthesis of procollagen type I and increased rates of cell apoptosis and necrosis were observed with all three cements analysed. Our present data suggest that wear particles from the interface between the total hip stem and bone cement have a significant effect on viability, cytokine expression and collagen synthesis in human osteoblasts, depending on the bone cement used.

Contribution of human osteoblasts and macrophages to bone matrix degradation and proinflammatory cytokine release after exposure to abrasive endoprosthetic wear particles

One of the major reasons for failure after total joint arthroplasty is aseptic loosening of the implant. At articulating surfaces, defined as the interface between implant and surrounding bone cement, wear particles can be generated and released into the periprosthetic tissue, resulting in inflammation and osteolysis. The aim of the present study was to evaluate the extent to which osteoblasts and macrophages are responsible for the osteolytic and inflammatory reactions following contact with generated wear particles from Ti-6Al-7Nb and Co-28Cr-6Mo hip stems. To this end, human osteoblasts and THP-1 monocytic cells were incubated with the experimentally generated wear particles as well as reference particles (0.01 and 0.1 mg/ml) for 48 h under standard culture conditions. To evaluate the impact of these particles on the two cell types, the release of different bone matrix degrading matrix metalloproteinases (MMPs), tissue inhibitors of MMPs (TIMPs), and relevant cytokines were determined by multiplex enzyme-linked immunosorbent assays. Following incubation with wear particles, human osteoblasts showed a significant upregulation of MMP1 and MMP8, whereas macrophages reacted with enhanced MMP3, MMP8 and MMP10 production. Moreover, the synthesis of TIMPs 1 and 2 was inhibited. The osteoblasts and macrophages also responded with modified expression of the inflammatory mediators interleukin (IL)-6, IL-8, monocyte chemoattractant protein-1 and vascular endothelial growth factor. These results demonstrate that the release of wear particles affects the release of proinflammatory cytokines and has a negative impact on bone matrix formation during the first 48 h of particle exposure. Human osteoblasts are directly involved in the proinflammatory cascade of bone matrix degradation. The simultaneous activation and recruitment of monocytes/macrophages boosted osteolytic processes in the periprosthetic tissue. By the downregulation of TIMP production and the concomitant upregulation of MMPs as a response to particle exposure, bone formation around implants may be suppressed, resulting in implant failure.

Migration Capacity and Viability of Human Primary Osteoblasts in Synthetic Three-dimensional Bone Scaffolds Made of Tricalciumphosphate

In current therapeutic strategies, bone defects are filled up by bone auto- or allografts. Since they are limited by insufficient availability and donor site morbidity, it is necessary to find an appropriate alternative of synthetic porous bone materials. Because of their osteoconductive characteristics, ceramic materials like tricalciumphosphate (TCP) are suitable to fill up bone defects. Another advantage of TCP implants is the ability of patient-specific engineering. Objective of the present in-vitro study was to analyze the migration capacity and viability of human primary osteoblasts in porous three-dimensional TCP scaffolds in a static cell culture. To obtain data of the cellular supply with nutrients and oxygen, we determined the oxygen concentration and the pH value within the 3D scaffold compared to the surrounding medium using microsensors. After eight days of cultivation we found cells on all four planes. During incubation, the oxygen concentration within the scaffold decreased by approximately 8%. Furthermore, we could not demonstrate an increasing acidification in the core of the TCP scaffold. Our results suggest that osteoblasts could migrate and survive within the macroporous TCP scaffolds. The selected size of the macropores prevents overgrowth of cells, whereby the oxygen and nutrients supply is sufficiently guaranteed.

Magnetically induced electrostimulation of human osteoblasts results in enhanced cell viability and osteogenic differentiation

The application of electromagnetic fields to support the bone-healing processes is a therapeutic approach for patients with musculoskeletal disorders. The ASNIS-III s-series screw is a bone stimulation system providing electromagnetic stimulation; however, its influence on human osteoblasts (hOBs) has not been extensively investigated. Therefore, in the present study, the impact of this system on the viability and differentiation of hOBs was examined. We used the ASNIS-III s screw system in terms of a specific experimental test set-up. The ASNIS-III s screw system was used for the application of electromagnetic fields (EMF, 3 mT, 20 Hz) and electromagnetic fields combined with an additional alternating electric field (EMF + EF) (3 mT, 20 Hz, 700 mV). The stimulation of primary hOBs was conducted 3 times per day for 45 min over a period of 72 h. Unstimulated cells served as the controls. Subsequently, the viability, the gene expression of differentiation markers and pro-collagen type 1 synthesis of the stimulated osteoblasts and corresponding controls were investigated. The application of both EMF and EMF + EF using the ASNIS-III s screw system revealed a positive influence on bone cell viability and moderately increased the synthesis of pro-collagen type 1 compared to the unstimulated controls. Stimulation with EMF resulted in a slightly enhanced gene expression of type 1 collagen and osteocalcin; however, stimulation with EMF + EF resulted in a significant increase in alkaline phosphatase (1.4-fold) and osteocalcin (1.6-fold) levels, and a notable increase in the levels of runt-related transcription factor 2 (RUNX-2; 1.54-fold). Our findings demonstrate that stimulation with electromagnetic fields and an additional alternating electric field has a positive influence on hOBs as regards cell viability and the expression of osteoblastic differentiation markers.

Gene expression analysis of growth factor receptors in human chondrocytes in monolayer and 3D pellet cultures

The main goal of cartilage repair is to create functional tissue by enhancing the in vitro conditions to more physiological in vivo conditions. Chondrogenic growth factors play an important role in influencing cartilage homeostasis. Insulin-like growth factor (IGF)-1 and transforming growth factor (TGF)-β1 affect the expression of collagen type II (Col2) and glycosaminoglycans (GAGs) and, therefore, the targeted use of growth factors could make chondrogenic redifferentiation more efficient. In the present study, human chondrocytes were postmortally isolated from healthy articular cartilage and cultivated as monolayer or 3D pellet cultures either under normoxia or hypoxia and stimulated with IGF-1 and/or TGF-β1 to compare the impact of the different growth factors. The mRNA levels of the specific receptors (IGF1R, TGFBR1, TGFBR2) were analyzed at different time points. Moreover, gene expression rates of collagen type 1 and 2 in pellet cultures were observed over a period of 5 weeks. Additionally, hyaline-like Col2 protein and sulphated GAG (sGAG) levels were quantified. Stimulation with IGF-1 resulted in an enhanced expression of IGF1R and TGFBR2 whereas TGF-β1 stimulated TGFBR1 in the monolayer and pellet cultures. In monolayer, the differences reached levels of significance. This effect was more pronounced under hypoxic culture conditions. In pellet cultures, increased amounts of Col2 protein and sGAGs after incubation with TGF-β1 and/or IGF-1 were validated. In summary, constructing a gene expression profile regarding mRNA levels of specific growth factor receptors in monolayer cultures could be helpful for a targeted application of growth factors in cartilage tissue engineering.